• Journal of the Semiconductor & Display Technology
• /
• v.23 no.3
• /
• pp.96-101
• /
• 2024

In this study, we report on the joining of mullite ceramics using the reaction-bonded aluminum oxide method without applying any external pressure, in consideration of a possible multilayer ceramic substrate in semiconductor back-end process. For this purpose, Al/Al2O3/SiO2/Mullite powder mixture paste was applied to the joining surfaces between two parent mullite bodies of the same composition, and then sintered at 1,650 ℃ for 2 h in air, resulting in a dense and rigid mullite ceramic joints. Phase and microstructural analysis of the joined mullites showed that the reaction bonding by Al oxidation and thereafter mullite formation were completed during the heat treatment process. However, due to the difference in sintering behavior between the parent body and the joining layer, few pore of which size proportional to the joining layer thickness, were observed at some parts of the joining interface. The formation of the pore and its causes was discussed.

• Journal of the Korean Home Economics Association
• /
• v.25 no.3
• /
• pp.15-26
• /
• 1987

The purpose of this study was to develop the pattern drafting method which would be suitable to their physical characteristics for the fatty body of 40∼55 aged Korean women who are more than 1.5 Rohrer's Index and 90㎝ bust girth. The study was composed as follows; 1. Body measurement and statistical analysis: One hundred and thirty women were measured on 29 items. Thirty-four items including 29 measured items and 5 calcutated items were analyzed statistically. 1) Mean, standard deviation, variance, maximum, minimum, range were computed. 2) Correlation coefficients between each items were computed. 2. Development of new bodice pattern drafting method: Measurement items necessary to draft new bodice pattern were bust girth, center back waist length, shoulder width, back width, chest and neck base girth. The new pattern was examined through three wearing tests for completion. 3. Evaluation of the new pattern drafting method: The new pattern was objectively evaluated by the sensory test. The sensory evaluation was applied to evaluate the new pattern for the fatty body women by comparint it with the conventional patterns. The results of sensory tests of the new pattern are as follows: 1) The composite reliability coefficient is 0.7698, and the reliability of sensory test shows high. 2) According to a statistical analysis of the result of the 23 items on the questionaire, all the items showed significant differences(α 0.01) between the two, with the new pattern having higher scores. The new pattern is better conventional pattern as the average mark of the former is 3.901 but that of latter is 2.926. The new pattern drafting method proved to be superior to the conventional one especially in the fitness at the center front neck point, shoulder point, side line, armscye depth, position of bust point, chest width line, under arm dart and the shoulder line.

• Fashion & Textile Research Journal
• /
• v.13 no.5
• /
• pp.661-671
• /
• 2011

This study was designed to produce rounded belt pattern and tight-skirt pattern drafting method using 3D body scan data. Subjects were thirty women in their early twenties. In order to figure out the optimum cutting points, namely, where darts are made, using CAD program, curve ratio inflection points on the horizontal curve of waist, abdomen, and hip to find 1 point in the front, two points in the back part. The average length from center front point to maximum curve ratio was 7.7 cm(46.3%) on the waist curve; 7.9 cm(39.4%) on the abdomen curve. And the average length from center back point to maximum curve ratio point was 6.9 cm(39.0%) for first dart and 11.2 cm(63.3%) for second dart on the waist curve; 8.9 cm(35.8%) for first dart and 15.7 cm(63.3%) for second dart on the hip curve respectively. The cutting lines from were made up by connecting curve inflection points. After divided using cutting lines, each patch was flattened onto the plane and all the technical design factors related with patternmaking were measured, such as dart amount, lifting amount of side waist point, etc. Based on the results of correlation analysis among these factors, regression analysis was done to produce equations to estimate the variables necessary to draw up pattern draft method; F1=F8+1.1, $F4=2.5{\times}F2+0.9$, $F5=0.9{\times}F4+1.0$, $F6=0.3{\times}F4+0.4$, $B1=0.9{\times}B8+2.3$, $B4=2.1{\times}B2+1.3$, $B5=0.9{\times}B4+3.5$, and $B6=0.3{\times}B4+0.4$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.5 no.2
• /
• pp.21-33
• /
• 1981

