• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.12
• /
• pp.1818-1823
• /
• 2015

In this paper, we analyzed the optimal configuration of protection wire that have been installed in the electric railway power supply system. Protection wires are to suppress the ground potential rise when the short circuit fault between contact wire-rail(C-F), and protect the electronics equipments(signalling and communication) that are facility the wayside. The role of protection wires must be feed back quickly the fault current to the substation when a short circuit fault occurs. In this paper, we proposed that only one line to install the protection wire. Comparing how to newly proposed and existing system, most of the performance is similar. The reason is that most of the current flowing in the protection wire near the location where the fault occurred. There is no problem even if in one line for human safe and the low impedance of the return circuit in dimension to ensure the safety of the facility during the fault. To ensure safety during an fault occurs, it is sufficient even by one line. But, In the protection wire of facilities planning it is necessary to design taking into account the potential utility.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.300-300
• /
• 2010

후면 패시베이션, back contact의 가변, 후면 접촉면적의 가변 등으로 Laser Fired Contact 태양전지의 효율을 증가 시킬 수 있다. 이 중 spacing의 가변으로 후면 접촉 면적을 가변 할 수 있으며, 이로 인하여 LFC 태양 전지의 효율을 높일 수 있을 것으로 전망된다. 본 연구에서는 후면 접촉 면적을 가변하였으며 이에 따른 효과를 확인하였다. series resistance가 작고, open circuit voltage 가 높은 최적의 조건을 찾는 것에 그 목적을 두었다. 실험 순서는 texturing 후, 후면에 SiNx를 10nm 증착하였으며, drive-in 방법으로 $POCl_3$을 도핑하였다. ARC후, spacing 조건 가변으로 접촉 면적을 가변시키면서 소자의 특성 변화를 비교하였다. 접촉 면적 및 spacing 조건은 5개의 set에 대하여 reference, 50%의 접촉 면적을 가지는 $150{\mu}m$ line, 10%의 접촉 면적을 가지는 $700{\mu}m$ line, 1%의 접촉 면적을 가지는 $700{\mu}m$ dot, 그리고 0.2%의 접촉 면적을 가지는 $1500{\mu}m$ dot으로 하였다. 각각의 경우에 대한 short circuit current density, fill factor, seris resistance, sheet resistance, open circuit voltage를 측정하였으며, 특히 series resistance는 각각의 경우에 대하여 $6.1m{\Omega}$, $5.1m{\Omega}$, $7.8m{\Omega}$, $10.1m{\Omega}$, 그리고 $15.7m{\Omega}$으로 측정되었다. wafer의 외각 테두리를 접촉 면적이 증가함에 따라서 sheet resistance가 증가하는 것을 확인 할 수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.369-374
• /
• 2004

This study aims to measure an apparent mass of a seated human body at the sitting posture in a passenger car in the frequency range from 1 to 20 Hz and to investigate the dynamic characteristics. Thirty subjects joined the test where eight levels of acceleration from $0.1m/s^2\;to\;2.0m/s^2$ were used to excite seated human body. Most of apparent mass curves showed two peaks in the frequency range of $4\sim9Hz$, first peak was clearer at the contact point of the seat and the hip, and the second one at the contact point of the backrest and the back. Both peak frequencies were found to move down to lower frequencies with increase of acceleration magnitude. Shapes of apparent mass curves were clearly different from those at erect posture especially in the frequency range around and above the second peak.

• Journal of the Optical Society of Korea
• /
• v.17 no.4
• /
• pp.323-327
• /
• 2013

A laser ultrasonic inspection system has the advantage of nondestructive testing. It is a non-contact mode using a laser interferometer to measure the vertical displacement of the surface of a material caused by the propagation of ultrasonic signals with the remote ultrasonic generated by laser. After raising the ultrasonic signal with a broadband frequency range using a pulsed laser beam, the laser beam is focused to a small point to measure the ultrasonic signal because it provides an excellent measurement resolution. In this paper, foreign materials are measured by a non-destructive and non-contact method using the laser ultrasonic inspection system. Mixed foreign material on the corroded part is assumed and the laser ultrasonic experiment is conducted. An ultrasonic wave is generated by pulse laser from the back of the specimen and an ultrasonic signal is acquired from the same location of the front side using continuous wave laser and Confocal Fabry-Perot Interferometer (CFPI). The characteristic of the ultrasonic signal of existing foreign material is analyzed and the location and size of foreign material is measured.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.36 no.1
• /
• pp.23-27
• /
• 2022

This study aims to evaluate the anti-inflammatory effect of 80% ethanol extracts of Stachys affinis (MQ) on 1-fluoro-2,4-Dinitrofluorobenzene (DNFB) induced atopic dermatitis (AD) in Balb/c mice. AD-like allergic contact dermatitis was induced by challenge of DNFB on the ear after DNFB sensitization on the back sides of mice. MQ alleivated clinical severity in AD-like skin lesions. In addition, ear thickness of epidermis and penetration of inflammatory cells in AD-like skin lesions were decreased by topical application of MQ. The the serum levels of tumor necrosis factor-α (TNF-α) and interleukin-4 (IL-4) were measured in AD mice using ELISA kits. Levels of TNF-α and IL-4 in serum were significantly decreased by topical application of MQ. Therefore, this study could give a clinical basis that MQ could be a agent to prevent AD.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.4 no.1
• /
• pp.26-31
• /
• 2008

