• 한국지반신소재학회논문집
• /
• 제7권4호
• /
• pp.25-36
• /
• 2008

본 논문에서는 수치해석적 접근을 통해 연약지반에 시공되는 지오그리드 감쌈 스톤컬럼의 하중지지 특성을 고찰한 내용을 다루었다. 지오그리드로 감싼 스톤컬럼의 보강효과에 대해 검증된 유한요소모델을 이용하여 축대칭 및 3차원 응력-간극수압연계해석을 토대로 매개변수 연구를 수행하였다. 해석결과를 종합한 결과 지오그리드로 감싼 스톤컬럼의 하중지지 특성이 향상되는 경향을 나타내었다. 아울러 보강재의 감쌈길이와 축강성이 지오그리드 감쌈 스톤컬럼의 주된 설계변수가 되며, 지오그리드 보강효과를 극대화 할 수 있는 지오그리드의 임계감쌈길이 및 임계강성이 존재하는 것으로 나타났다.

• 콘크리트학회논문집
• /
• 제11권6호
• /
• pp.101-112
• /
• 1999

Structural walls have been mostly used for the design of reinforced concrete buildings in seismic areas because they play a role as an efficient bracing system and offer great potential for lateral load resistance and drift control. The lateral resistance system for the earthquake load should be designed to have enough ductility and stable hysteretic response in the critical regions where plastic deformation occurred beyond yielding. The behavior of the reinforced concrete element to experience large deformation in the critical areas by a major earthquake is affected by the performance of the confined core concrete. Thus, the confinement of concrete by suitable arrangements of transverse reinforcement results in a significant increase in both the strength and ductility of compressed concrete. This paper reports the experimental results of reinforced concrete structural walls for wall-type apartment structure under axial loads and cyclic reversal of lateral loads with different confinement of the boundary elements. The results show that confinement of the boundary element by open 'U'-bar and cross tie is effective. The shear strength capacity is not increased by the confinement but deformation capacity is improve.

• Steel and Composite Structures
• /
• 제27권5호
• /
• pp.555-566
• /
• 2018

A 1/3 composite cylindrical shell with a central rectangular opening was axially compressed experimentally, and its critical buckling load and displacement, and strains were measured. A finite element model (FEM) of the shell with Hashin failure criteria was established to analyze its buckling and post-buckling behaviors by nonlinear Newton-Raphson method. The geometric imperfection sensitivity and the effect of side supported conditions of the shell were investigated. It was found that the Newton-Raphson method can be used to analyze the buckling and post-buckling behaviors of the shell. The shell is not sensitive to initial geometric imperfection. And the support design of the shell by side stiffeners is a good way to obtain the critical buckling load and simplify the experimental fixture.

• 공학논문집
• /
• 제6권1호
• /
• pp.83-96
• /
• 2004

강판파일로 지지되고 있는 미니 교대하부에, 압성토의 제거에 따른 교대의 안정성을 확보하기 위한 방법으로서 쏘일네일링 공법을 채택하였다. 네일벽체에 각종 계측기를 매설하여 벽체의 거동을 추적하였다. 또한 3차원 유한요소해석기법을 이용하여 쏘일네일 벽체와 기존 구조물사이의 상호영향과 관련된 벽체의 거동을 분석하였다. 압성토의 순차적 제거와 네일타설 등의 전 축조 시퀀스를 모델링 할 수 있는 기법을 개발하였으며 개발된 시뮬레이션 기법의 타당성을 검증하기 위해 현장에 축조된 실물 계측데이터를 이용하여 보정하였고, 압성토의 제거와 네일타설이 기존 파일의 축하중 및 휨모멘트에 미치는 영향과 네일 인장력의 변화와의 상관관계 등, 설계시 고려되어야 할 몇 가지 주요한 사항에 대한 해석결과를 구할 수 있었다.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.890-897
• /
• 2003

This paper compares engineering estimation schemes of C＊ and creep COD for circumferential and axial through-wall cracked pipes at elevated temperatures with detailed 3-D elastic-creep finite element results. Engineering estimation schemes included the GE/EPRI method, the reference stress method where reference stress is defined based on the plastic limit load and the enhanced reference stress method where the reference stress is defined based on the optimized reference load. Systematic investigations are made not only on the effect of creep-deformation behaviour on C＊ and creep COD, but also on effects of the crack location, the pipe geometry, the crack length and the loading mode. Comparison of the FE results with engineering estimations provides that for idealized power law creep, estimated C＊ and COD rate results from the GE/EPRI method agree best with FE results. For general creep-deformation laws where either primary or tertiary creep is important and thus the GE/EPRI method is hard to apply, on the other hand, the enhanced reference stress method provides more accurate and robust estimations for C* and COD rate than the reference stress method.

