• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.931-939
• /
• 2013

In this paper, we try to find the lifting-line method which is applicable to the conceptual design of aircraft wings, and analyze the accuracy and coverage of the method. Two methods that are extended from the lifting-line theory of Prandtl are selected. One of the methods is Weissinger's method which imposes the velocity boundary condition at the control points located at the quarter chord, and the other is Phillips's method which combines the three-dimensional vortex lifting law. Calculations are performed for an elliptic wing, a swept back wing, and a tapered unswept wing with dihedral angle and geometric twist. The aerodynamic data of the potential flow such as spanwise distributions of circulation and downwash, lift and induced drag are obtained through calculations, and these data are compared with theoretical results and wind tunnel test data. As a result, Weissinger's method showed good accuracy and reliability regardless of wing shapes, but Phillips's method revealed inaccurate results for a swept back wing.

• Korean Journal of Social Welfare
• /
• v.64 no.1
• /
• pp.273-297
• /
• 2012

Using grounded theory method, this study analyzed the in-depth interviews with 11 parents of institutionalized children in order to find out how the experience of the parents on the process of the children's family reunification. According to the results, it was 'leaving one's child' that composed causal conditions, and also it was 'sentenced life' and 'adapting to a life without child' that composed existing conditions. Thus, the contextual condition was found out as 'a belief of family' and 'a belief of child caring' and the mediation conditions were 'power to recover' and 'not being as one's intentions'. Also, reaction/interaction strategies turned out as 'preparing a basis of child-care', 'playing a parent', 'standing against being adapted' and 'adjusting as their children back to family'. Finally, the analysis showed 'burdens on caring', 'wanting to leave one' child again', 'having stronger family membership' and 'being hopeful in a future' as results. The specific levels of the process were found out as following 4 steps, as time goes by. 1)Fostering children at institutions: become harsh parents(or a harsh parent), 2)After fostering: rebuild collapsed family in order to take the children back, 3)Family reunification: become aboveboard to oneself, family and the world, 4)After family reunification: try to keep the family taking precautions against resending. While taking their children back, the parents turned out to experience long, unremitting tension. Reflecting results of the analysis above, and in order to promote sending institutionalized children back to their families this article suggests practical alternatives for parents who left their children in institutions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.11
• /
• pp.1271-1284
• /
• 2011

This study improves the fitness of Air Force winter service uniforms through the development of a shirt pattern drafting method and automatic pattern drafting program for MTM production. A calculation formula is formed through a correlation analysis and regression analysis using Size Korea 2004 3D measurement data after analyzing 4 kinds of existing shirt pattern drafting methods and 3 types of shirt patterns currently used for the Air Force service uniform. The results of this study are as follows: The developed pattern drafting method has 4 parts that use calculated dimensions: neck base width, front interscye, back interscye and scye depth. Other body measuring parts that have a high correlation with calculation parts are inserted into regression analysis as independent variables to create dimension calculation formulas. The result of the final study patterns were better than existing winter service uniforms in nearly all items for the appearance evaluation and motion adaptability evaluations. The method was converted into an automatic pattern drafting program using C++ after the completion of pattern drafting method development.

• Journal of Aerospace System Engineering
• /
• v.12 no.1
• /
• pp.42-46
• /
• 2018

The subject of this study dealt with the structural safety analysis regarding the measured thrust test equipment as noted on a small engine. In this work, the structural design and analysis of steel and aluminum alloy structure for a small engine test of equipment were performed. Firstly, the structural design requirements of the engine test equipment were identified and investigated. After the structural design was reviewed, next the structural analysis of the engine test equipment was performed by the utilization of the finite element analysis method. The study was performed to determine that the stress and displacement analysis was appropriately managed regarding the applied load condition. As a result, it was determined that through the structural analysis, this study has confirmed that the designed engine test equipment is approved for safety, and meets its design purpose at this time.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.222-224
• /
• 2009

This paper proposes analysis data of generation efficiency with tracking method for solar tracking. Tracking algorithm of PV generation is divided the sensor method and program method. Generation efficiency is analyzed the three cases 1-high insolation, 2-low insolation, 3-rapidly changing insolation. Proposed data is possible to apply for development of novel algorithm with hybrid tracking method in this paper. Hereby, This paper is proved the benefit of analyzed data.

• Clinical Pain
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2020

Objective: A prospective, assessor-blinded, randomized controlled trial was conducted in patients with chronic low back pain to evaluate the efficacy of portable low power laser therapy (LPLT) and the effect when combined with exercise therapy on pain and functions. Method: 60 patients were recruited and 56 patients, excluding 4 dropouts, were randomly allocated to the LPLT group (Group 1: 19 patients), placebo laser therapy with exercise group (Group 2: 18 patients), and LPLT with exercise group (Group 3: 19 patients). Laser therapy and exercise was performed five times a week for 4 weeks. Visual analogue scale (VAS), Schober test, lumbar range of motion (ROM) measures (flexion, extension and lateral flexion), Oswestry Disability index (ODI) were measured at baseline, at 4 weeks after intervention, and at 6 weeks after 2 weeks of no intervention. Results: Statistically significant improvements were noted in all group by time interaction with respect to all outcome parameters (p<0.05). All parameters in each group improved not only in the period of treatment (4 weeks), but also in the final evaluation (6 weeks) 2 weeks after the end of treatment. Post-hoc analysis showed statistically significant difference between the LPLT with exercise group and the other groups in all outcome parameters except for the ODI at 4 weeks and at 6 weeks. Conclusion: Portable LPLT is effective treatment in reducing pain and improving lumbar ROM and with exercise is more effective than laser or exercise monotherapy for the chronic low back pain patients.

