• Journal of Korean Medicine Rehabilitation
• /
• v.27 no.4
• /
• pp.97-109
• /
• 2017

Objectives The aim of this study is to analyze the patients who have low back pain through registry. Methods We registered patients with low back pain who visited department of korean rehabilitation medicine in university hospitals on study. We collected data from 116 subjects consisted of 51 inpatients and 65 outpatients and ruled out 8 who didn't have pattern identification data at the point of inpatient or outpatient visit so we analyzed 108 in total. We used Pearson's product moment correlation to find correlationship among variables, and analyzed statistical data using Phyton scipy library stats package. Results We set general features, region of the pain, physical examination, ROM, questionnaire results, pattern identification as variables and draw a conclusion by analyzing these variables. Conclusions Registry aimed at low back pain patients was established in department of korean rehabilitation medicine of university hospitals and exploratory analysis based on data were made. Through the registry, we expect that more advanced studies will be performed; for example, executing research which verifies effectiveness and stability of korean medical treatment or developing tools to fill the gap between pattern identification and disease identification.

• Journal of Mechanical Science and Technology
• /
• v.16 no.11
• /
• pp.1359-1366
• /
• 2002

The measurement of residual stresses by the hole-drilling method has been used to evaluate residual stresses in structural members. In this method, eccentricity can usually occur between the hole center and rosette gage center. In this study, we obtained the magnitude of the error due to eccentricity of a hole through the finite element analysis. To predict the magnitude of the error due to eccentricity of a hole in the biaxial residual stress field, it could be learned through the back propagation neural network. The prediction results of the error using the trained neural network showed good agreement with FE analyzed results.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.370-376
• /
• 2009

The influence of magnetic saturation on electromagnetic field distribution in both a permanent-magnet direct-current (PMDC) motor and a field-winding (wound-field) direct-current (FWDC) motor, with the same output mechanical power, has been studied. In this paper, an approximate analytical method and time-stepping Finite Element Method (FEM) are used for prediction of Back-EMF and electromagnetic torque. No-load and rotor-lucked conditions, according to experimental measurements, and the FEM and analytical method studies of the motors have been considered. A sensitivity analysis has also been successfully accomplished on the major design parameters that affect motor performance. At last, these two DC motors are compared, in spite of their differences, on the basis of measured output characteristics.

• Journal of Power Electronics
• /
• v.14 no.3
• /
• pp.541-548
• /
• 2014

This paper presents a simple lead angle adjustment method for brushless DC motors. The proposed method is based on the motor current dynamics analysis during the current commutation interval. With the proposed scheme, the phase current and phase back-EMF voltage are in phase and the BLDC motor and drive system have a high efficiency induced by the reduced copper and conduction losses. Experimental results are shown to validate the proposed method.

• Journal of Korean Academy of Nursing
• /
• v.20 no.3
• /
• pp.324-340
• /
• 1990