Cerebrovascular Accident(stroke) is that a sudden, nonconvulsive loss of neurologic function due to an ischemic or hemorrhagic intracranial vascular event. If stroke happens at the portion of trigeminal motor nucleus or its control part of cerebral cortex, masticatory muscles will be atrophy or paralyzed. So it is possible that dental occlusion changes after stroke. A 74-aged woman recurred mild stroke 2 month ago, who had experienced severe stroke 2 years ago. After recurrence, suddenly her upper full denture was dropped when lower denture contacted upper one. According to the her occlusion exam, her lower jaw moved back slightly compared with the occlusion of old denture. And her face had asymmetry and lower jaw dislocated to paralyzed side. A 50-aged man was treated because many cervical caries, which would occur because of an aftereffect of stroke, long-herm hospitalization and limits of self oral-care. 6 years ago he had cerebral hemorrhage and he claimed that he cannot bite exactly. Just two pairs of teeth was contact on biting, his lower jaw was located back, too. This two case suggests that dental occlusion can change after stroke.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.139-145
• /
• 1996

The machining accuracy and performance is largely influenced by the static, dynamic and thermal characteristics of spindle systems in machine tools, because the spindle system is a intermedium for cutting force from tool and machine powef from motor. Large cutting force and power are transmitted by bearing with a point or line contact. So, the spindle system is the static and dynamic weakest point in machine structure. For improvement of static stiffness of spindle system can be changed design parameters, such as diameter of spindle, stiffness of bearing and bearing span. But for dynamic stiffness, the change of the design parameters are not useful. In this paper, the combined bearing arrangement is suggested for high damping spindle system. The combined bearing arrangement is composed of tandem double back to back arrangement type ball bearins and a high damping hydrostatic bearing. The variation of static deflection and amplitude in first natural frequency is evaluated with the location of hydrostatic bearing between front and rear ball bearing. The optimized location of hydrostatic bearing for high static and dynamic stiffness is determined rapidly and exactly using the mode shape and transfer function of spindle. The calculation of damping effect on vibration by unbalance of grinding wheel and pulley in optimized spindle system is carried out to verify the validity of the combined bearing arrangement. Finally, the simulation of grinding process show that the surface roughness of workpiece with high damping spindle system is 60% better than with ball bearing spindle system.

• Journal of the Speleological Society of Korea
• /
• no.70
• /
• pp.29-35
• /
• 2006

21 century as the knowledge base society which demands an originality and a variety the updated technology and knowledge creation ability quality and national power of life of the citizen were under controlling. Consequently, the extension of development and originality of the ability which is various leads and studying voluntary character and the ability back the education which it considers actively it raises and the infield it does. With activation plan of cave resources home page of Speleological Society of Korean like home page of Speleological Society of Japan cave crane information, caving information, cave Q/A, cave publication, the relation site back the possibility of seeing information regarding the cave which is various in order to be, it reorganizes. The possibility of coming in contact in order to be, various branch information also the general rain specialist regarding the cave resources. Currently the possibility of seeing the various branch data for the application of the cave resources at any time it is, home page of Speleological Society of Korean the possibility of doing to lead in order to be, it proposes the plan. From one person it will be able to study the data regarding the cave of various field in order, all curricular materials regarding the cave resources the educational program which leads a home page about under developing it proposes the activation plan of the cave resources.

• Journal of Surface Science and Engineering
• /
• v.44 no.6
• /
• pp.264-268
• /
• 2011

The Molybedenium thin film is generally used on back contact material of CIGS solar cell due to low electrical resistivity and stable thermal expansion coefficient. The Mo thin films deposited on si wafer by the magnetron sputtering method. The research focused on the variation of electrical resistivity of films which deposited with various working pressure at the target power of 2.0 kW(8.4 W/). The lowest resistivity of Mo thin film showed $9.0{\mu}O$-cm at pressure of 1.5 mTorr. However, working pressure increasing up to 50 mTorr, resistivities were highly increased. The results showed that the conductivity of Mo films depended on growing structures and defects in deposition process. Surface morphology, porosity, grain size, oxidation, and bonding structures were analysed by SEM, AFM, spectroscopic ellipsometry (SE), XRD, and XPS.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.23-23
• /
• 2009

우수한 용접부 품질 때문에 TIG를 이용한 오비탈 용접은 파이프 용접에 널리 사용되고 있다. 하지만 루트갭이 없고 루트페이스가 큰 맞대기 오비탈 용접의 위보기 및 경사상진자세에서는 오목한 이면비드가 형성되기 쉽지만, 이러한 문제를 극복하기 위한 연구는 희박한 실정이다. 본 연구에서는 위보기 및 경사상진자세에서 볼록한 이면비드의 형성을 연구하기위해서 용융지의 제어 방법을 적극적으로 검토하였다. 4mm 두께의 SS400 시편을 위보기 및 경사상진자세에서 각각 Bead-on-plate 용접하고, 이 때 비드성형기의 사용에 따른 비드 형상 변화를 관찰하였다. 텅스텐 전극과 비드 성형기간의 거리(Tip To Former Distance, 이하 TTFD)를 4.5mm에서 7.5mm로 1mm단위로 변경시켜 실험하였으며, TTFD가 증가할수록 위보기 및 경사상진자세에서 이면비드 높이가 감소하였으며 표면비드의 처짐이 증가하였다.