• Geotechnical Engineering
• /
• v.14 no.3
• /
• pp.25-46
• /
• 1998

This paper shows that there are the results of a series of model tests on the behavior of single pipe pile which is subjected to lateral load in, Nak-dong River sand. The purpose of the present paper is to estimate the effect of Non-homogeneity. constraint condition of pile head, lateral load velocity, relative density, and embedded length of pile on the behavior of single pile. These effects can be quantified only by the results of model tests. Also, these are compared with the results of the numerical methods (p-y method, modified Vlasov method; new ${\gamma}$ parameter, Characteristic Load Method'CLM). In this study, a new ${\gamma}$ parameter equation based on the Vlasov method was developed to calculate the modulus of subgrade reaction (E. : nhz.) proportional to the depth. The p-y method of analysis is characterized by nonlinear behavior. and is an effective method of designing deep foundations subjected to lateral loads. The new method, which is called the characteristic load method (CLM). is simpler than p-y analysis. but its results closely approximates p-y analysis results. The method uses dimensional analysis to characterize the nonlinear behavior of laterally loaded piles with respect to be relationships among dimensionless variables. The modulus of subgrade reaction used in p-y analysis and modified Vlasov method obtained from back analysis using direct shear test (DST) results. The coefficients obtained from DST and the modified ones used for the prediction of lateral behavior of ultimate soil reaction range from 0.014 to 0.05. and from 0.2 to 0.4 respectively. It is shown that the predicted numerical results by the new method (CLM), p-y analysis, and modified Vlasov method (new parameter) agree well with measured results as the relative density increases. Also, the characteristic load method established applicability on the Q-Mnu. relationship below y/D=0.2.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.90-96
• /
• 2016

Incremental sheet forming (ISF) is a highly versatile and flexible process for rapid manufacturing of complex sheet metal parts. Compared to conventional sheet forming processes, ISF is of a clear advantage in manufacturing small batch or customized parts. ISF needs die-less machine alone, while conventional sheet forming requires highly expensive facilities like dies, molds, and presses. This equipment takes long time to get preparation for manufacturing. However, ISF does not need the full facilities nor much cost and time. Because of the facts, ISF is continuously being used for small batch or prototyping manufacturing in current industries. However, spring-back induced in the process of incremental forming becomes a critical drawback on precision manufacturing. Since sheet metal, being a raw material for ISF, has property to resilience, spring-back would come in the case. It is the research objective to investigate how geometrical shaping parameters make effect on shape dimensional errors. In order to analyze the spring-back occurred in the process, this study experimented on Al 1015 material in the ISF. The statistical tool employed experimental design with factors. The table of orthogonal arrays of $L_8(2^7)$ are used to design the experiments and ANOVA method are employed to statistically analyze the collected data. The results of the analysis from this study shows that the type of shape and the slope of bottom are the significant, whereas the shape size, the shape height, and the side angle are not significant factors on dimensional errors. More error incurred on the pyramid than on the circular type in the experiments. The sloped bottom showed higher errors than the flat one.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.3 no.2
• /
• pp.53-60
• /
• 2008

Objectives : The aim of this study is to compare the improvement of Low back pain (LBP) depending on female inpatient's Bone mineral density (BMD) after menopause. Method : We evaluated 10 cases of normal and 25 cases of osteopenia and osteoporosis based on Bone mineral density test among the female inpatients with LBP who were after menopause, admitted at Jaseng Hospital of Oriental Medicine from January 2008 to August 2008. Result : Depending on the analysis of pathogenic cause, most were without specific reason and except that, overwork and lifting heavy weight were the most common reason. Using improvement-analysis based on treating period, the normal group showed higher decrease of Numerical Rating Scale (NRS) than osteopenia and osteoporosis group. Conclusion : Statically, among the female inpatients with LBP, who were after menopause, had no significant differences between the normal group and osteopenia and osteoporosis group's improvement rate, depending on treating period.

• Journal of the Korean Home Economics Association
• /
• v.30 no.3
• /
• pp.15-32
• /
• 1992

The purpose of this study was to detect the effect of the lower body type on the shape of flare skirts. The subjects for the wearing test were 50 female students, who were controlled in their hip and waist shapes. The skirts used for wearing test were six types(three flar angles $\times$ two fabric types). The effect of lower body type on the shape of flare skirts was determind by the hemline trace method and the silhouette photography. The data were then analyzed by the repeated measures of analysis of variance and the SNK multiple range test. The results obtained from this study were as follows : 1) When a flare skirt made with larger flare angle and better drapable fabric was worn, the numeric of the nodes increased as the drop value(hip - waist) increased. When a flare skirt made with smaller flare angle was worn, the width of horizontal sectio of hemline increased as the drop value increased. The hemline uneveness decreased on the sides and back as the drop value increased. When a flare skirt made with worse drapable fabric was worn, the sides angle of the flarskirt increased as the drop value increased. 2) When a flare skirt made with larger flare angle was worn, the numeric of nodes increased as the ratio of dropped hip increased. The wave-height increased and the back variation ratio of wave-height was higher than the front variation ratio of wave-height as the ratio of dropped hip increased. The hemiline uneveness decreased on the back as the ratio of dropped hip increased. When a flare skirt made with larger flare angle was worn, the sides angle of the flare skirt increased as the ratio of dropped hip increased.