• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.740-745
• /
• 2001

The plastic deformation behavior of formed CICC fur the superconducting Tokamac fusion device was examined and appropriate manufacturing information was provided. A relation between travel of the bending roller and spring back displacement was obtained via virtual manufacturing. The radius of CICC after forming was expressed as a function of the bend-roll travel. The maximum von Mises stress after spring back was also monitored fur the SAGBO prediction. Next, the variation of the CICC cross-sectional area was examined during the first turn and during conduit bending with the largest curvature. Finally, the coil radius was measured and compared with the data generated from the virtual manufacturing. The measured data showed similar pattern as predicted one. Using the mapping function found to match with the real data, the data from the virtual manufacturing may facilitate accurate manufacturing.

• Transactions of Materials Processing
• /
• v.20 no.6
• /
• pp.456-460
• /
• 2011

A major source of difficulty in die design for high strength steel is the high level of elastic recovery during unloading. The degree of elastic recovery is affected by factors such as material strength, bending angle, punch's corner radius and sheet thickness. Finite Element Method was used in the present work to quantitatively analyze the elastic recovery for various combinations of these parameters. In some cases elastic recovery happened in reverse direction. This phenomenon, which we call spring-go, was explained via changes in stress distribution in the panel occurring in the forming process.

• The Korean Journal of Pain
• /
• v.2 no.1
• /
• pp.78-84
• /
• 1989

Steroid and local anesthetics were injected into the epidural space through the posterior sacral foramen or lumbar approach in 4 patients for the purposes of relieving severe low back pain and radiculopathy. These patients were referred from other sections dealing with low back pain and radiculopathy, because one could not tolerate the surgical stress due to a heart problem, another two did not want the operation and the last had post-laminectomy status. All patients were satisfied with the results subjectively.

• Journal of Acupuncture Research
• /
• v.21 no.4
• /
• pp.53-64
• /
• 2004

Objective: This study was to evaluate the influence of stress on Peripheral Facial Paralysis during the complex traditional korean medical treatment. Methods: We investigated 41 cases of patients with Peripheral Facial Paralysis who were given the complex traditional korean medical treatment. one group had stress as main factor, the other group didn't it. we evaluated the treatment effect of each group by using Gross Grading System of House-Brackmann, Yanagihara's Unweighed Grading System. Results : 1. In age, sex, lesion, duration of disease, frequency of treatment, duration of treatment, we found that two groups have no significant differences. 2. Pain back of the ear showed the highest frequency in symptoms at onset. 3. Boyangwhanotang showed the highest frequency in oriental herb medicine treatment. 4. As a result of evaluation by using Gross Grading System of House-Brackmann, Yanagihara's Unweighed Grading System, treatment score after 2weeks was marked more higher than score before treatment and treatment score after final treatment was more higher than treatment score after 2weeks on each groups. 5. After final treatment, Non-stress group had signficant result on Gross Grading System of House-Brackmann, Yanagihara's Unweighed Grading System compared with stress group. Conclusion : These results suggested that patient with Non-stress group should be get better than stress group.

• Journal of the Korean Society of Safety
• /
• v.20 no.3 s.71
• /
• pp.202-211
• /
• 2005

Musculoskeletal Disorders(MSDs) have been a growing problems with higher incidence rate every year. The 65% of all work-related diseases in the US has been MSDs since the middle of the 90s according to BLS(Bureau of Labor Statistics, 1995). The MSDs in Korea has been increased in recent 10 years as well. This study has tried to focus on job stress associated with MSDs that has not been usually studied before. Specifically job stress of workers at automobile manufacturing industry and relationship between job stress and symptoms of MSDs have been major concerns in this study. The workers had higher stress with longer working experience, longer working hours, and worse working environment. The job stress had strong association with the symptoms at hand, wrist and low back. Specifically, job stress factors such as job requirement and job future ambiguity had more effects on the symptoms of MSDs.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1990-2001
• /
• 1991

