• 재활복지
• /
• v.22 no.4
• /
• pp.1-22
• /
• 2018

We aimed to analyze the effects of Kinesio-Taping on pain, satisfaction, and gait, and to provide basic data on the self-application of this method. The participants were 30 adult women with chronic low back pain. Kinesio-Taping was applied for 2 weeks, followed by 4 weeks of self-application education and self-application. The participants' pain levels were analyzed using the visual analog scale, satisfaction was analyzed using the Canadian Occupational Performance Measure, and gait was analyzed in terms of stride length, step length, step width, and gait time using the Walkway MG-1000 gait analyzer. The results of the pain showed the statistically significant decrease steadily (p<0.001) and the results of the satisfaction showed the statistically significant increase steadily (p<0.001) from the application of the Kinesio-Taping. Also, according to the In-Object verification between pre-test, taping application (after 2 weeks) and Self-application (after 4 weeks), the results of the satisfaction showed statistically significant difference (p<0.001). According to the gait analysis, the results of the stride length and step length showed the statistically significant increase steadily (p<0.001) and the results of the step width and gait time showed the statistically significant decrease steadily (p<0.001) from the application of the Kinesio-Taping. Also, according to the In-Object verification between pre-test, taping application (after 2 weeks) and Self-application (after 4 weeks), the results of the step width showed statistically significant difference (p<0.001). Thus, the self-application education about the Kinesio-Taping should be considered to reduce the pain and improve the performance level of the activities of daily life through the improvement of the self-management ability and to induce the active participation in the self-management activities and increase the satisfaction.

• Journal of the Korean Chemical Society
• /
• v.65 no.2
• /
• pp.151-165
• /
• 2021

The study applied chemistry classes based on Collaborative Problem-Solving for Competency(CoProC) Instruction Model to 86 high school seniors and recognized the resulting changes in Character Competence through character competence test, analysis of argumentation, and analysis of reflective writing. In addition, the analysis of the correlation between the assessment results showed what each evaluation method meant to assess Character Competence. The study found that the average score of Character Competence rose in all three assessments, but differences were found in the detailed factors. Character competency test is meaningful in helping students participate with a sense of mastery of learning as a self-evaluation, and the analysis of the argumentation process seems to be an appropriate evaluation method to evaluate the Character Competence shown by students' words and actions through course evaluations. An analysis of reflective writing showed the advantage of being able to analyze Character competencies that are difficult to show in action by looking back on the entire course of learning. In addition, given that the correlation between the three assessment results is very low, it is expected that the three Character competency assessment methods will be conducted together to obtain detailed and comprehensive information on students' character competencies.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.1
• /
• pp.39-53
• /
• 2019

Bi-directional pile load test (briefly called 'BDH PLT') cannot be performed at loading levels where ultimate bearing capacity could be assessed in field, it is not possible to precisely determine both ultimate load and yield load and under loading. Since the load is transmitted separately to the skin and the end unlike the static pile load test (briefly called 'SPLT') and the direction of loading on the skin is opposite, such methods could have a result different from actual movements of shafts. In this study, three-dimensional finite element method (briefly called '3D FEM') analysis was conducted from results of the BDH PLT, made with barret piles, which were large-diameter cast-in-place concrete piles, and the calculated design constants were applied to the 3D FEM analysis of the SPLT to interpret them numerically and then, actual behaviors of cast-in-place concrete piles were estimated. First, using the results of the BDH PLT with cast-in-place concrete piles, behaviors of the piles made by loading upwards and downwards were analyzed to calculate load-displacement. Second, the design constants, calculated by the 3D FEM analysis and the back analysis, were applied on the 3D FEM analysis for the SPLT, and from these results, behaviors of the SPLT through the BDH PLT was analyzed. Last, the results of the 3D FEM analysis of the SPLT through the BDH PLT was expressed in relationships as {A ratio of bearing capacity of the SPLT and of the BDH PLT (y)} ~ {A ratio of reference displacement and pile circumference (x)}, and they were all classified by reference displacement at 10.0 mm, 15.0 mm, and 25.4 mm.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.4
• /
• pp.267-279
• /
• 2014

