• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.9 s.90
• /
• pp.903-909
• /
• 2004

A CFA(cooling fan assembly) is composed of a fan, motor and shroud, which is at the back of the automotive radiator. By forcing the wind to pass, the CFA controls the cooling performance of the radiator. The noise and vibration of the CFA may be primarily due to the resonance between the CFA and engine. The Interference among the fan, shroud and radiator by deformation is considered when the CFA is designed. In this paper, in order to analyze the structural vibration of the CFA for automobiles, a finite element model of the CFA is established by using a commercial FEM code. After the finite element modeling, the natural frequencies and the mode shapes are obtained from the FE analysis. The natural frequencies are obtained from the vibration test as well. Then, the results of the vibration test are compared with those of the FE analysis. The natural frequencies obtained by experiment have a great similarity to the results from FE model. We have confirmed the validity of the FE model and verify the structural safety for the resonance. The stress and displacements are obtained from FE analysis. We have confirmed the safety for the interference and failure.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.4
• /
• pp.411-419
• /
• 2018

This study investigated the survival rates and physiological responses of Korean rockfish, Sebastes schlegeli, in live fish containers ($8^{\circ}C$, 33 psu) for 18 days. The survival rate was 99% and 97% in the control and experimental groups, respectively. Hematocrit and hemoglobin did not differ significantly between the control and experimental groups. Glucose and cortisol rose immediately on the first day of containment, but both gradually normalized. Aspartate aminotransferase and alanine aminotransferase did not differ significantly between the two groups after recovery. $NH_3$ continued to rise after the first day, but decreased to a level not significantly different from that of the control group during the recovery period. Plasma ions and osmolality did not change abnormally. The hemocyte population was not significantly different from that of the control. The ratios of apoptotic and necrotic cells indicated no specific variation in hemocyte viability. The histological changes in the skin and gills were not significantly different from those seen in the control. The experimental data obtained in this study suggest that live fish containers may be used to transport Korean rockfish without significantly affecting their physiology or survival.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.597-603
• /
• 2011

Objective: The objective of this study was to compare one-hand and two-hands lifting activity in terms of biomechanical stress for the range of lifting heights from 10cm above floor level to knuckle height. Background: Even though two-hands lifting activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting are also very common at the industrial site and forestry and farming. Method: Eight male subjects were asked to perform lifting tasks using both a one-handed as well as a two-handed lifting technique. Trunk muscle electromyographic activity was recorded while the subjects performed the lifting tasks. This information was used as input to an EMG-assisted free-dynamic biomechanical model that predicted spinal loading in three dimensions. Results: It was shown that for the left-hand lifting tasks, the values of moment, lateral shear force, A-P shear force, and compressive force were increased by the average 43%, as the workload was increased twice from 7.5kg to 15.0kg. For the right-hand lifting task, these were increased by the average 34%. For the two-hands lifting tasks, these were increased by the average 25%. The lateral shear forces at L5/S1 of one-hand lifting tasks, notwithstanding the half of the workload of two-hands lifting tasks, were very high in the 300~317% of the one of two-hands lifting tasks. The moments at L5/S1 of one-hand lifting tasks were 126~166% of the one of two-hands lifting tasks. Conclusion: It is concluded that the effect of workload for one-hand lifting is greater than two-hands lifting. It can also be concluded that asymmetrical effect of one-hand lifting is much greater than workload effect. Application: The results of this study can be used to provide guidelines of recommended safe weights for tasks involved in one-hand lifting activity.

• Journal of Korean Medicine Rehabilitation
• /
• v.15 no.2
• /
• pp.169-181
• /
• 2005

Objectives : The 5th lumbar - 1st sacrum facet joint is unstable area from an anatomical viewpoint, so that it is clinically major causes of low back pain. The purpose of this study is to assess the difference of the Van Akkerveeken measurement and intervertebral disc angle, Ferguson angle between the 5th lumbar - 1st sacrum facet syndrome patients and sample group patients. Methods : Van Akkerveeken measurement, intervertebral disc angle and Ferguson angle were measured in 30 patients who had 5th lumbar - 1st sacrum facet syndrome and 31 sample group patients. Results : 1. Van Akkerveeken measurement of 5th lumbar - 1st sacrum facet syndrome patients is statistically larger that of than sample group patients. 2. Intervertebral disc angle of the 5th lumbar - 1st sacrum facet syndrome patients is statistically larger that of than sample group patients. 3. Ferguson angle is the 5th lumbar - 1st sacrum facet syndrome patients is statistically larger than that of sample group patients. Conclusions : These results suggest that Van Akkerveeken measurement and intervertebral disc angle is able to be used for diagnosis of facet syndrome.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.4
• /
• pp.121-133
• /
• 2008

Objectives : MENS was used for wound healing and pain relief using bioelectric property. There are many articles on in vivo and clinical research. This article reviews articles on MENS published for recent 10 years to consider effectiveness of MENS and other fields to applicate MENS. Articles were collected from MAR, 2008 to JUN, 2008. Methods : We searched Pubmed, KSI, KERIS, KMBASE, and National assembly library using "Microcurrent Electrical Neuromuscular Stimulation" and classified the articles into subsets of foreign, Korean and wound healing, pain, relief, and increasing the range of movement(ROM). Also we evaluated their values according to the Jadad scale. Results : A total of 18 articles (Foreign-9, Korean-9) reconfirmed that MENS reduces pain, increases wound healing, ROM, and strength of muscle. In addition, MENS has effect on stress-hormone and various pain like low back pain, acute lateral epicondylitis, and plantar fascitis. And there are various styles developed. However, there is no standard protocol so the user is usually in trouble at clinic. Conclusions : MENS may be have application to various pain diseases, and further studies analysing its effectiveness are needed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1-4
• /
• 2008

