• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.3
• /
• pp.3860-3871
• /
• 1975

This experiment was carried out to establish the mechanized methods in stumping and root-clearing, which were the most important works in the reclamation of sloping uplands. The determination of optimum teeth interval of rake blades and its operation methods to reduce the quantity of transported topsoil during the works, are the aims of this investigation. A newly designed rake blade, whose net teeth intervals could be regulated by three stages as 15cm, 25cm, and 35cm, was manufactured to attach to the bulldozer of 13ton. The experiments were carried out at Kilsang-Myon, Kwangwha-Gun, from Aug. 9 to Aug. 23, 1975. For each interval, 36 test plots of 50${\times}$10mn in size, which were regulated under three levels of land slopes of 10, 20, and 30% and two different tree stand density of high or medium values, were randomly chosen and arranged by two-replicated split-split plot design. Each stump classified by its diameter was stumped and cleared by the rake dozer to be related between diameter and stumping time. The results obtained in this experiment can be summarized as follows: 1. Stumping times for the diameters ranging from 6 to 18cm of stumps are almost the same and they are not varied by the difference of teeth intervals of rake dozer. 2. By back-ward stumping method, the number of stumps which can be stumped per hour ranges almost from 100 to 170, showing significant difference with respect to the teeth intervals. The working area is sharply varied with not only the stand density of stumps but the teeth intervals. 3. Optimum stumping distance for each teeth interval of rake dozer to minimize the quantity of transported topsoil are varied with such the rates as it is 15m or 20m for 15cm of teeth interval, but 25m for 25cm or 35cm, respectively. The clearing distance could be chosen almost double as long as the operating distance. 4. The working areas per hour of the simultaneous stumping and clearing methods are no significant difference among the various treatments of working conditions, but they are affected by the operating techniques. However, the influencing factors of the working conditions as classified before and the working directions are ranged from 10 to 15 per cent of total working area, respectively. 5. The residual rates of stumps which are not stumped by the rake dozer in each test plot are generally reduced as the teeth interval gets narrower, but there are no significant difference among them. The mean residual rates average to be about 4% for the simultaneous stumping and clearing method. The back-ward stumping method are recommended to be supervised and directed by more than one man, to show the operator where the stumps are located. 6. The results according to the stumping and clearing methods are summarized as Table IV-2. And the selection of working methods is recommended to follow as shown in Fig. IV-9 with respect to the stand density of the field. 7. Generally speaking, the narrower the teeth interval, the better become the working results, but the more the quantity of transported topsoil is increased. Therefore, it is recommended that the teeth interval should be reduced from the present distance of more than 30cm to 25cm or 15cm, by developing suitable working methods through more field works and experiments.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1417-1425
• /
• 1990

In this paper, when the glass plate of fragile material is subjected to impact load, the fracture pattern and the generation phenomenon of cone crack were theoretically clarified by using the analysis method of impulsive stress in the first paper. The numerical analysis results of strain distribution at a distance of 0.1cm, from the impact loading point to 5cm, were compared with experimental results. The main conclusions obtained are as follows; (1) The generation phenomenon of cone crack at the impact fracture of the glass plate can be analytically confirmed by using the three dimensional dynamic theory of elasticity. And the numerical analysis results of strain distribution using this theory are relatively in close agreement with the crack size obtained from the impact fracture experiment. (2) After the stress wave generated at the impact point propagated to the spherical compressive wave, this stress wave reflected from the back surface and reached again at the surface of the plate to the spherical stress wave. Then the generation of cone crack can be confirmed along the stress wave surface. (3) The plate is the thicker, the more is the generation phenomenon of cone crack at the lower impact velocity range (20m/s-35m/s). Because the fracture generate before the maximum tensile stress acting to the glass plate, cone crack was rarely ever generated.