Support has always been considered an important nursing concept. However, there is no agreement among nurse researchers as to a conceptual definition of supportive nursing or meaningful supportive behaviors. Clarification of the concept, support in nursing, is necessary to promote communication among nurses on nursing behaviors that are effective in providing support and on understanding the relevant properties and charcteristics of the concept, supportive nursing care. The objectives of the study were : 1. to analyse the concept, support in nursing, in order to provide a definition of supportive nursing care, and 2. to operationalize the definition of supportive nursing care and use it as an experimental nursing intervention for patients with low back pain. The first part of the study used the concept analysis approach developed by Walker and Avant(1983) to define the concept of supportive nursing care. The properties of supportive nursing care, defined by this analysis, included perception of supportive need, reciprocal interaction(Transaction), listening, providing empathy and information related to health, and confirmation of the patient's verbal and non - verbal response. The second part, the experimental part of the study, was done using King's(1970) Interpersonal Theory for Nursing. The concept, supportive nursing care, as defined in the concept analysis was operationalized and used as the experimental intervention. The experiment tested the effectiveness of the independent variable, supportive nursing care on the dependent variables, depression, mood and patient satisfaction, in the patients with low back pain in army hospitals. The instruments used to measure the dependent variables were Zung's(1965) Self- Rating Depression Scale, Ryman and Colleagues'(1974) Mood Questionnaire and LaMonica and Colleagues'(1986) Patient Satisfaction Scale. The experimental design used for this study was a Solomon 4 group experimental design. This design has the strength of allowing for observation of the main effects of supportive nursing care and pretesting, and for observation of the interaction effects of pretesting and supportive nursing care. The design includes one experimental group and three control groups. The Subjects of this study were 150 young male patients with low back pain on Neuro - Surgical Wards in three general army hospitals. There were 35 in the experimental group, 39 in the pre - posttest control group, 36 in the treatment - posttest control group and 40 in the posttest only control group. Supportive nursing care, as operationalized by the researcher according to the concept analysis, was given to the patients in the experimental group and the treatment -posttest control group, individually for 30 minute sessions, every other day for 5 days. Data collection was done using a questionnaire. The data were collected in a pretest one week before the supportive nursing care sessions, a posttest immediately after the sessions and follow- up test one week later. Hypotheses testing was done using 2×2 factorial analysis of variance and Meta analysis(Stouffer's Z method). The results of this study are summarized as follows : 1. Hypothesis Ⅰ, “There will be a difference on depression level between the patients with low back pain who receive supportive nursing care and those who do not receive supportive nursing care”, was supported (F＝8.49, p＜.05). 2. Hypothesis Ⅱ, “There will be a difference on mood level between the patients with low back pain who receive supportive nursing care and those who to not receive supportive nursing care”, was supported (Z meta＝2.17, p＜.05). 3. Hypothesis Ⅲ, “There will be a difference on satisfaction level between the patients with low back pain who receive supportive nursing care and those who do not receive supportive nursing care”, was supported (F＝13.67, p＜.05). 4. ANOVA, done to examine the interaction effect of history and maturation, showed no significant difference on the dependent variables between the observations of the pretest scores of the experimental group, the pretest scores of the pre- posttest control group and the posttest score of the posttest only control group. 5. To test for continuing effect of supportive nursing care, paired t-test was done to compare the scores for the dependent variables at the posttest and at the one week later follow-up test. No significant difference on the scores for the dependent variables was found between the posttest scores and the follow-up test scores for the two groups that received supportive nursing care, the experimental group and the treatment-posttest control group. In conclusion, it was found that in the case of young soldiers with low back pain in army hospitals, their depression level was decreased, their mood state was changed positively and their satisfaction level was increased by receiving supportive nursing care. Further, the effectiveness of the supportive nursing care lasted for at least one week in this study. The significance of this study to nursing is in the analysis of the concept of supportive nursing care and the demonstration of the effectiveness of supportive nursing care as an intervention within the limits of the study.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.4
• /
• pp.348-355
• /
• 2013

Objectives: In working environment measurement, sampling is an important stage for obtaining reliable result as analysis. A personal air sampling pump is one of the most fundamental and important element in the work environment measurement, but it remains at the level of calibrating the flow rate of the pump before and after sampling. There is no checking whether the flow rate set at the initial stage would be hold during sampling. The purpose of this study was to develop a method to evaluate the flow rate performance of particulate sampling pump with three-pieces cassette holder containing filters commonly used to sample particulate. Materials and methods: We tested back pressure of particulate sampling pumps commonly used in Korea with three-pieces cassette holder containing various filters, and tried to find out the combination conditions of filters in accordance with back pressure required by ISO standard 13137. Results: We found out the matrix of sampling media such as three-pieces cassette holder containing filters applicable to the pressure drop required by the ISO standard for evaluating the flow rate stability under increasing pressure drop and long term(8 hour) performance. Conclusions: This evaluation method using sampling media matrix for checking flow rate stability proposed by this study could be very useful tool to find out good performance pumps before sampling.

• Fashion & Textile Research Journal
• /
• v.20 no.6
• /
• pp.713-721
• /
• 2018

This study aimed to develop a draping manual for the basic bodice to be available in colleges and industries. For this, draping methods mentioned in six different textbooks were comparatively analyzed. As for the research method, draping methods were compared by using training textbook, and basic bodices designed with muslin were assessed using the 5-point Likert scale. First, the draping methods of basic bodices were comparatively analyzed. The main baselines were set as the center front line, the center back line, the bust line, and the shoulder blade line. The position of dart was suggested based on the princess line, in both the front and the back. The value of dart was classified as a fixed size with any associated excess. The length of dart was set based on the bust point and shoulder blade point or a fixed size. The amount of ease was randomly set based on the fixed size, bust circumference, waist circumference, interscye length, armholes and shoulder lines, or the worker's intuition. Second, according to the appearance evaluation of the patterns, the following patterns obtained the highest scores: A pattern 2.5cm away from the B.P point of the waist dart and shoulder dart in the frontal appearance, a pattern of 0.6~0.7cm ease for the front armhole, a pattern with an ease of 1.2cm in the bust and 0.6cm in the waist. As for back appearance, the pattern in which the point of waist dart is 2~3cm from the bust line received the highest score.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.3
• /
• pp.157-164
• /
• 2017

