• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1247-1252
• /
• 2004

The present paper is devoted to the modeling method based on an averaging approach for thermal analysis of microchannel heat sinks subjected to the uniform wall temperature condition. Solutions for velocity and temperature distributions are presented using the averaging approach. When the aspect ratio of the microchannel is higher than 1, these solutions accurately evaluate thermal resistances of heat sinks. Asymptotic solutions for velocity and temperature distributions at the high-aspect-ratio limit are alsopresented by using the scale analysis. Asymptotic solutions are simple, but shown to predict thermal resistances accurately when the aspect ratio is higher than 10. The effects of the aspect ratio and the porosity on the friction factor and the Nusselt number are presented. Characteristics of the thermal resistance of microchannel heat sinks are also discussed.

• 한국해양학회지
• /
• v.7 no.2
• /
• pp.47-58
• /
• 1972

Densities and composition of phytoplankton and zooplankton, concentrations of particulate organic carbon, particulate organic nitrogen, and particulate inorganic matter were determined in the coastal area of Ko-ri during one year. There are peaks of densities of plankton organisms in summer, autumn, and spring Concentrations of particulate organic carbon ranged from 35 to 3,785 mg/㎥ (averaging 868mg/㎥ ), particulate organic nitrogen ranged from 4.4 to 158mg/㎥ (averaging 45mg/㎥), inorganic suspended matter ranged from 0.6 to 11.6 mg/L (averaging 5.7mg/L), and the carbon-nitrogen ratios of the suspended matter were varied from 0.5 to 231(averaging 35), with each seasonal cycle. The phytoplankton density and particulate organic carbon were possitively correlated from March to November, negatively from December to February, and the zooplankton dinsity and particulate organic nitrogen were well correlated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1323-1326
• /
• 2007

A new driving method employing 2-dimensional spatial averaging is proposed. This method successfully eliminates the vertical line artifact caused by luminance difference from unbalanced charging voltage between polarities. This spatial averaging method can secure charging time, minimize driver heating, and achieve higher display quality.

• Journal of the Chungcheong Mathematical Society
• /
• v.28 no.2
• /
• pp.251-259
• /
• 2015

Let $\mathbb{F}^d_q$ be a d-dimensional vector space over a finite field $\mathbb{F}^d_q$ with q elements. We endow the space $\mathbb{F}^d_q$ with a normalized counting measure dx. Let ${\sigma}$ be a normalized surface measure on an algebraic variety V contained in the space ($\mathbb{F}^d_q$, dx). We define the restricted averaging operator AV by $A_Vf(X)=f*{\sigma}(x)$ for $x{\in}V$, where $f:(\mathbb{F}^d_q,dx){\rightarrow}\mathbb{C}$: In this paper, we initially investigate $L^p{\rightarrow}L^r$ estimates of the restricted averaging operator AV. As a main result, we obtain the optimal results on this problem in the case when the varieties V are any nondegenerate algebraic curves in two dimensional vector spaces over finite fields. The Fourier restriction estimates for curves on $\mathbb{F}^2_q$ play a crucial role in proving our results.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1430-1435
• /
• 2004

The present paper is devoted to the modeling based on an averaging approach for microchannel heat sinks. Firstly, analytic solutions for velocity and temperature distributions for low-aspect-ratio microchannel heat sinks are presented by using the averaging approach. When the aspect ratio of the microchannel is smaller than 1, analytic solutions accurately evaluate thermal resistances of heat sinks while the previous model cannot predict thermal resistances. Secondly, asymptotic solutions for velocity and temperature distributions at low-aspect-ratio limit and at high-aspect-ratio limit are presented by using the scale analysis. Asymptotic solutions are very simple, but shown to predict thermal resistances accurately.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.3
• /
• pp.55-62
• /
• 1997

For the effective removal of artifacts and the extraction of an improved evoked potential response, we propose the averaging method usin gthe shrinkag eof wavelet coefficients. The wavelet analysis decomposes the measured evoked potentials into scale coefficients with low frequency components and wavelet coefficients with high ones as a resolution level, respectively. and in the course of synthesis evoked potentials, the presented method shrinks the wavelet coefficients, and then reproduces the evoked potentials, and lastly averages it. We measured visual evoked potentials to simulate the averaging method using the shrinkage of wavelet coefficients, and compared it with aveaged signal. As a result of simulations, the proposed method gets improved VEP about 0.2-1.6dB in comparison with the averaging method with daubechies wavelet in the resolution level four.

• Industrial Engineering and Management Systems
• /
• v.8 no.2
• /
• pp.93-100
• /
• 2009

In this paper, we review widely used methods to extract local volatility surfaces (LVSs) from implied volatility surfaces (IVSs) and suggest a model averaging method for constructing implied and local volatility surfaces weighted by trading volumes. It makes use of model averaging method by means of bandwidth priors, and then produces a robust LVS estimation. The method is shown to provide the information about the confidence interval of estimators as well as a rather less variable weighted mean value for the IVS and LVS. To show the merits of our proposed method, we conduct simulations on equity-linked warrants (ELWs) with reasonable and acceptable results.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.261-269
• /
• 2013

In this paper, the evoked potential(EP) was represented by additive delay model to comply with the variational noisy response of stimulus-event synchronization. The hybrid method of delay compensated-Wiener filtered-ensemble averaging(DWEA) was proposed to enhance the EP signal distortion occurred during averaging procedure due to synchronization timing mismatch. The performance of DWEA has been tested by surrogated simulation, which is composed of synthesized arbitrary delay and arbitrary level of added noise. The performance of DWEA is better than those of Wiener filtered-ensemble averaging and of conventional ensemble averaging. DWEA is endurable up to added noise gain of 7 for 10 % mean square error limit. Throughout the experimentation observation, it has been demonstrated that DWEA can be applied to enhance the evoked potential having the synchronization mismatch with added noise.

• Journal of the Korean earth science society
• /
• v.26 no.6
• /
• pp.541-550
• /
• 2005

Molluscan shells were sampled from the continental shelf of South Sea: 19 stations in the southeast continental shelf and 5 in the southwest sea, in order to understand characteristics of sea level changes and time-averaging since the last glacial age. Radiocarbon dates were made on 42 dominant and specific species which were sampled from 24 stations. Time-averaging was observed and showed to be 11,939 years in age difference. The sea-level ranged from 150 to 160 m below sea level during the LGM (about 15,000 yrs B.P). The sea-level significantly rose to 60 m at around 9,000 yrs B.P. and became stable at 50 to 60 m between periods between 4,000 and 5,000 yrs B.P. Between 3,000 and 4,000 yrs B.P, the sea-level rapidly rose to a depth of $10\~20m$ below today’s present sea level.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.177-178
• /
• 2006

Many authors issued the feature-preserving averaging technique according to positioning and scaling process using landmarks, which represent the geometric characteristics of three dimensional surface models. Such a technique should be done by manual procedure, choosing and marking the landmarks on each bone surface before averaging process. In this study, we produced another averaging technique without having to use such manual procedure, and made averaging models from three dimensional surface data that were reconstructed from computerized tomography images of Digital Korean Project. The bone models were subjected to orthogonal coordinator system. These models were transformed to coincide mass center and to align principal axis. Then, bone models were scaled according to average length data of sample bone models on all axis(x, y, z). After establishing voxellar hexahedron space which contain all sample bone models, we counted the number of overlapping for each voxel. We generated the three dimensional average surface by displaying the yokels that have more overlapping number than boundary number. The boundary number was decided when the average volume of each bone equal to the volume of bone that would be averaged. Using this technique, we can make a feature-preserving averaging volume of bones.