• Structural Engineering and Mechanics
• /
• 제57권6호
• /
• pp.1065-1084
• /
• 2016

The analysis and design of skeletal structures is greatly influenced by the behaviour of beam-to-column connections, where patented designs have led to a wide range of types with differing structural quantities. The behaviour of beam-to-column connections plays an important role in the analysis and design of framed structures. This paper presents an overview of the influence of connection behaviour on structural stability, in the in-plane (bending) mode of sway. A computer-based method is presented for geometrically nonlinear plane frames with semi-rigid connections accounting for shear deformations. The analytical procedure employs transcendental modified stability functions to model the effect of axial force on the stiffness of members. The member stiffness matrix were found. The critical load has been searched as a suitable load parameter for the loss of stability of the system. Several examples are presented to demonstrate the validity of the analysis procedure. The method is readily implemented on a computer using matrix structural analysis techniques and is applicable for the efficient nonlinear analysis of frameworks. Combined with a parametric column effective length study, connection and frame stiffness are used to propose a method for the analysis of semi-rigid frames where column effective lengths are greatly reduced and second order (deflection induced) bending moments in the column may be distributed via the connectors to the beams, leading to significant economies.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.158-163
• /
• 2009

Many longitudinal pipes in ships are subject to considerable loads, caused by hull girder bending in the ships and/or thermal loads in some special pipes through which fluids with highly abnormal temperatures are conveyed. As these loads may cause failure in the pipes or their supporting structures, loops have been widely adopted to prevent such failure, based on the idea that they can lower the stress level in a pipe byabsorbing some portion of these loads. But as the loops also have some negative effects, such as causing extra manufacturing cost, deteriorating the function of the pipe, and occupying extra space, the number and dimensions of these loops need to be minimized. This research developed design formulas for pipe loops, modeling them as a spring element, for which the axial stiffness is calculated based on the beam theory, incorporating the flexibility effect of the straight portion of the pipe. The accuracy of the proposed design formulas was verified by comparing two results obtained from the proposed formulas and MSC/NASTRAN. This paper concludes with a sample application of the proposed formulas, showing their efficiency.

• Steel and Composite Structures
• /
• 제16권3호
• /
• pp.325-337
• /
• 2014

The strength and buckling problem of a five layer sandwich beam under axial compression or bending is presented. Two faces of the beam are thin aluminium sheets and the core is made of aluminium foam. Between the faces and the core there are two thin binding glue layers. In the paper a mathematical model of the field of displacements, which includes a share effect and a bending moment, is presented. The system of partial differential equations of equilibrium for the five layer sandwich beam is derived on the basis of the principle of stationary total potential energy. The equations are analytically solved and the critical load is obtained. For comparison reasons a finite element model of the beam is formulated. For the case of bended beam the static analysis has been performed to obtain the stress distribution across the height of the beam. For the axially compressed beam the buckling analysis was carried out to determine the buckling load and buckling shape. Moreover, experimental investigations are carried out for two beams. The comparison of the results obtained in the analytical and numerical (FEM) analysis is shown in graphs and figures. The main aim of the paper is to present an analytical model of the five layer beam and to compare the results of the theoretical, numerical and experimental analyses.

• 대한조선학회지
• /
• 제27권1호
• /
• pp.17-23
• /
• 1990

세장비가 작은 구조부재는 충돌과 같은 상황하에서 압축을 받는 경우, 축방향으로 접혀지는 소성 변형에 의해서 충돌에너지의 대부분을 흡수한다. 이 경우, 관성을 무시한다 하더라도 연강 부재의 정적인 하중에 대한 압괴강도에 비해서 변형률에 의한 영향으로 인해 동적 압괴 강도가 높아진다는 것은 잘 알려진 사실이다. 본 논문에서는 부재의 정적 하중에 대한 압괴강도 추정법을 소성변형의 운동학적 방법을 이용하여 수행하였다. 종래의 항복하중에 변형률을 고려한 동적 압괴 하중 추정치가 동적 영향을 과대평가하게 되므로 평균 소성변형 응력의 변형률에 대한 영향을 고려하여 튜브부재의 동적 압괴 강도 추정을 유도하였고, 이를 발표된 실험결과와 비교 검토하였다. 본 연구에서 얻은 만족스러운 결과를 토대로 하여 앞으로 이 방법을 선박의 충돌시 선수구조의 충돌에너지 흡수의 추정에 적용시킬 것이다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.242-246
• /
• 2004

Effects of circumferentially local wall thinning on the fracture behavior of pipes were investigated by monotonic four-point bending. Local wall thinning was machined on the pipes in order to simulate erosion/corrosion metal loss. The configurations of the eroded area included an eroded ratio of d/t= 0.2, 0.5, 0.6, and 0.8, and an eroded length of I = 10 mm, 25 mm, and 120 mm. Fracture type could be classified into ovalization, local buckling, and crack initiation depending on the eroded length and eroded ratio. Three-dimensional elasto-plastic analyses were also carried out using the finite element method, which is able to accurately simulate fracture behaviors excepting failure due to cracking. It was possible to predict the crack initiation point by estimating true fracture ductility under multi-axial stress conditions at the center of the eroded area.