Flat plate slab has been widely used in high rise building for its remarkable advantages. However, Flat plate structures under lateral load are susceptible to punching shear of the slab-column connection. Exterior slab-column connections has an unsymmetrical critical section for eccentric shear of which perimeter is less than that of interior connection, and hence, around the connection, unbalanced moment and eccentric shear are developed by both gravity load and lateral loads. Therefore, exterior connections is susceptible to punching shear failure. For that reason, this study compare ACI 318-05 to CEB-FIP MC 90 that is based on experiment results and existing data of flat plate exterior connections. This study shows that compared to CEB-FIP MC 90 is more exact about eccentric shear stress, unbalanced moment and Both of all are not suitable in large column aspect ratio. Considering gravity shear ratio, These are suitable but design condition only consider gravity shear ratio. So these should be considered differences from change of design condition

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.3
• /
• pp.81-92
• /
• 2008

Musculoskeletal disorder (MSD) problems have been increasingly reported in hospital sector but the problems were not addressed with respect to holistic aspects of the target population in Korea. Often, it is required to understand how MSD symptoms are associated with factors such as personal, work environmental and psychosocial stressors. To examine features of association between sets of MSD symptoms and the factors, a questionnaire survey was conducted in a university hospital. A 140-item questionnaire was developed and used for collecting information including factors (e.g., job/occupation, task/activity, job stress) and MSD symptoms. A total of 1,091 workers (male 23.7% and female 76.3%) were finally determined for data analyses. Prevalence rate for the whole body was 72% and, among body parts, the highest was 48.7% for the shoulder, followed by 34.6%(the low back), 32.7%(the leg/foot), 27.9%(the neck), 26.7%(the wrist) and 12%(the elbow). The symptoms were significantly different by job/occupational variable in each of all body parts except the neck. The symptoms were very significantly different by task/activity variables in each of all body parts while those symptoms were significantly different by psychosocial variables, depending on body part and gender. In the logistic regression analyses performed for MSD symptoms by body part and each of 3 factors, odds ratio values varied, ranging from 0.7 to 3.3. The controls for reducing the symptoms were discussed on the basis of the findings. The results show that the MSD symptoms can remarkably vary by the factors and, in particular, can be highly differential for the task/activity factor. This study suggests that MSD symptom features be examined by using various factors and then a higher differential factor be primarily utilized for controling MSD symptoms in general industry including hospital settings.

• Journal of Acupuncture Research
• /
• v.27 no.1
• /
• pp.21-29
• /
• 2010

Objectives : This study aims to evaluate current clinical evidence of acupuncture treatment for rehabilitation in patients with traffic accident in South Korea. Methods : Seven Korean databases were searched for prospective clinical trials for acupuncture on rehabilitation in patients with traffic accident from their inception to June, 2009. Only studies conducted in Korean language were searched. Risk of bias in included randomized controlled trials were assessed by Cochrane Handbook procedure. Results : Fifteen clinical trials were included among 31 studies searched. Eight were observational studies, five were non-randomizedcontrolled trials, and two were randomized controlled trials. In all of included studies, acupuncture were conducted with other concomitant treatment. Included studies dealt with such conditions as neck pain, low back pain tinnitus after traffic accident, post-traumatic stress, oculomotor nerve palsy, diplopia and insomnia. All of included studies reported favorable effects of acupuncture group compared to baseline or control group. All of included studies lacked the occurrence of adverse events. High risk of bias were observed in two randomized controlled trials. Conclusions : There is no evidence that acupuncture is effective for rehabilitation of traffic accident. All of included studies lacked appropriate methodological qualities and internal validity. Future welldesigned clinical trials that evaluate the effects and safety of acupuncture treatment for rehabilitation in patients with traffic accident is needed.

• Research in Community and Public Health Nursing
• /
• v.18 no.4
• /
• pp.662-672
• /
• 2007

Purpose: In recent years, the problem of runaway youths, which is rapidly increasing and worsening in nature, has emerged as a serious problem to individuals, home and the society as a whole. Against this back drop, this study was designed to illuminate the danger signals through extensive analysis of factors influencing the running away of middle-school students and, on this basis, build a forecast model on runaway middle-school students. Method: The subjects of this descriptive survey on the causal relation were 592 subjects enrolled in middle schools selected through convenience sampling. The data collected from June 19 to July 19, 2003 were analysed through the SPSS 10.0 program. The differences between the runaway group and the non-runaway group were determined through chi-square and t-test. Also logistic regression analysis was conducted on the basis of the purposeful selection method for constructing the forecast model. Result: The findings are as follows: Individual-related factors predicting runaway middle-school students were smoking experience, delinquent experience, psychosomatic symptoms and stress. A home-related factor was attachment to family. A society-related factor was the number of delinquency friends. Conclusion: The findings of this study suggest that a broad intervention program should be provided to middle-school students' culture related to runaway group. It is also recommended that a variety of individual, home and society-related programs should be developed for the runaway group.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.2
• /
• pp.173-179
• /
• 2018

Estimating reliability of a non-repairable system using the degradation data, variance assumption such as homogeneity (constant) or heteroscedasticity (time-variant) could affect accuracy of reliability estimation. This paper showed reliability estimation and comparison results under normal conditions using accelerated degradation data obtained from destructive measurements, according to variance assumption of the data at each measurement time. Degradation data from three accelerated conditions with stress factors of temperature and humidity were used to estimate reliability. The $B_{10}$ lifetime was estimated as 1243.8 years by constant variance assumption, and 18.9 years by time-variant variance. And variance assumption provided different analysis results of important stresses to reliability. Thus, accurate assumption of variance at each measurement time is required when estimating reliability using degradation data of a non-repairable system.