• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.15-26
• /
• 2003

This study was conducted to investigate the performance times, CM position and CM speed, pole chord length and pole chord angle, whole body angular momentum(X axis), and grip width in pole vault event according to the event and phase; touch down, pole plant, take-off, maximum pole bending pole straight, pole release, peak height, and foot contact, pole contact, free flight. The pole vaulting of four male elite vaulters including six trial were filmed using two video digital cameras at 60 Hz at 56th national athletic match, and data were collected through the DLT method of three dimensional cinematography. In general the better jumper is, the longer the performance time is. And the greater CM speed is, and the better his transformation ability of CM horizontal speed into vertical speed is. As he uses a longer pole, his grip is higher, and it is a enough for him to rock back his body, so that he pulls and pushes the pole well keeping his hips close to. An greater maximum angular momentum and early positioning of the hips parallel to the bar makes his body far side of the bar and his bar clearance easier. Specially our national jumper needs to have more powerful braking force during foot contact phase, and take his body on the pole after maximum pole bending, and pull and push the pole strongly keeping his hips close to. Also he needs to have stronger muscular strength in order to control the longer pole and use the pole of proper tension more efficiently.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.727-728
• /
• 2006

This paper is proposed robust control based on the vector controlled induction motor drive with adaptive fuzzy learning control(AFLC). The fuzzy logic principle is first utilized for the control rotor speed. AFLC scheme is then proposed in which the adaptation mechanism is executed using fuzzy logic. Also, this paper is proposed estimation of speed of induction motor using ANN Controller. The error between the desired state variable and the actual one is back-propagated to adjust the rotor speed, so that the actual state variable will coincide with the desired one. This paper is proposed the analysis results to verify the effectiveness of the new method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.7
• /
• pp.913-917
• /
• 2013

During the restoration process of primary restorative transmission system, some over voltages may happen due to nonlinear interaction between unloaded transformers and transmission systems. These over voltages caused by harmonic resonance can be suppressed by inserting damping loads before energizing transformers. But it is very difficult to predict the occurrence possibility of harmonic resonance and complex simulation must be repeated to estimate the sufficient damping loads. This paper presents a damping loads prediction system to prevent harmonic resonance. Detailed analysis of the relationship between harmonic resonance and the amount of damping loads is discussed. The prediction system is developed using a curve fitting and a neural network based on this relationship. A curve fitting used a Gaussian function based on non-linear least square method and multi-layer back-propagation neural network is applied. The system is applied to primary restorative transmission lines in korean power system and the result showed satisfactory performance.

• International Journal of Contents
• /
• v.7 no.1
• /
• pp.14-22
• /
• 2011

Temporal Sign Language Recognition (TSLR) from hand motion is an active area of gesture recognition research in facilitating efficient communication with deaf people. TSLR systems consist of two stages: a motion sensing step which extracts useful features from signers' motion and a classification process which classifies these features as a performed sign. This work focuses on two of the research problems, namely unknown time varying signal of sign languages in feature extraction stage and computing complexity and time consumption in classification stage due to a very large sign sequences database. In this paper, we propose a combination of Dynamic Time Warping (DTW) and application of the Single hidden Layer Feedforward Neural networks (SLFNs) trained by Extreme Learning Machine (ELM) to cope the limitations. DTW has several advantages over other approaches in that it can align the length of the time series data to a same prior size, while ELM is a useful technique for classifying these warped features. Our experiment demonstrates the efficiency of the proposed method with the recognition accuracy up to 98.67%. The proposed approach can be generalized to more detailed measurements so as to recognize hand gestures, body motion and facial expression.

• Journal of Society of Preventive Korean Medicine
• /
• v.19 no.2
• /
• pp.51-56
• /
• 2015

Objective : We analyzed present condition of cooperative medical care using claims data of HEALTH INSURANCE REVIEW & ASSESSMENT SERVICE form patients treated by Korean-Western cooperative medicine. The study aimed to offer guidelines in selecting disease-related research in developing Korean-Western convergence technology. Method : Based on the patients using Korean medical service, we analyzed claims data of patients using Korean medical service and western medical service from January 2012 to December 2013. We were assigned to the server remotely. With the concept of 'episode of care', we rebuilt claims data and analyzed present condition of cooperative medical usage. Results : We analyzed present condition of cooperative medical care per episode of care. Among outpatients, Low back pain, lumbar region(M5456) was the highest number. Among inpatients, Sciatica due to intervertebral disc disorder(M511) was the highest number. Conclusion : Based on the claims data provided by HEALTH INSURANCE REVIEW & ASSESSMENT SERVICE, we have derived a list of multy frequently disease frequently treated by cooperative medical care by analyzing present condition.

