• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.8
• /
• pp.1420-1431
• /
• 2001

This research was done to classify lower body types by direct measurements, side and back view types from waistline to gluteal furrow line individually, and to analyze correspondence these lower body types with side and back view types from waistline to gluteal furrow line. The subjects of this study were 191 female college students from 18 to 25 years old residing in Pusan urban area. Type 1(long and slim) of lower body types by direct measurements was correspond with Type 1(slim curve) and Type 4(slim and protrusive hip) of side view and Type 3(wide and curve) and Type 4(trapezoid shape) of back view. Type 2(short and thick) of lower body types was correspond with Type 3(thick and droopy hip) of side view and Type 1(wide and straight) of back view. Type 3(short and slim) of lower body types was correspond with Type 2(slim and flat hip) of side view and Type 2(narrow and curve) of back view.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.7
• /
• pp.758-769
• /
• 2003

In this research, I classified adult women's back types through anthropometric measurement and photographic measurement to present a judging individual body size according to the type. Also, Ⅰ calculated regression fomula by types and presented the basic bodice pattern. The results were as follows: 1. The result of factor analysis indicated that 5 factors were extracted and those factors comprised 75.89% of total variance. 2. According to the cluster analysis, Ⅰclassified the back types into 6 types. Type 1 was passive posture in the upper and the lower parts of the back. Type 2 was active posture in the upper and the lower parts of the back. Type 3 had the lowest protrusion of the back. Type 4 had the upper part of the back which is mostly bent downward. Type 5 was the most suitable shape. Type 6 had the lower part of the back which was turned over the most. 3. Ⅰconducted a discriminant analysis to judge the body types of individuals. 4. For the calculation of measurements necessary for the basic bodice pattern, Ⅰpresented regression formulas by each type. 5. By conducting the wearing experiments, Ⅰsuccessfully made the final basic bodice patterns by types. As a result of comparative experiments between the basic bodice patterns and comparison bodice pattern, the suitability of basic bodice patterns were more highly assessed.

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.357-366
• /
• 2004

The purpose of this study is to classify the types of men's back and chest through the criteria which represent the characteristic of men's back and chest. We have the following conclusions based on our sample size of 291 men's back and chest. The result of factor analysis concerned with men's back indicates that six factors are extracted and they are consist of 80.6% of total variance. We divide the shape of back into three categories: bent, protrusion of the scapula, and breadth. Each category is divided into subcategories. According to the frequency based on our data entries of 291 men's back, we introduce five new types of men's back. 83.8% of examined men's back belong to one of these five types: (i) 15.5% of protrudent and lordotic type; (ii) 6.5% of flat and lordotic type; (iii) 22.7% of protrudent and normal type; (iv) 34.4% of flat and normal type; (v) 4.8% of flat and bent type. The result of factor analysis related to with men's chest shows that six factors are extracted and they are consist of 76.0% of total variance. We divide the shape of chest into three categories: thickness, breadth, and protrusion of the breast. Each category is divided into subcategories. According to the frequency based on our data entries of 291 men's chest, we introduce four new types of men's chest. 65.0% of examined men's chest belong to one of these four types: (i) 7.2% of full and well-developed type; (ii) 24.1% of full and developed type; (iii) 25.8% of flat and developed type; (iv) 7.9% of flat and under-developed type. In order to consider the shape of the upper body as a whole, the back and the chest types should be corresponded.

• The Korean Journal of Rehabilitation Nursing
• /
• v.11 no.1
• /
• pp.5-12
• /
• 2008

Purpose: The purpose of this study was to identify the uses of complementary and alternative therapies(CAT), pain, and quality of life(QOL) in patients with chronic back pain. Method: A descriptive survey was conducted using convenient sample. One hundred sixty two patients with chronic back pain participated in this study. Types and satisfaction of CAT, pattern of back pain, and QOL were investigated. Result: 83.3% of all participants reported in the use of CAT. The most common types of CAT used were acupuncture and half-bath. Yoga were the most high satisfaction among the types. The mean score of back pain was 4.12, QOL was 3.10, that was mostly low score. There was no significant difference back pain and QOL between CAT user and nonuser. Correlation with satisfaction of CAT according the most using types were a negative correlation with back pain and a positive correlation with QOL. Conclusion: These result indicate that the mostly patients with back pain feels the satisfaction of CAT use. It is important that provide the obvious information about CAT which can be helpful to patient.

• Journal of the Korean housing association
• /
• v.18 no.2
• /
• pp.65-74
• /
• 2007

The study analyzes the remodeling characteristics of the four different types of secondary kitchens in apartment house based on their floor plans. The secondary kitchens are categorized into side placement, back placement, back placement with extensions on both sides, and back placement with an extension on a single side. The twelve apartment complexes in Ulsan were selected so that they may all consist each of the four types, and answered the survey. The classified traits of secondary kitchen were examined based on the characteristics of floor plan and remodeling. Side placement and back placement with extensions on both sides mostly used glass hinged doors. Back placement and back placement with a single side extension used glass sliding doors. It was found that the majority of the floor materials consisted of both wood and tiles, except for side placements, where only tiles were used. The sizes of the back placements with both and single side extensions were the largest. The side and back placements were rarely renovated, however, back placements with both and single side extensions went through massive remodeling.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.3
• /
• pp.459-469
• /
• 1993

