• Journal of Korean Society for Quality Management
• /
• v.24 no.1
• /
• pp.73-86
• /
• 1996

Adaptive EWMA(Exponentially Weighted Moving Average)-x control chart using the Kalman gain recursive average is designed. The designed control chart is effective to on-line process monitoring as continuous flow processes. Performance evaluation between the designed control chart and traditional one is implemented. For this, ARL(Average Run Length) is adopted as a criterion. Results show that the designed adaptive EWMA-x control chart has shorter ARL than EWMA-x control chart when process mean is shifted. This model can be extended to process prevention control. The methodology proposed in this research is turned out to show the high performance than that of the given methodologies.

• Development and Reproduction
• /
• v.24 no.1
• /
• pp.63-70
• /
• 2020

This study aimed to investigate early life of Coreoperca herzi living in Han River and compare morphological differences between different groups during the development in order to provide basic data for relevant taxonomic research. On average, one female individual spawned 541 to 861 eggs (average 701) at once. After 259 hours, the tail broke out of the egg membrane and hatching began. Immediately after hatching, the larvae were average 7.81±0.10 mm (n=5) in total length. 60 days the juvenile was average 35.9±1.30 mm (n=5) in total length. The white spots spread to the rest of the body, rending the same pattern as that on the body of their broodstock fish.

• Journal of the Korea Furniture Society
• /
• v.27 no.4
• /
• pp.302-308
• /
• 2016

It has been known that acetylation improves the dimensional stability of wood. Liquid phase acetylation is more popular than gas-phase acetylation for the effectiveness of weight gain of wood. In this study the specimens of domestic red and Korean pines are acetylated in liquid phase and their physical properties, such as density, bending strength, anti-hygroscopicity etc., are analyzed. Acetylation increases the average weights and volume of larch specimens by 11.4% and 3.4%, respectively, and their average oven-dry densities are increased by $0.03g/cm^3$. Acetylation does not influence on Modulus of Rupture (MOR) and Modulus of Elasticity (MOE). The average Percentage Reduction in Hygroscopicity (PRH) and average Percentage Reduction in Water soaking (PRW) of larch specimens are respectively 20.2% and 20.8%. Thus it can be concluded that acetylation improves the dimensional stability of larch specimens.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.25-31
• /
• 2003

There are a lot of factors influencing on the automobile fuel economy such as average speed, average acceleration, acceleration sum per kilometer, and so on. In this study, various driving data were recorded during road tests. The accumulated road test mileage in Seoul metropolitan area is around 1,300 kilometers. The data were analyzed by multivariate statistical techniques including correlation analysis, principal component analysis, and multiple linear regression analysis. The analyzed results show that the average trip time per kilometer is one of the most important factors to fuel consumption and the increase of the average speed is desirable for reducing emissions and fuel consumption.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.6-7
• /
• 2011

본 논문에서는 지역적 학습 방법을 활용하는 Average Neighborhood Margin Maximization(ANMM)에 기반하여 피부색과 비피부색 영역을 분리하는 이진 분류의 통계적 접근법을 제안한다. Fisher Linear Discriminant(FLD)와 Average Neighborhood Margin Maximization(ANMM)의 피부색과 비피부색 클래스 내 분산 대비 클래스 간 분산의 비교를 통해 두 클래스 간 분리력 변화를 확인한다. 교사(Supervised) 이진 분류문제에 대하여 Small sample size(SSS) 문제, 가우시안 분포 가정의 문제, 최대 추출 가능 특징 수 제한 문제 등을 해결함과 동시에, 지역적 특성 학습 방법의 도입을 통해 피부색과 비피부색 간 분리력을 향상시킨다.

• Journal of Korean Physical Therapy Science
• /
• v.2 no.1
• /
• pp.405-411
• /
• 1995

The objective of this study was to find out the present status of the physio - therapeutic facilities in oriental hospitals The material were used in this study The literatures or annual reports of 15 oriental hospitals which present the status of input resources of physio-therapy departments and performances, Major findings of this study were as follows The average scale of input resource of physio-therapy departments are in difference among hospitals a) number of rooms : 4.5 in average(5.1 in university hospitals, 3.5 in other hospitals) b) size of therapeutic facility' area : $20.0m^{2}$ in average($19.3m^{2}$ in university hospitals, $20.3m^{2}$ in other hospitals) c) number of therapists : 8.6 in average(9.3 in university hospitals, 7.5 in other hospitals)

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.4
• /
• pp.16-22
• /
• 2013

This paper presents a method to analyze the voltage sag data obtained from monitoring systems. In order to establish effective countermeasures against voltage sag problems, an assessment of the system performance with respect to voltage sags is needed. Generally, the average annual sag frequency can be estimated by using the recorded voltage sag events for several years. However, the simple average value can not give the information about the errors of estimation. Such an average estimation is not useful for establishing effective solutions for voltage sag problems. Therefore, this paper proposes an effective method based on the Interval Estimation method. The estimation of voltage sag frequency is performed by using the average frequency and Poisson probability model. The proposed method can give the expected annual sag frequency and upper one-sided bound frequency.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.585-587
• /
• 2006

Generally, LPF(low pass filter) circuits are used for converting square wave to average value, but these are not used necessary for average value of square wave in real time because of time constant of LPF. This paper deals with acquiring method for average value of square wave in real tine in case of frequency of output voltage is fixed, waveform of output voltage is square wave and duty of output voltage is varied like as 1 quadrant or 4 quadrant chopper.

• Korean Journal of Crystallography
• /
• v.16 no.1
• /
• pp.1-5
• /
• 2005

The structure of the title compound has been determined by single-crystal X-ray diffraction work. The crystals are orthorhombic, space group $Pna2_1$ with a=11.095(3), b=21.834(7), c=12.574(4) $\AA$, and R1=0.0667. The average carbon bond length in aromaticity In the molecule is 1.386(1) $\AA$ and the average single bond length linking the central benEene ring and peripheral phenyl rings is 1.491(3) $\AA$. The average dihedral angle between the central benzene ring and each of six peripheral phenyl rings is $67.1(1)^{\circ}$ and the average dihedral angle between neighboring two phenyl rings is $55.0(1)^{\circ}$. Thus the molecule adopts a quasi-propeller configuration with approximate six-fold rotation symmetry.

• Journal of the Korean Ceramic Society
• /
• v.31 no.2
• /
• pp.161-170
• /
• 1994

For the preparation of short ceramic fibers of which average length might be in accordance with the opening size of sieve, e.g., 150${\mu}{\textrm}{m}$ or 300${\mu}{\textrm}{m}$, bulk fibers were grounded on sieve screen by applying both compressing and shearing force, and passed through the sieve screen. The grounded fibers were subjected to gravitational settling processes. The classified fibers were observed by scanning electron microscopy and the length of each fiber was measured to correlate the average length with the opening size of the sieve used for grinding bulk fibers. Theoretical analysis show that a free settling technique is ineffective for the classification of fibers by length compared with that of particles. The average lengths of classified fibers estimated by scanning electron microscopy were in good agreement with those obtained by relative packing volume of the fibers. Accordingly, it is confirmed that average fiber lengths can be determined from bulk volume data without photographing, counting and averaging results for hundreds of fibers.