• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.231-234
• /
• 2010

고온의 연소가스에 노출되는 디퓨저 냉각에 필요한 열량을 계산하였다. 디퓨저 내부는 공기와 혼합된 연소가스가 흐르고 디퓨저 벽체는 채널로 구성된 공간에 물이 흐르도록 되어 있다. 디퓨저 구조물과 유체 간에 또는 유체 자체적인 열전달과 구조물 내부의 열전달 현상은 복합적인 형태로 나타나는데 고온에서 작동하는 점을 고려하여 복사, 대류, 전도 모두를 적용 하였다. 열전달량 계산은 경험식에 근거한 1차원 해석과 CFD 해석의 2가지 방법으로 수행하였다. 1차원 해석은 경험식을 통해 얻어진 결과를 적용하여 열전달량을 산출하였고, CFD 해석은 DO 복사 열전달 모델을 적용하여 계산하였으며, 계산의 타당성을 검정하기 위하여 두 방법을 비교하였다. 총 열전달량의 차이는 1% 미만으로 거의 같았으나, 1차원 계산은 열전달 모델의 단순화로 디퓨저 입구에서의 순환영역을 구현하지 못하여 전체적인 열전달량 분포에서는 차이를 보였다. 디퓨저의 안정성을 확보하기 위한 냉각수 용량은 2가지 계산 결과를 조합하여 각 구간별로 최대 열전달량을 근거로 도출하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.729-732
• /
• 2010

본 연구는 케로신과 액체산소를 추진제로 사용하는 동축 와류형 분사기를 해석하기 위해 체계적인 물리 모델링을 수행하였다. 먼저 초임계 압력 조건에서 나타나는 실제유체의 열역학 및 전달 물성치를 계산할 수 있는 서브루틴 라이브러리를 구축하였으며, 층류 화염편 해석 코드와 연동하여 케로신 난류연소장의 국소화염구조를 해석하였다. 설계 목적에 맞는 계산 효율성을 확보하기 위해 동축 와류형 분사기는 RANS 기반의 2차원 축대칭 선회 유동으로 해석하였으며, 실험 결과가 존재하는 비연소 동축선회 제트 유동을 통해 예측정확도를 검증하였다. 실제 고압 연소를 수반하는 동축 와류형 분사기의 경우, 기존의 RANS 모델은 급격한 밀도 구배가 수반되는 선회 막 유동의 혼합층에서 과도한 난류확산을 야기하였으며, 난류모델의 수정을 위해 보다 심도 있는 연구가 필요할 것으로 판단되었다.

• Structural Engineering and Mechanics
• /
• 제57권2호
• /
• pp.327-355
• /
• 2016

A new analytical derivation of the elastodynamic point load solutions for an isotropic multi-layered half-space is presented by means of the precise integration method (PIM) and the approach of dual vector. The time-harmonic external load is prescribed either on the external boundary or in the interior of the solid medium. Starting with the axisymmetric governing motion equations in a cylindrical coordinate system, a second order ordinary differential matrix equation can be gained by making use of the Hankel integral transform. Employing the technique of dual vector, the second order ordinary differential matrix equation can be simplified into a first-order one. The approach of PIM is implemented to obtain the solutions of the ordinary differential matrix equation in the Hankel integral transform domain. The PIM is a highly accurate algorithm to solve sets of first-order ordinary differential equations and any desired accuracy of the dynamic point load solutions can be achieved. The numerical simulation is based on algebraic matrix operation. As a result, the computational effort is reduced to a great extent and the computation is unconditionally stable. Selected numerical trials are given to validate the accuracy and applicability of the proposed approach. More examples are discussed to portray the dependence of the load-displacement response on the isotropic parameters of the multi-layered media, the depth of external load and the frequency of excitation.

