• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2270-2275
• /
• 2011

The sintering behavior and microwave properties of ferrite ($Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics) were investigated for microwave applications. Also PIFA type antenna with ferrite was simulated. All samples were prepared by the solid state reaction method and sintered at $1350^{\circ}C$. All ceramics had relatively density above of 92% compare with theoretical density of $Ba_3Co_2Fe_{24}O_{41}$ ceramics. From the XRD pattens, the Z-type phase was existed as main phase in $Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics. The permittivity and permeability of $Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics were increased with Zn additions and decreased rapidly over frequency of 200~600 MHz. Several PIFA type antennas with ferrite and FR4 were simulated. All antenna structure had return loss of less than -10 dB at each resonant frequency. Simulated antenna using both ferrite and FR4 showed size reduction of 25% without a significant decrement of efficiency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.110-110
• /
• 2009

Aerosol deposition method(ADM)는 상온에서 에어로졸화된 고상의 원료분말을 노즐을 통해 분사시켜 소결과정을 거치지 않고도 상온에서 고밀도 후막을 제조할 수 있는 공정으로서, 다양한 재료의 코팅이 가능하고, 코팅층의 조성 및 화학 양론비의 제어가 용이한 특징을 갖는다. 본 연구에서는 ADM을 이용하여 큰 유전상수, 압전계수, 초전계수, 탄성계수를 갖는 $BaTiO_3$ 분말을 원료로 하여 압전소자, 커패시터, 고전압용 유전체 등에 응용이 가능한 세라믹 층 형성에 관한 연구를 진행하였다. 또한 $BaTiO_3$ 같은 강유전체 세라믹을 이용하여 여러 가지 소자를 제조하는 경우 소자의 미세조직에 따라 물성이 영향을 받는 것으로 확인되어져 있다. 이에 본 연구에서는 세라믹 분말보다 상대적으로 탄성이 큰 polymer 분말을 첨가하여 후막 내부의 결정립의 크기가 20 nm 의 평균 결정립을 갖는 세라믹 후막에 비해 최대 10 배 정도까지 증가하는 것을 확인할 수 있었으며, 이에 따라 후막에서의 유전율 및 유전손실율의 전기적 특성 변화를 확인할 수 있었고, 이러한 물성변화에 대한 원인 고찰을 위하여 후막의 미세구조 및 화학조성 등에 대한 다양한 분석이 이루어 졌으며, 상온에서 성막되는 후막의 세라믹 층의 응용을 위한 최적의 공정조건을 제시하고자 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.88-92
• /
• 2002

$Ba(Zn_{0.8}Co_{0.2})_{1/3}Ta_{2/3}O_3$ [BZCT(80/20)] ceramics were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of $1450{\sim}1550^{\circ}C$ for 5hr. in air. The structural properties of BZCT(80/20) ceramics were investigated as a function of sintering temperature. The BZCT(80/20) ceramics sintered at $1550^{\circ}C$ showed a polycrystalline complex perovskite structure without second phases and any unreacted materials. Increasing the sintering temperature, the bulk density and ordering were increased. The bulk density of the BZCT(80/20) ceramics sintered at $1550^{\circ}C$ was 7.50[$g/cm^2$]. Increasing the sintering temperature, the average grain size were increased and pore were decreased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.235-236
• /
• 2006

The contact resistance and grain boundary potential barrier of ceramic $BaTiO_3$ PTCR were investigated. The electroless plated Ni, evaporated Al, and Ag paste were chosen as electrode materials of PTCR device for comparison analysis before and after heat treatment. The contact resistance of electrode were measured by electrometer (dc), digital multimeter (dc), and LCR meter (ac). In the case of Al electroded samples, the heat treatment and protective oxide layer had high resistance and effect on the stability of PTCR effect against contact resistance degradation, but the Ag-paste had comparably high contact resistance before heat treatment and decreased after heat treatment with safe. On the other hand, the samples with electroless plated Ni electrode had good properties of contact resistance against aging.