• Cartoon and Animation Studies
• /
• s.45
• /
• pp.177-195
• /
• 2016

This article analyzes Sergei Eisenstein's acting theory, which is famous for his Russian montage. According to the existing discussions, he avoids the psychological realism through the concept of cut acting. It is a method like montage from the viewpoint that the practice of the cut action is segmented into shots. While Vsevolod Pudovkin, who asserts a connection montage, is looking for performance to portray a gradual change of emotion adopted by Konstantin Stanislavsky's psychological realism, Eisenstein prefers the acting of Vsevolod Meyerhold's masks in the same manner as the collision montage. This article traces the viewpoints on acting and actor that Eisenstein posed throughout his montage theory. It focuses on Film Sense(1942) and Film Form(1949), which are a collection of articles written by Eisenstein. As a result of examining the domestic and foreign literatures centering on Korean and English, it is hard to find the discussions on the analysis of Eisenstein's acting theory. Almost all of them are concentrated in his montage, among which the mention of acting is extremely limited. The cut acting, the typage, the inner techniques and processes of actor that express and induce the living emotions, and the acting of the integrating into diversity as one of the inner language are useful concepts in the creation and case analysis of contemporary films. Especially, his acting theory can be applied in the creation process of cartoons, webtoons, and animations which can meet the most decisive and impressive montage technique of Eisenstein. It is also possible to find many related cases for the analysis. This is why I look back on Eisenstein's film acting theory, and the results of the discussion will be a sufficient foundation for the derivation of related research.

• Journal of the Korean Society of Radiology
• /
• v.8 no.5
• /
• pp.255-260
• /
• 2014

The acute lumbar pain patients who were unavoidable to take MRI examination were made to take altered lateral recumbent position. they were also not able to control their painfulness and to be in supine position. In this study, it is supposed to increase success rate of the MRI examination through taking the altered lateral recumbent position in using spine and body matrix coil. This altered position made relaxing lumber pain and fatigue for the patients who suffered from sever lumber pain. In these reasons, it decreases the motion artifacts through correcting uncomfortable posture. As a result, qualitative analysis for the image quality was estimated to have average points of supine position A group(lateral recumbent position) of normal candidates and B group(lateral recumbent position) of the abnormal candidates who have sever pain at 4.64, 3.44, and 3.40, respectively. In conclusion, while qualitative analysis in the examination with supine position of the normal patients had significantly high points, the qualitative analysis in the examination with lateral recumbent position of the normal patients and abnormal patients who had sever lumbar pain was almost same. In addition, it was judged that radiologists' imagery interpretation had no other problems in the image evaluation of B group who had acute lumbar pain of abnormal patients. Hereupon, if this technique becomes generalized for the patients who suffer from supine position in the examination, it is supposed to be useful in medical field.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.2
• /
• pp.79-85
• /
• 2018

A two-way pump can reduce costs by draining and circulating water out and into the drum of the washing machine using a single motor whereas a conventional one-way pump uses two motors for doing the same function. However, when the water is drained through the drainage outlet in the two-way pump casing, a backward or inhalation flow occurs and the water flows to the circulation outlet. Likewise, when the water is circulated, the backward flow or inhalation makes the water flow to the drainage outlet. In this study, design optimization of the two-way pump casing is performed to maximize its performance while improving backward flow and inhalation occurring inside of the pump casing. For this, design variables of the pump casing that mainly affect the performance of the pump such as flow rate and torque of the motor were selected through the analysis of mean. Using response surface models for the performances, the ratio of the flow rate to the torque was maximized with satisfying the constraints for the back flow and inhalation through design optimization.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.6
• /
• pp.109-117
• /
• 2009

In this paper, an analytical model using equivalent magnetic circuits for the PMA-SynRG is presented. The lumped parameter model (LPM) is developed from machine geometry, stator winding and machine operating specifications. By the LPM, magnetic saturation of rotor bridges is incorporated into model and it provides effective means of predicting machine performance for a given machine geometry. The LPM is not as accurate as finite element analysis but the equivalent magnetic circuits provide fast means of analyzing electromagnetic characteristics of PMa-SynRG. It is the main advantage to find the initial design and optimum design. The initial design of PMa_RSG is performed by LPM model and FEM analysis, and the final PMA-RSG design is optimized and identified by FEM analysis considering actual machine design. The linear LPM and the nonlinear LPM are programmed using MATLAB and all of machine parameters are calculated very quickly. To verify justification of the proposed design of PMa-RSM, back-EMF is measured.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.150-155
• /
• 2019