• Structural Engineering and Mechanics
• /
• 제66권1호
• /
• pp.45-59
• /
• 2018

The bi-material elastic system consisting of the pre-stressed hollow cylinder and pre-stresses surrounding infinite elastic medium is considered and it is assumed that the mentioned initial stresses in this system are caused with the compressing or stretching uniformly distributed normal forces acting at infinity in the direction which is parallel to the cylinder's axis. Moreover, it is assumed that on the internal surface of the cylinder the ring load which moves with constant velocity acts and within these frameworks it is required to determine the influence of the aforementioned initial stresses on the critical velocity of the moving load. The corresponding investigations are carried out within the framework of the so-called three-dimensional linearized theory of elastic waves in initially stresses bodies and the axisymmetric stress-strain state case is considered. The "moving coordinate system" method is used and the Fourier transform is employed for solution to the formulated mathematical problem and Fourier transformation of the sought values are determined analytically. However, the originals of those are determined numerically with the use of the Sommerfeld contour method. The critical velocity is determined from the criterion, according to which, the magnitudes of the absolute values of the stresses and displacements caused with the moving load approaches an infinity. Numerical results on the influence of the initial stresses on the critical velocity and interface normal and shear stresses are presented and discussed. In particular, it is established that the initial stretching (compressing) of the constituents of the system under consideration causes a decrease (an increase) in the values of the critical velocity.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1951-1956
• /
• 2004

The transient nature and complex flow geometries of two-phase gas-liquid flows cause fundamental difficulties when measuring flow velocity using an electromagnetic flowmeter. Recently, a current-sensing flowmeter was introduced to obtain measurements with high temporal resolution (Ahn et $al.^{(1)}$). In this study, current-sensing flowmeter theory was applied to measure the fast velocity transients in slug flows. To do this, the velocity fields of axisymmetric gas-liquid slug flow in a vertical pipe were obtained using Volume-of-Fluid (VOF) method and the virtual potential distributions for the electrodes of finite size were also computed using the finite volume method for the simulated slug flow. The output signal prediction for slug flow was carried out from the velocity and virtual potential (or weight function) fields. The flowmeter was numerically calibrated to obtain the cross-sectional liquid mean velocity at an electrode plane from the predicted output signal. Two calibration parameters are required for this procedure: a flow pattern coefficient and a localization parameter. The flow pattern coefficient was defined by the ratio of the liquid resistance between the electrodes for two-phase flow with respect to that for single-phase flow, and the localization parameter was introduced to avoid errors in the flowmeter readings caused by liquid acceleration or deceleration around the electrodes. These parameters were also calculated from the computed velocity and virtual potential fields. The results can be used to obtain the liquid mean velocity from the slug flow signal measured by a current-sensing flowmeter.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.142-151
• /
• 2013

This study develops an automation system for metallic mold design that is applicable in forging non-axial symmetric parts. The metallic mold design program is used to design the metallic mold using two-dimensional axial symmetric metallic molds and to predict the stress concentration using finite element analyses. Then, the program redesigns the metallic mold using variables such as the optimal split diameter, maximum allowable inner pressure, fit tolerance, and stress distribution, which are calculated using the metallic mold design program. When the involute spur gear is forged, stress concentration occurs on the tooth root bounded at the symmetric surface. The SCM4 material is suitable for metallic molds because the stress is less than the yield strength of the insert and it acts on the tooth root regardless of the inner pressure. The metallic mold for forging non-axial symmetric parts can be designed through adjusting the magnitude of the contact pressure. The program developed in this study can be applied to metallic mold designs in involute spur gears of forging, which is an ordinary non-axial symmetric part.

• 한국추진공학회지
• /
• 제20권2호
• /
• pp.39-45
• /
• 2016

동축형 다공성재 분사기에서는 기체가 분사기 중심을 지나는 액체 제트 주위를 둘러싼 다공성재를 통해 액체 제트를 향해 분사된다. 분사 방법의 차이로 인한 전단동축 분사기와 동축형 다공성재 분사기의 분열 메커니즘 차이를 살펴보기 위해, 전단동축 분사기와 동축형 다공성재 분사기를 사용하여 수류시험과 2-D 축대칭 수치해석을 진행하였다. 같은 유량조건에서의 가시화 이미지와 분무 평균입경을 비교하였으며, 수치해석을 통해 분사기 내부에서의 속도 분포가 액체 제트에 어떤 영향을 끼치는지 고찰하였다. 결과적으로, 기체의 유량이 늘어날수록 분사기 내부 속도가 낮음에도 동축형 다공성재 분사기의 미립화 및 혼합 성능이 전단동축 분사기에 비해 유리함을 확인할 수 있었다.