• KSBB Journal
• /
• v.30 no.6
• /
• pp.291-295
• /
• 2015

The limited productivity of natural shell matrix proteins has hampered the investigation of their biochemical properties and practical applications, although biominerals in nature obtained by organic-inorganic assemblies have attractive mechanical and biological properties. Here, we prepared a vector for the expression of a fusion protein of a shell matrix protein from Pinctada fucata (named as GRP_BA) with the GRGDSP residue. The fusion protein of BA-RGD was simply produced in E. coli and purified through sequential steps including the treatment with $CaCl_2$ and EDTA solution for cell membrane washing, mechanical cell disruption and the application of non-ionic surfactant of Triton X-100 for BA-RGD inclusion body washing. The production yield was approximately 60 mg/L, any other protein band was not observed in SDS-PAGE and it was estimated that above 97% endotoxin was removed compared to the endotoxin level of whole cell. This study showed this simple and easy purification approach could be applied to the purification of BA-RGD fusion protein. It is expected that the protein could be utilized for the preparation of biominerals in practical aspects.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.638-642
• /
• 2010

The spinel material $Li_4Ti_5O_{12}$ has attracted considerable attention as an anode electrode material for many battery applications owing to its light weight and high energy density. However, the real capacity of $Li_4Ti_5O_{12}$ powder as determined by the solid-state method is lower than the ideal capacity. In this study, we investigated the effect of the dopants in M-doped spinel $Ba_xLi_{4-2x}Ti_5O_{12}$(x=0.005, 0.05, 0.1) powders prepared by the solid-state reaction method and used as the anode material in lithiumion batteries. The results confirmed the effect of the Ba and Sr dopants on the powder properties of the spinel $Li_4Ti_5O_{12}$, which exhibited a pure spinel structure without any secondary phase in its XRD pattern. Moreover, the electrochemical properties of the spinel M-LTO materials were investigated using a half cell. The electrochemical data show that cells with anodes made of undoped $Li_4Ti_5O_{12}$ and Ba- and Sr-doped $Li_4Ti_5O_{12}$ have discharge capacities of 97, 130, and 112 mAh/g, respectively, at the first cycle. Moreover, the Ba- and Sr-doped spinel $Li_4Ti_5O_{12}$ demonstrated good properties in the mid-voltage range at 1.55 V, showing stable cyclic voltammogram properties which surpassed those of the same material without Ba or Sr at 1 C after 100 cycles.

• Journal of Acupuncture Research
• /
• v.27 no.2
• /
• pp.23-30
• /
• 2010

Objectives : The second derivative of photoplethysmogram waveform(SDPTG) is a simple, convenient and non-invasive technique for pulse wave analysis. This study was designed to investigate the differences in the SDPTG between the affected side and the unaffected side in hemiparetic patients after stroke, and the effects of acupuncture at Palsa(BaXie) in hemiparetic patients after stroke. Methods : To evaluate the differences between the affected side and the unaffected side in hemiparetic patients after stroke, their SDPTG were recorded by using a Cardio Peri SA6000. To evaluate the effects of acupuncture at Palsa(BaXie) in 20 hemiparetic patients after stroke and 20 healthy subjects, their SDPTG were recorded 2 times(pre-acupuncture and post-acupuncture). The SDPTG consists of an a, b, c and d wave in systole and an e wave in diastole. Sano aging index was defined as (b-c-d)/a. Results : 1. The affected side in hemiparetic patients after stroke had higher average b/a ratio(p<0.05)and Sano aging index(p<0.05) than the unaffected side 2. In a comparison of pre-acupuncture and post-acupuncture at the Palsa(BaXie), b/a ratio(p<0.05) and Sano aging index(p<0.05) was decreased significantly in both hemiparetic patients and healthy subjects. Conclusions : These findings suggest that acupuncture at Palsa(BaXie) may be effective method of reverting some of the deleterious effects on vascular function produced by stroke.