Objective: The objective of this study was to define the Dynamic Sitting (DS) through trend analysis and research on the Dynamic Chair (DC) and applied technologies. Background: The effects of changing posture on the human body have been studied to find out healthy sitting postures. It is believed that changing posture is effective in reducing disc pressure on spinal cord and preventing back pain and musculoskeletal disease. But, the definition of DS and trends of DC have not been researched yet. Therefore, trend analysis of DC and its applied technologies are required to define dynamic sitting posture. Method: We researched the type of occupant postures from previous studies. And then, sitting behaviors were classified into three types; (1) sitting and standing, (2) working and studying, (3) taking a rest. Results: Variety shapes of DC and applied technologies were found out. From the result, the trend of DC and applied technology were summarized from three perspectives. ; (1) changing the chair functions according to user's intention, (2) conversion of dynamic chair technologies to office chair mechanism, (3) enables the user to change their sitting posture without operating control device. Conclusion: From this study, we defined dynamic sitting posture and analyzed the trend of DC and its applied technologies. This result might be used to develop an office chair for healthy sitting. But further investigation is required to figure out the technologies and functions for development of healthy chair. Application: The results of the publishing trend analysis might help to determine design concept of office chair.

• Fashion & Textile Research Journal
• /
• v.21 no.6
• /
• pp.789-799
• /
• 2019

This study classified and analyzed the upper body types of 7-13 years old elementary school boys, using 3D data from the 6th Size Korea. The results of this study are as follows. Seven factors were extracted from the factorial analysis as an independent factor for a cluster analysis. The cluster analysis generated four body types. Type 1 has large ratio of front and back depth as well as circumference, with a front protrusion. In Type 2, the vertical value of upper torso is longer than average; in addition, its flatness is the largest and produces a thin body type. Type 3 has a smaller flatness in the bust, waist, abdomen and hip than other types, while also having the largest BMI. Type 4 is characterized by a greater shoulder angle than other types and its other factors are close to average. As a result of the logistic regression analysis, the prediction model used eight variables to generate and its accuracy is 88.679%. The classification of upper body types from this study can be used as basic data to improve patternmaking for each body type. The generated prediction model is also expected to be used as a method to help classify upper body types using the eight variables.

• Food Science of Animal Resources
• /
• v.38 no.2
• /
• pp.362-375
• /
• 2018

This study proposed a rapid microscopic examination method for pork freshness evaluation by using the self-assembled hyperspectral microscopic imaging (HMI) system with the help of feature extraction algorithm and pattern recognition methods. Pork samples were stored for different days ranging from 0 to 5 days and the freshness of samples was divided into three levels which were determined by total volatile basic nitrogen (TVB-N) content. Meanwhile, hyperspectral microscopic images of samples were acquired by HMI system and processed by the following steps for the further analysis. Firstly, characteristic hyperspectral microscopic images were extracted by using principal component analysis (PCA) and then texture features were selected based on the gray level co-occurrence matrix (GLCM). Next, features data were reduced dimensionality by fisher discriminant analysis (FDA) for further building classification model. Finally, compared with linear discriminant analysis (LDA) model and support vector machine (SVM) model, good back propagation artificial neural network (BP-ANN) model obtained the best freshness classification with a 100 % accuracy rating based on the extracted data. The results confirm that the fabricated HMI system combined with multivariate algorithms has ability to evaluate the fresh degree of pork accurately in the microscopic level, which plays an important role in animal food quality control.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.131-139
• /
• 1993