The purpose of this study was to develop a skirt pattern drafting method for korean women between the ages of $18\~24$ on the basis of their physical charcteristics which differs from those of other races in its size and figure. The study procedures and results were as follows; 1. Ten types of convantional skirt patterns were collected and compared to determine the essential measuring items for skirt construction, and to discover what problems are involved. 2. Fourteen items of KIST measurement data were analysed for correlation coefficients, to establish representative items and independent ones. 3. Front waist length and back waist length were additionally measured for supplementary data. 4. A new skirt drafting method was developed based on the results of the pattern comparison and the data analysis. 5. A sensory evaluation was applied to evaluate the new method comparing it with the most widely accepted conventional pattern. An original rating scale was developed for the evaluation and an expert panel consisting of five members judged each shell from 12 subjects by random selection. According to a statistical analysis of the result of the 17 items on the rating scale, 14 items showed significant differences (${\alpha}\leqq$0.01 or ${\alpha}\leqq$0.05) between the two, with the new pattern having better fit. The new pattern drafting method proved to be superior to the conventional one especially in the fitness at the back hip, dart length, side seam balance, and the ease for daily activities.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.147-158
• /
• 2008

The purpose of this study was to analyze the kinematical variables involved in two types of service motion in tennis pinpoint and platform stance, to find the fastest serving method. Seven skilled high school tennis players participated, and the kinematics were recorded by the Vicon motion analysis system. For the gathering and analysis of the data workstation, bodybuilder and polygon were used. During the back swing for the pinpoint stance, as the back leg moves forward the COM and the racquet moves more, thus taking 0.04 seconds longer than the platform stance. The body of the subject takes a bow-shape as the subject's foot moves back and their hip moves forward. This movement enables the subject to create more power during the backswing to impact. It also increases the spread of the COM racquet and the serve speed is increase. As there is no forward movement of the foot during the backswing of the platform stance, the COM and the racquet move less and thus the time required is shorter than that for the pinpoint stance by 0.04seconds. Similarly, the time spent creating the power for the serve is shortened, the COM racquet is narrower and the speed is lessened. However, the advantage of this serve is that it increases the stability.

• Korean System Dynamics Review
• /
• v.13 no.3
• /
• pp.47-66
• /
• 2012

This paper aims at investigating and identifying the factor that has led the back and forth relationship between China and the United States since 1989. Previous studies on this subject addressed the issue by taking either of two approaches: one with the micro view that interprets the back and forth relationship in the context of the end of the Cold war, on other hand, with the macro view that interprets the fragile relationship in the context of the rise of China. However, neither of the approaches explains with sufficiency the question at hand. Hence for the inquiry, this article suggests a fresh view by exploring alternative method of using a cognitive map of each nation's leader, Jiangzemin and Bill Clinton. This article provides an empirical analysis through the Selected works of Jiangzemin and the speeches of Bill Clinton in 1998 for the first time in the field of Sino-US relationship studies in Korea. With the results of the cognitive map analysis, we can reach the following four points. Firstly, indicators of the forth relationship between China and the US are: i) the recognition by Bill Clinton on the importance of China's economic growth and; ii) the US's cooperation of science technology with China. Second, the conflict between China and the US results from the discordance of opinions on the matter of human rights and military power. Second, the conflict will inevitably arise on environmental issues around the globe including a global warming. Third, while China has yet to find a legitimate reason to agree upon these issues with the US, the US urges China of its cooperation. Lastly, Both China and the US attach great importance to the alliance with Japan. This implicates that relatively, issues involving Japan take more control in the China-US relationship, than those of Korea Peninsula.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.795-806
• /
• 2001