Cavitation refers to a phenomenon in which empty spaces occur in a fluid due to changes in pressure and a velocity. When a liquid moves at a high speed, the pressure drops below the vapor pressure, and vapor bubbles are generated in the liquid. This study used CFD to analyze the flow of fluid machinery used in marine and offshore plants. The goals are to ensure the validity of the analysis method for marine propellers in an open water test, to increase the forward ratio, and to use FLUENT to understand the flow pattern due to cavitation. A three-dimensional analysis was performed and compared with experimental data from MOERI. The efficiency was highest at advance ratios of 0.7 - 0.8. Thrust was generated due to the difference between the pressure surface and the suction surface, and it was estimated that bubbles would be generated in the vicinity of the back side surface rather than the face side of the propeller, resulting in more cavitation. The cavitation decreased sharply as the advance ratio increased. The thrust and torque coefficients were comparable to those of the MOERI experimental data except at the advance ratio of 1, which showed a difference of less than 5%. Therefore, it was confirmed that CFD can evaluate an open water propeller test.

• International Journal of Computer Science & Network Security
• /
• v.23 no.1
• /
• pp.112-119
• /
• 2023

Traditionally used for networking computers and communications, the Internet has been evolving from the beginning. Internet is the backbone for many things on the web including social media. The concept of social networking which started in the early 1990s has also been growing with the internet. Social Networking Sites (SNSs) sprung and stayed back to an important element of internet usage mainly due to the services or provisions they allow on the web. Twitter and Facebook have become the primary means by which most individuals keep in touch with others and carry on substantive conversations. These sites allow the posting of photos, videos and support audio and video storage on the sites which can be shared amongst users. Although an attractive option, these provisions have also culminated in issues for these sites like posting offensive material. Though not always, users of SNSs have their share in promoting hate by their words or speeches which is difficult to be curtailed after being uploaded in the media. Hence, this article outlines a process for extracting user reviews from the Twitter corpus in order to identify instances of hate speech. Through the use of MPCA (Modified Principal Component Analysis) and ECNN, we are able to identify instances of hate speech in the text (Enhanced Convolutional Neural Network). With the use of NLP, a fully autonomous system for assessing syntax and meaning can be established (NLP). There is a strong emphasis on pre-processing, feature extraction, and classification. Cleansing the text by removing extra spaces, punctuation, and stop words is what normalization is all about. In the process of extracting features, these features that have already been processed are used. During the feature extraction process, the MPCA algorithm is used. It takes a set of related features and pulls out the ones that tell us the most about the dataset we give itThe proposed categorization method is then put forth as a means of detecting instances of hate speech or abusive language. It is argued that ECNN is superior to other methods for identifying hateful content online. It can take in massive amounts of data and quickly return accurate results, especially for larger datasets. As a result, the proposed MPCA+ECNN algorithm improves not only the F-measure values, but also the accuracy, precision, and recall.

• Journal of Korean Academy of Nursing
• /
• v.27 no.2
• /
• pp.411-422
• /
• 1997