• Journal of the Korean Ceramic Society
• /
• v.42 no.12 s.283
• /
• pp.800-807
• /
• 2005

Cathode material, $(Ba_{0.5}Sr_{0.5})_{0.99}Co_{0.8}Fe_{0.2}O_{3-\delta}$, for low temperature SOFC was prepared by the Glycine-Nitrate synthesis Process (GNP). Characteristics of the synthesized powders were studied with controlling the pH of a precursor solution. Highly acidic precursor solution increased a perovskite forming temperature. It is considered that Ba and Sr cannot complex by carboxylic acid group of glycine, because under highly acidic condition the caboxylic group mainly combined with H+ insead of alkaline earth cations. A lack of bond between cations and glycine resulted in selective precipitation of the elements during evaporation of the precursor solution. In case of using precursor solution with pH %2\~3$, a single perovskite phase was obtained at $1000^{\circ}C$. Polarization resistance of $(Ba_{0.5}Sr_{0.5})_{0.99}Co_{0.8}Fe_{0.2}O_{3-\delta}$ was measured by AC impedance spectroscopy from the two electrode symmetric cell. Area specific resistance of the $(Ba_{0.5}Sr_{0.5})_{0.99}Co_{0.8}Fe_{0.2}O_{3-\delta}$ air electrode at $500^{\circ}C\;and\;600^{\circ}C$ were $0.96{\Omega}{\cdot}cm^2\;and\;0.16{\Omega}{\cdot}cm^2$, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.4
• /
• pp.464-468
• /
• 2015

The production of gamma-aminobutyric acid (GABA) using GABA-producing lactic acid bacteria (LAB) has been considered to be an attractive strategy. However, some LAB may produce biogenic amines (BA), which may be of concern from the safety viewpoint. The aim of the present study was to characterize the production of GABA and BA in the soybean pastes fermented by Aspergillus oryzae (A. oryzae) FMB S46471 and GABA-producing Lactobacillus brevis (L. brevis) GABA 100. After a ripening period of 90 days, the levels of BA (putrescine, cadaverine, histamine, and tyramine) and GABA in the fermented soybean were assessed by highperformance liquid chromatography. The soybean pastes fermented by A. oryzae and L. brevis showed a range of 7,130-11,592 mg/kg for GABA, 178-305 mg/kg for tyramine, 139-163 mg/kg for putrescine, 7.4-10.8 mg/kg for histamine, and 7.1-7.9 mg/kg for cadaverine, whereas the soybean pastes fermented by A. oryzae only showed a range of 30-1,671 mg/kg for GABA, 0.8-189 mg/kg for tyramine, 1.3-85 mg/kg for putrescine, up to 3.6 mg/kg for histamine, and 0.2-2.4 mg/kg for cadaverine. The results showed that the production of GABA was accompanied by the increase in the production of BA, even though the production levels of histamine and cadaverine were very low. This is the first study to simultaneously characterize the production of BA and GABA in GABA-enriched fermented soybean pastes, and warrants further study to minimize the production of BA while optimizing the production of GABA.

• Journal of Life Science
• /
• v.20 no.5
• /
• pp.745-749
• /
• 2010

This study was conducted to examine the effect of cytokinin ($N^6$-benzyladenine; BA) and/or an IAA on ethylene production of maize (Zea mays) primary roots. When the two hormones were applied exogenously, both hormones synergistically increased ethylene production, which was greater than the sum of the level of each hormone's effect. For example, the ethylene production was stimulated between about 87% and 170% of the control by $10^{-4}\;M$ BA with $10^{-4}\;M$ IAA for 8 hours respectively, whereas the ethylene production was increased by about 480% of the control when the two hormones were treated simultaneously. Such a synergistic effect was also found in changes in the activity and gene expression level of ACC synthase. However, in the case of ACC oxidase did not show any observable effects. Based on our results, it is possible to conclude that BA and IAA stimulated the ethylene production synergistically by affecting the ACC synthase in maize roots.