• Journal of Society of Preventive Korean Medicine
• /
• v.19 no.2
• /
• pp.67-74
• /
• 2015

Objective : The aim of this study was to investigate fatigue-related factors including socio-demographic variables and life styles among workers in the automobile manufacturing industry. Method : The subjects were 22,937 individuals who had received health examination by Korean Medical doctors and responded to questionnaires for 8 months from March to November in 2011. The fatigue index was measured by heart rate variability (HRV) in an automobile manufacturing industry. A multivariate analysis with SPSS version 19.0 was used to examine the relationship between fatigue and other factors including ages, smoke consumption, drinking frequency, exercise frequency, occupational category, conjugal condition. Results : In comparison between normal and very bad level of fatigue, factors of ages, smoking, drinking, and exercise showed significant difference(p<0.05). In addition, when normal and bad fatigue were compared, ages, smoking, exercise also produced significant difference(p<0.05). Furthermore, in normal and good level of fatigue comparison, occupation and smoking yielded significant difference(p<0.05). Finally, in other comparisons between normal and very good fatigue, exercise, smoking and occupation revealed significant difference(p<0.05). Conclusion : The results of this study suggest that age increase affects fatigue negatively, whereas exercise and drinking of once or twice per a week can have positive correlations.

• Analytical Science and Technology
• /
• v.14 no.1
• /
• pp.50-58
• /
• 2001

The effect of cryogenic heavy rolling method on grain refinement has been studied and compared with those obtained by previous methods of cryogenic rolling and heavy rolling developed separately. Both grain structure and grain size were analyzed using electron back scattered diffraction (EBSD), which can distinguish grains each other by means of crystallographic misorientations between them. The cryogenic rolling and heavy rolling exhibit reduction in grain size of 39% and 87%, respectively, and the cryogenic heavy rolling shows reduced grain size similar to that observed in the heavy rolling. The heavy rolling was proved more effective in grain size refinement than the cryogenic rolling.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.3
• /
• pp.217-223
• /
• 2011

Precise point positioning (PPP) is increasingly used in several parts such as monitoring of crustal movement and maintaining an international terrestrial reference frame using global positioning system (GPS) measurements. An accuracy of PPP data processing has been increased due to the use of the more precise satellite orbit/clock products. In this study we developed PPP algorithm that utilizes data collected by a GPS receiver. The measurement error modelling including the tropospheric error and the tidal model in data processing was considered to improve the positioning accuracy. The extended Kalman filter has been also employed to estimate the state parameters such as positioning information and float ambiguities. For the verification, we compared our results to other of International GNSS Service analysis center. As a result, the mean errors of the estimated position on the East-West, North-South and Up-Down direction for the five days were 0.9 cm, 0.32 cm, and 1.14 cm in 95% confidence level.

• Journal of the Korean Institute of Gas
• /
• v.13 no.1
• /
• pp.9-13
• /
• 2009

A cause of noise and vibration which come from a Combustion of gas heater are a combustion roar and Combustion oscillation. A character of a combustion roar is that sound pressure is distribute with broad band frequency. otherwise, The presence of combustion oscillation caused by positive Feed Back in Combustion Chamber break out a noise and vibration. Accordingly, The method that be solved a noise and vibration is to make each natural frequency different frequency. first, in order to solve problem, we control ratio of fuel and air. that is, Keep away resonance. second, in order to changing natural frequency of Combustion Chamber, We changed the shape of Economizer.

• Journal of Korean Physical Therapy Science
• /
• v.17 no.1_2
• /
• pp.23-32
• /
• 2010

Purpose: The purpose of this study was to investigate trunk and gluteal muscle activation during one-leg standing or two-leg standing with lumbar stabilizing taping using non-elastic tape. Method: The subjects of this study were twenty subjects(man=11, women=9) who be in good physical health and have not problem to back muscle and one leg standing. The surface electromyographic(EMG) data were recorded on external oblique(EO), gluteus medius(GMed), gluteus maximus(GMax), quadratus lumborum(QL) while pre- and post-lumbar stabilizing taping in two-leg standing and one-leg standing. The analysis of data was performed using the paired samples t-test to compare the difference of EMG activity of pre and post lumbar stabilizing taping. Result: Contrast of pre-lumbar stabilizing taping the muscle activity of QL in post-lumbar stabilizing taping is significant decrease on two-leg standing posture(p<.05), and the muscle activity of GMed is significant increase on one-leg standing posture(p<.05). Thus, we suggest that lumbar stabilizing taping using by functional tape will be able to affect on lumbar stability and gluteal muscle retraining.