The purpose of this study is twofold : (i) to investigate how much effort the married couples are making for the good health of both the pregnant woman and her unborn child from the time of their marriage to and during the period of conception : and (ii) to comprehensive investigate socio-cultural back-grounds which affect prenatal effort. Result of this study provide a basis for the prenatal care program which will be appropriate to our culture. This study has been done by the ethnographic research method. The subjects of this study are 53 people in all consisting of 33 pregnant women and 20 husbands. In order to investigate socio-cultural factors which influence Taegyo, producers of Taegyo music were interviewed. In addition the researcher surveyed the markets of Taegyo music, participated in special courses of prenatal education, analyzed the content of the books and periodicals dealing with Taegyo, and collected the concept of Taegyo distributed by the mass media. The full-fledged study continued for eight months from February to August.1996. The data were analyzed as soon as they were collected. Spradly's(1979, 1980) developmental, sequential method of domain analysis. taxonomic analysis, componential analysis, and theme analysis in this order was adopted as the procedure of analyzing the data. To obtain the exactness of study, Sandelowski's (1986) four criteria, that is, Credibility, Fittingness, Auditability, and Confirmability were applied to all stages of data collection, data analysis, the interpretation of the result, and the description of the result. The following are the result : 1. The couples' Taegyo at the stage of preconception was related to their physical, psychological, spiritual conditions under which a healthy baby will be born. Specific methods they prefer are : "the choice of one's spouse." "physical check-up," "physical good health, " "praying, " and so on. 2. When the marriod couple have sex in order to conceive, their Taegyo was related to the imposition of their physical, psychological, and environmental conditions. Specific methods they prefer are : "having sex at specific time, " "having sex in nice place." "to purify their minds while having sex," and so on. 3. The married couples' Taegyo while they are in pregnancy was related to the imposition of their physical. psychological, emotionmental. environmental, social and spiritual conditions. Specific methods they prefer are : "listening to music. " "reading," "looking at beautiful things only," "to avoid looking at or listening to bad things." "to eat food in good shape, " "to avoid drugs," "eating Korean herbal medicine." "sexual abstinence," "to avoid dangerous places," "to keep emotional tranquility," "moderate exercises and rest." "leading a pure life." "praying." "being aware of their words and behavior." "for the couple to keep a good relationship." "interaction with their unborn child," "to support Taegyo for pregnant women," and so on. 4. The married couple put Taegyo into practice on the basis of the following principles : the principle of respecting an unborn child, the principle of forming a good disposition. the principle of top-down parental love, the principle of synergy between a pregnant woman and her unborn child, the principle of expecting a good child, the principle of forming a good habit, and the principle of acquiring a parental role. 5. The practice of Taegyo is influenced by such factors as the married couple, the supporting system, and the mass media. As the husband -and-wife factor, their information of Taegyo, the degree of importance is assigned to their characters, their time to spare, their healthiness, the age of pregnant woman, their conception plan, their religion, their belief of the Taegyo effects, and the birth of a baby in this order. The factor of the supporting system consists of her husband's support, her family support, and her neighbor's support. The mass media factors include the broadcasting media, books specialized in Taegyo, periodicals for pregnant women, booklets for advertizing powdered milk, Taegyo music of record manufacturing companies, and the teaching materials for gifted children. Among these the mass media is especially taking advantage of Taegyo as its main source of economic profits are leading the public behavior pattern to a prodigal one. Taegyo is a self-control behavior which requires practice for the following : the physical and psychological good health of the pregnant woman and her unborn child, the development of the unborn child's good character, the development of the unborn child's intelligence and talents, the expectation of the unborn child's good features. shape a good habit, the expectation of the unborn child's bright future, and the learning of a parental role, the expectation of male birth. Above all it is a type of our good cultural tradition which pursues a value higher than the one that the prenatal care does. The principles of pregnancy care inherent in the habit of Taegyo will provide us a guideline for the development of the prenatal care.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.47-54
• /
• 2021

Purpose : In order to evaluate the usefulness of clinical application of the Pause & Resume methods by comparing and analyzing the data stability and dose reduction effect when repeat scan assuming irregular breathing and using the Pause & Resume method during chest 4D CT using Quasar^TM Phantom. Materials and Methods : Using the Quasar^TM Phantom, set the breathing rate per minute to 15 BPM and 7.5 BPM, and set the S15 point as an irregular breathing section, and then placed OSLD to this point and use the Pause & Resume method to measure the dose of S15. CTDIvol, DLP, and ALARA-CT were used for comparative analysis of radiation dose between Pause & Resume method and Repeat-scan. In order to evaluate the stability and usability of the data applying the Pause & Resume method, the captured images were sorted by Advanced Workstation Volume Share7 and then sent to Eclipse^TM, the diameter and volume were analyzed by forming a contour on the iron ball in the Quasar^TM Phantom Results : When using Pause & Resume, the dose of OSLD measurement increased by 1.97 times in the section of S15. As a result of image evaluation, the average value of all volumes measured with and without the Pause & Resume method at 15 BPM and 7.5 BPM was 15.2 cm3±0.5%.Allthemeasuredvaluesfor the radius of iron ball were 3.1 cm regardless of whether Pause & Resume method was used or not. In the case of using Pause & Resume, 33% decreased from the lowest DLP value and 38% decreased from the highest DLP value of repeat scan, and the effective dose also decreased 32.1% from the minimum value and 37.6% from the maximum value. Conclusion: Irradiation dose was increased by Pause & Resume method because of the repeat scan on the S15 site where assuming irregular breathing occurred, However Pause & Resume method led to a significant reduction in dose on overall scan range. It also proved the usefulness of clinical application of the Pause & Resume method as a result of similar diameters and volumes of iron ball measurement.