This study is to classify the somatotypes of middle-aged women by many critera and figure out he characteristics of each somatotypes. The subjects are 614 middle-aged women between 35 and 59 years old and the research is based on anthropometric and photometric measurement by photographing their body parts. The results are as follows; 1. The result of factor analysis indicated that 11 factors were extracted through factor analysis and orthogonal rotation by the method of varimax and those factors comprised 85.71 percent of total variance. 2. As the result of cluster analysis the group of the middle-aged women is classified as 6 types. Type 1 is short, fat, H type in front and lean-back type on the side. Type 2 is standard in height and weight. Type 3 is standard height, fat, long upper body, bend-forward type and protrude of the hip on the side. Type 4 is tall, thin, short upper body, having clearly protrude of the back and hip and lean-back type on the side. Type 5 is neither short nor tall, slim, X type in front and I type on the side. Type 6 is tall, thin and B type on the side. 3. As the result of observing the mutual corresponding relation between these 6 groups and age/Rohrers Index, the somatotype of the middle-aged women is divided at the age of 45. Accordingly when it comes to progress the study of the middle-aged women in the future, we will have to observe the characteristics for dividing the first half and the second half of age of 45.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.34-39
• /
• 2018

The biggest topics in the automobile industry are light weightening and fuel efficiency improvement. There's a lot of research going on. It is focused on light weight materials. Light weight material is seen as the best way to reduce fuel consumption and to solve the problem of environmental pollution and resource depletion. For the light weight materials, new materials such as aluminum, magnesium, and carbon-hardening materials can be found. Research on the joining techniques of dual materials, improvement of material properties by improving the method of manufacture of existing materials, and studies on ultra-high strength steel sheets are expected to take up the most weight in lightweight materials. As the strength of the ultra-high strength steel sheets increases during forming, it is difficult to obtain dimensional precision due to the increase in elastic restoring force compared to mild or high strength steel sheets. Spring back is known to be affected by a number of factors due to poor plastic molding, and can be divided into the effects of the material spraying and the process. The study on the plasticitic variables were studied as plasticitic factors that can be controlled by a part company. Tensile testing of ultra-high strength materials was conducted to derive properties for plasticitic analysis and to analyze spring back with two factors controlling the height of the bead and blank holding force by adding tensile force and controlling the flow rate.

• Journal of Acupuncture Research
• /
• v.19 no.3
• /
• pp.138-155
• /
• 2002

Objective : The purpose of this study is to work on the problems and on the direction of the study regarding the evidence-based study of Acupuncture. Methods : We reviewed the PubMed electronic database. Eight articles of systematic review without meta-analysis and six articles without meta-analysis were selected. Results : In the study of eight articles of systematic review without meta-analysis, there were two articles on effectiveness of acupuncture and one on non-effectiveness of acupuncture. Four articles were about the changes according to the quality of randomized controlled trials. Also, one article was about the side-effect of acupuncture. In the study of six articles of systematic review with meta-analysis, there were two articles on Odds Ratio, two on Relative Risk, one on number-needed-to-treat, and two on 18 predefined methodological criteria. Conclusion : As the quality of RCTs was high, positive response decreased and as the quality of RCTs was low, positive response increased. For the study of evidence-based acupuncture, it is necessary that we conduct research on well-planned placebo acupuncture, large sample size, statistical method, method of searching and assessing literature and method of meta-analysis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.99-104
• /
• 2006

A semi-Lagrangian finite element scheme with objective time stepping algorithm for solving viscoelastic flow problem is presented. The convection terms in the momentum and constitutive equations are treated using a quasi-monotone semi-Lagrangian scheme, in which characteristic feet on a regular grid are traced backwards over a single time-step. Concerned with the generalized midpoint rule type of algorithms formulated to exactly preserve objectivity, we use the geometric transformation such as pull-back, push-forward operation. The method is applied to the 4:1 planar contraction problem for an Oldroyd B fluid for both creeping and inertial flow conditions.