The separation of gallium and indium from the matrix elements such as zinc and other ions, especially form Fe(III) ion was studied for the determination of trace level of them in zinc ores and zinc blendes by inductively coupled plasma atomic emission spectrometry(ICP-AES). Gallium and indium were extracted from the sample solution with a solvent of tributyl phosphate(TBP). The type and concentration of acid, interferences of other ions, the ratio of aqueous phase to organic phase, TBP concentration, sripping efficiency were optimized for the effective extraction. Gallium and indium were separated from other ions in the 5N hydrochloric acid solution of the samples by the extraction with 100% TBP. In this time, Fe(III) was reduced to Fe(II) with hydroxylamine hydrochloride to prevent its coextraction prior to the main extraxtion. After stripped from organic phase by the back-extraction with 0.02N HCl, they were determined in the aqueous phase by ICP-AES. This method was known to be quantitative from the overall extraction of more than 95%.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.5
• /
• pp.597-608
• /
• 2021

The control head components used in small military vessels are designed to be domestically produced, prototypes, structural analysis, and casting methods are designed and cast. The control head assembly consists of a lever, an aluminum outside cover, Middle, front gear cover, back gear cover, and a zinc worm gear. In order to reverse the design of each component, 3D scanning device was used, 3D modeling was performed by CATIA, and prototype productions were carried out by 3D printer. In order to reduce the cost of components, gating system is used by gravity casting method. The SRG ratio of 1:0.9:0.6 was set by applying non-pressurized gating system to aluminum parts, 1:2.2:2.0 and pressurized gating system to zinc parts, and the shapes of sprue, runner and gate were designed. The results of porosity were also confirmed by casting analysis in order to determine whether the appropriate gating system can be designed. The results showed that all parts started solidification after filling completely. ANSYS was used for structural analysis, and the results confirmed that all five components had a safety factor of 15 more. All castings are free of defects in appearance, and CT results show only very small porosity. ZnDC1 zinc alloy worm gear has a tensile strength of 285 MPa and an elongation of 8%. The tensile strength of the four components of A356 aluminum alloy is about 137-162 MPa and the elongation is 4.8-6.5%.

• Journal of Convergence Korean Medicine
• /
• v.4 no.1
• /
• pp.13-17
• /
• 2022

Objectives: Primary dysmenorrhea is a representative disease that causes intestinal pain, and it has long been known that acupuncture treatment is effective. In this study, a network analysis was conducted using acupuncture points reported in the existing systematic literature review, and the combination of acupuncture points used to treat primary dysmenorrhea was analyzed. Methods: Among of a total of 60 papers, excluding those that used ear acupuncture, the analysis results indicated that combinations of BL23, BL40, BL25, BL60, BL30, Ashi-points, BL26, GB34, and GV3 were used in combination. Results: Through this, it can be seen that previous studies to reveal the effectiveness of acupuncture on back pain mainly used the acupoints of the bladder meridian (BL), local acupoints group, and distal acupoints group. Conclusion: In order to reveal the correlation between acupoints and therapeutic effects through future studies and to provide guidelines on the principles of selecting and combining acupoints, it is necessary to employ a quantitative analysis method for therapeutic effects and to provide detailed reports on acupoints.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.607-616
• /
• 2002

This study analyzed the effects of pH, sex, backfat thickness, ribeye area, cold carcass weight, shipping month, muscle internal temperature, average daily temperature, and average relative humidity for slaughtered Hanwoo to meat color by season. The analyses focused on interaction and each effect to meat color of the factors. For the result for analysis of multiple linear regressions, meat color values were decreased as pH increased in all meat color, and the meat color values increased as the backfat thickness was increased. As the results of the decision tree analysis by each factor, cow and steer slaughtered in spring and autumn were the highest in the lightness(L*). The redness(a*) was the cases that pH was less than 5.63 and average relative humidity was over than 71.5% for Hanwoo slaughtered in autumn. The chroma(C*) value was the highest for Hanwoo that was slaughtered in summer and autumn, the pH was less than 5.60, and the back fat thickness was over than 8 mm. The hue angle($h^0$) was shown that the muscle internal temperature was less than 4.7$^{\circ}C$ among Hanwoo which was slaughtered in spring, summer, and autumn, the pH was less than 5.66, and the back fat thickness was over than 8 mm.