• Journal of Korean Dental Science
• /
• 제5권1호
• /
• pp.13-20
• /
• 2012

Purpose: The purpose of this study was to investigate the effect of patterning on the stress distribution in the bone tissue using the finite element analysis (FEA) model. Materials and Methods: For optimal comparison, it was assumed that the implant was axisymmetric and infinitely long. The implant was assumed to be completely embedded in the infinitely long cortical bone and to have 100% bone apposition. The implant-bone interface had completely fixed boundary conditions and received an infinitely big axial load. von Mises stress and maximal principal stress were analyzed. Conventional thread and 2 or 3 patterns on the upper and lower flank of the thread were compared. Result: The surface areas of patterned implants were increased up to 106~115%. The thread with patterns distributed stress better than conventional thread. Patterning in threads may produce more stress in the implant itself, but reduce stress in the surrounding bone. Stress patterns of von Mises stress were favorable with patterns, while the maximal principal stress was increased with patterns. Patterns in the lower flank showed favorable stress distribution. Conclusion: The patterns in implant thread reduce the stress generated in surrounding bone, but the number and position of patterns were crucial factors in stress distribution.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.699-702
• /
• 2004

In this study, the affect of mounting axisymmetrical supersonic inlet to airfoil, which has 65 degree swept angle was numerically investigated. The parameter for this calculation are tree stream Mach number M=2.0 and 2.5, the distance between inlet spike and airfoil lower surface $L_{sw}$/$R_{cowl}$ = 1.21-1.54 and angle of attack to the airfoil 0-4. The mass capture ratio improved 3points in M=2.0 condition and 1points in M=2.5 while the mass capture ratio without airfoil surface was 57% and 71 % for each case. These are the result from increase of density and change of velocity deflection by the shock wave structure formed between inlet and airfoil surface. On the other hand, the distortion of Mach number at cowl lip plane increased by 13% in M=2.0, 3% in M=2.5 condition. The effects of the angle attack on the mass capture ratio is greater than that of the shock wave interaction between inlet and cowl, but the effects to the distortion is smaller in the range of this calculation condition. In the condition of M=2.0 with 4 degrees of angle of attack, inlet distortion of Mach number is mainly caused by the affects of the shock wave interaction between inlet and airfoil surface, while the largest angle of the velocity vector in the radial direction at cowl lip plane is caused by the affect of angle of attack. This large velocity vector made the flow inside the cowl subsonic and caused spillage, which interfere with the boundary layer of airfoil surface.

• 한국추진공학회지
• /
• 제4권3호
• /
• pp.11-18
• /
• 2000

초음속 노즐 뒤에서 형성되는 과소팽창 제트(Underexpanded jet)가 분사될 때 베럴 충격파(Barrel shock), 팽창과(Expansion fan), 마하 디스크(Mach disc), 제트 경계면(Exhaust-gas jet boundary), 그리고 반사 충격파(Reflected shocks)와 같은 구조의 풍격파 셀(Shock cell)이 연속적으로 나타난다. 이러한 충격파 셀은 난류 소산에 의해 희미해지며 거리가 멀어지면 사라진다. 과소팽창 제트가 수직 평판에 충돌하게 되면 챔버 압력 및 출구 마하수 등 여러 인자들에 따라 달라지는 복잡한 유동장을 형성하게 된다. 본 논문에서는 평판에 충돌하는 과소팽창 제트가 형성하는 유동장을 압축성 Navier-Stokes 방정식에 유한체적법을 적용하여 수치적으로 구한 해존 실험 데이터와 비교 검증하였다. 실험 데이터와 계산 결과의 압력구배 및 유동가시화 사진 비교 견과 노즐과 평판이 가까운 경우에 충돌제트유동을 잘 예측할 수 있었으며, 과소팽창비가 작을 때 과소팽창비에 따른 충돌제트 유동분포의 영향은 자게 나타남을 알 수 있었다.