The purpose of this study is to investigate the relationship between body-types and skirt-patterns by analyzing various fitting conditions of the skirt patterns in relation to the body-types. To achieve this, fitting tests were done on six types of skirt-patterns. The tests included four body-types selected according to the existing classification of the types of under part of the body. Sensory tests were performed on the existing patterns and new drafting method based on the results of the fitting tests. The results of the fitting tests and sensory test are as follows. 1. The existing skirt-patterns were relatively well-fitted except for certain parts in standard somatotype (body-type A). 2. The new drafting method, designed on the basis of the fitting test on the existing patterns, scored high on all of the eighteen items included in the test This signifies the excellence of the new drafting method. 3. In the case of the allocation between the front and the back, which is the difference between the educational patterns and industrial patterns, the best silhouette was achieved when the hip-line and the waist-line were same sized both in the back and in the front. However, in the case of body-type D it was better when there was a 1cm difference between the back and the front. 4. The number of darts that best fits young persons were found to be eight, to keep their side hip-curve smooth. Further, it is desirable to set the center line of the dart as the vertical waist-line. 5. The best length of the darts were determined to be 12.5cm, 11ch in the back, and 11cm, 9.5cm in the front. Adjustments would be made according to the differing body-types in the range of 0.5cm. 6. The lowerness of the back waist-line for the normal was determined at 1.5cm, with some variations in other body-types. 7. The front waist-line was needed to be 1cm lowered in the case of body-type B, whereas, in the case of body-type D, it was needed to be 1cm raised.

• The Research Journal of the Costume Culture
• /
• v.8 no.5
• /
• pp.754-770
• /
• 2000

The definite objects of this study are as follows ; 1. The study presents concrete objects of the shape of adult women's neck and shoulder after comparing and analyzing the features of five age groups ; the former young age, the latter young age, the former middle age, the latter middle age, the latter middle age and the old age. 2. The study presents concrete objects of adult women's neck and shoulder by the body types ; bend-forward type, straight type and lean-back type in order to be examined the body types. The results of this study are as follows ; 1. The shape of neck and shoulder needs the several concrete objects of each types because of the variable factors in size and body types. But the concrete objects of the types referred in five age groups contain all the important factors and enable to design the body suitable clothes. 2. This study shows that generally bend-forward type contains rising shoulder and lean-back type contains drooping shoulder, and straight type contains average value of neck and shoulder. The results of this study developed the body-suitable clothes of bend-forward type, straight type and lean-back type.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.291-304
• /
• 1997

The purposes of this study were to evaluate the changes in root canal configuration with canal instrumentation using different file types and techniques and to investigate most appropriate instrumentation technique in maintaining the original canal configuration with different file types. Fifty curved mesiobuccal or distobuccal canals of extracted human maxillary molar teeth were instrumented using a step-back technique with stainless steel K-files or nickel-titanium K-files, a crown-down pressureless technique with stainless steel K-files or nickel-titanium K-files and nickel-titanium engine-driven files. Radiographs were taken before and after instrumentation using a specially designed device that allowed for the pre-and postinstrumentation canals to be taken with the same X-ray angulation. Magnified X-ray images on a magnifier screen were traced and post instrumentation canal images were compared with the preinstrumentation ones. Changes in canal curvature and the incidence of procedural accidents were analyzed. The results were as follows : Crown-down pressureless technique with nickel-titanium K-files and nickel-titanium engine-driven filing produced no significant changes in canal curvature (p>0.05), while the step-back technique with stainless steel K-files or nickel-titanium K-files (p<0.01) and the crown-down pressureless technique with stainless steel K-files (p<0.05) produced significant changes. With nickel-titanium K-file, crown-down pressureless technique produced significantly less changes in canal curvature than step-back technique (p<0.05), while there was no significant difference between techniques with stainless steel K-files (p>0.05). File types exerted no significant influences in the changes of canal curvature both in the step-back technique and crown-down pressureless technique (0>0.05). Regardless of the file types used, step-back technique produced more procedural accidents such as ledge or elbow formation, apical zipping and apical transportation than the crowndown pressureless technique and nickel-titanium engine-driven filing. Both with stainless steel K-files and with nickel-titanium K-files, the incidence of apical extrusion of canal debris was higher in step-back technique than in crown-down pressureless technique.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.3
• /
• pp.680-687
• /
• 2004

A study on the correlation between four GCM types and Dam and Bangkwang types of Hyungsang medicine comes to the following conclusions : GCM I type is closely related to Bangkwang type in Hyungsang medicine. GCM II type corresponds to Dam type. In terms of obesity and emaciation, GCM I type is related to obesity and GCM II type to emaciation. In terms of Right and Left, GCM I type is more active in Left, GCM II type in Right. In terms of movement, GCM I and II types are kinetic and GCM III and IV types are static. In terms of Front and Back, the disease of GCM I type usually appears on Back but the treatment starts on Front. In GCM II type, disease mainly occurs on Front but the treatment starts on Back. GCM I type is susceptible to an alimentary disease and constitutionally predisposed to damp-phlegm in Hyungsang medicine. GCM II type is easily affected by a circulatory illness and very vulnerable to heat with blood deficiency and depression and stagnation of Ki.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.35-43
• /
• 2024

This study aimed to objectively classify the lateral torso posture types and functions of older women. We used 3D body scan data of 119 women aged 70-85 years from the 6th SizeKorea project. First, we defined three torso axes to represent the lateral torso posture types: posterior waist-back, back-cervical, and whole torso axes. Next, we asked experts to select one of four lateral torso posture types-stooped, straight, leaning back, and swayback postures-by looking at the lateral photographic data of 119 older women. To identify the axis that best represented each lateral torso posture type, a discriminant analysis was conducted using the angle of each of the three torso axes as an independent variable and an expert's visual classification as a dependent variable. Based on the analysis, the whole torso and backcervical axis angles were selected as variables for judging lateral torso posture types. Subsequently, we developed a classification function to determine which of the four lateral torso posture types of a particular participant was applicable for a new individual. The method developed in this study is significant in that it enables the objective classification of the lateral torso postures types of older women.