Objective: The purpose of this study was to investigate kinematic differences in back pike somersault in platform diving according to skill level and to apply the findings to improve performance. Method: Korean divers participating in this study were divided into a skilled group (age: $21.6{\pm}4.16y$, height: $1.68{\pm}0.03m$, weight: $62.0{\pm}3.94kg$, career: $12.6{\pm}5.13y$) and a less-skilled group (age: $20.6{\pm}2.7y$, height: $1.72{\pm}0.05m$, weight: $64.8{\pm}6.76kg$, career: $12.2{\pm}2.49y$) and an independent t-test was performed to analyze differences between groups at the moment of takeoff. Results: The two groups showed significant differences in displacement and velocity of center of mass (COM), takeoff angle, hip joint angle, knee joint angular velocity, and hip joint angular velocity at the takeoff (p<.05), and significant differences in displacement of COM, hip joint, and ankle joint during flight (p<.05). Conclusion: For a successful back pike, the COM should rise quickly in the vertical direction and the hip joint angle and angular velocity should increase. To improve performance, the back pike turn should be practiced on the ground before an attempt on a 10-m platform, to stretch the ankle and knee joints and enable quick flexion of the hip joint when turning in flight.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.2
• /
• pp.65-77
• /
• 2018

Purpose: By identifying the contents of the "Empty Home Utilization & Community Revitalization Model Project" which is a pilot project of empty homes back into use in Kyoto City and analyzing the characteristics of the case housing, the purpose of this study is to find out implications and suggest improvements for the domestic empty home utilization project. Methods: The scope of the survey covers seven project sites in the period from 2014 to 2016. The research method is to derive the physical and operational characteristics of the project, through the literature reviews related to bringing empty homes back into use in Kyoto City and the field survey including the space measurement and the operator interview. Results: First, in order to succeed in bringing empty homes back into use for community revitalization, the selection process of the project and the role of the public in and after supporting the project are important. Second, the important features that are required as a physical characteristic of the project are an advantage in location and an interactive space that is available at all time like a community cafe at the entrance. Third, as an operational characteristic of the empty home utilization project, it is advantageous for the local residents to participate as a business actor or an operator, and it is the continuous use of residents and outsiders by implementing an operating program that is suitable for the characteristics of the local community. Implications: The physical and operational activation factors to bring empty homes back into use need to be included as the project screening standards. And it is necessary for the public to develop the Intermediate Support Organization and to participate in linking with residents in order to carry out the empty homes utilization project effectively.

• Design & Manufacturing
• /
• v.16 no.1
• /
• pp.27-35
• /
• 2022

Thermoforming is a plastic manufacturing process that applies a force to stretch a film of heated thermoplastic material over an engineered mold to create a 3-dimensional shape. After forming, the shaped part can then be trimmed and finished to specification to meet an end-user's requirements. The process and thermoplastic materials are extremely versatile and can be utilized to manufacture parts for a very wide range of applications. In this study, based on K-BKZ nonlinear viscoelastic model, thermoforming process analysis was performed for an interior room-lamp. The predicted thickness was minimum at the corner of a molded film, and maximum at the center of the bottom. By using the Taguchi method of design of experiments, the effects of process conditions on residual stresses were investigated. The dominant factors were the liner thickness and the film heating time. As the thickness of the liner increased, the residual stress decreased. And it was found that the residual stress decreased significantly when the film heating temperature was higher than the glass transition temperature. A thermoforming mold and a trimming mold were manufactured, and the spring back was investigated through experiments. The dominant factors were film heating time, liner thickness, and lower mold temperature. As the film heating time and liner thickness increased, the spring back decreased. In addition, it was found that the spring back decreased as the lower mold temperature increased.