The fatigue life and crack penetration behavior of high strength steel have been studied in detail both experimentally and analytically. The fatigue crack shape of a smooth specimen is almost semicircular, while a specimen with stress concentration becomes semielliptical according to stress concentration shape. The aspect ratio of smooth specimens calculated using the Newman-Raju's formular is smaller than the value obtained from the experiment. On the other hand, the aspect ratio of the stress concentration specimen shows a good agreement with experimental results. It is found that the crack growth behavior on the back surface after the penetration is unique and can be divided into three stages ; rapid growth region, constant growth region and acceleration growth region. By using the K value suggested in this study, the particular crack growth behavior and crack shape can be estimated quantitatively.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.436-444
• /
• 1991

A computational method has been developed to analyze the bone-remodeling induced by external fixator. The method was based on the Finite Element Method (FEM) in combination with numerical formulation of adaptive bone-remodeling theories. As a feed-back control variable, compressive strain and effective stress were used to determine the surface remodeling and internal (density) remodeling respectively. Surface remodeling and internal remodeling were combined at each time step to predict the rel situation. A noticeable shape and density change were detected at the region between two pins and density change was decreased with time increment. At final time step, the shape and density distribution were converged closely to its original intact bone model. Similar change was detected in stress distribution. The altered stress distribution due to the pin and external fixator converged to the intact stress distribution with time.

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.155-158
• /
• 2013

FeCoB films were being prepared on a Ru underlayer by using the oblique incidence of sputtered and back-scattered particles which have a high in-plane magnetic anisotropy field $H_k$ above 400 Oe. It is suitable to attain such deposition condition when facing targets sputtering system. The in-plane X-ray diffraction analysis clarified that there is anisotropic residual stress which is the origin of the high in-plane magnetic anisotropy. The directional crystalline alignment and inclination of crystallite growth were also observed. Such anisotropic crystalline structures may affect the anisotropic residual stress in the films. The B content of 5.6 at.% was appropriate to induce such anisotropic residual stress and $H_k$ of 410 Oe in this experiment. The film with B content of 6 at.% possessed large saturation magnetization of 22 kG and high $H_k$ of 500 Oe. The film exhibited high ferromagnetic resonance frequency of 9.2 GHz.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1887-1889
• /
• 2005

To measure the mechanical and structural properties of semiconducting materials in power cable, we have investigated the stress-strain and fractural structure of semiconducting materials showed by changing the content of carbon black. Those were made as sheets after pressing for 20 minutes at $180[^{\circ}C]$ with a pressure of $200[kg/cm^2]$. The contents of conductive carbon black were 20, 30 and 40(wt%), respectively. The stress-strain experiment was measured by TENSOMETER 2000. The SEM experiment was measured by JSM-6400. From above experimental result, Strain was decreased, while stress was increased according to increment of carbon black content. EEA among resins was best the dispersion of carbon back in base resin from SEM measurement.

• Korean Journal of Occupational Health Nursing
• /
• v.8 no.2
• /
• pp.162-168
• /
• 1999

To investigate industrial fatigue and low back pain, the questionaire survey for subjective symptoms of fatigue and low back pain was carried out 305 nurses in general hospital in Korea. Nurses participated to this study were divided into low back pain group(LBP) and control group, according to the self-reports by written questionaires. The subjective sysptoms of fatigue comprised three groups of 10 items each, representing dullness and sleepiness(level of cerebral activation), difficulty in concentration(level of motivation) and bodily projection of fatigue. The resultant data were processed for $x^2$-test, t-test to confirm the associations. The results were as follows: 1. 28 items of fatigue subjective symptoms exept two item, 'feel thirsty and 'feel ill', were directly associated with low back pain. 2. The percentage of fatigue complaint were significantly higher in LBP group than control. 3. Of the 30 items of fatigue subjective symptoms, the highest percentage was accounted for 'legs feel heavy', 'eye strain', 'feel stiffness in the neck or the shoulders' followed by 'feel like lying', 'whole body feels tired', 'feel a pain in the low back', 'feel drowsy' and in the order of sequence. 4. The average weighted score for the first group of fatigue items(dullness and sleepiness) was the largest among three groups and was followed by the second group(difficulty in concentration) and the third group (bodily projection of fatigue) in the order of sequence, suggesting the heavier mental and shift work stress of the female workers.