• Communications for Statistical Applications and Methods
• /
• v.3 no.2
• /
• pp.151-159
• /
• 1996

The general formulas of average fraction inspected, average sample number and average outgoing quality in n-level skip-lot sampling plan are derived. Average sample number and average outgoing quality of a reference plan, three-level, five-level and ten-level skip-lot sampling plans are compared.

• Communications for Statistical Applications and Methods
• /
• v.8 no.2
• /
• pp.383-394
• /
• 2001

This paper is a generalization of single and two-level skip-lot sampling plans to n-level. On every skipping inspection of the n-level skip-lot sampling plan, not only the number of consecutive lots to be accepted but also the fraction of lots to be inspected can be freely choosed. The general formulas of the operating characteristic function, average fraction inspected, average sample number and average outgoing quality in n-level skip-lot sampling plan are derived. The operating characteristic curves, average sample number and average outgoing quality of a reference plan, two-level and five-level skip-lot sampling plans are compared.

• BMB Reports
• /
• v.29 no.4
• /
• pp.343-352
• /
• 1996

The biosynthesis of phospholipid and the composition of fatty acid were analyzed in mitochondria isolated from Chlorella ellipsoidea treated with carbon sources (glucose, sucrose, raffinose) during the culture. The growth of Chlorella and total lipid contents in mitochondria treated with various carbon sources was increased to compare with the control. When Chlorella mitochondria was treated with various carbon sources, four kinds of phospholipid were increased predominantly. The major fatty acids utilized for the biosynthesis of the phospholipid were analyzed linoleic acid (average 25.18%) and stearic acid (average 10.52%) in the control. But, it was shown that the major fatty acids in Chlorella mitochondria treated with glucose were stearic acid (average 30.93%), palmitic acid (average 17.47%) and stearic acid (average 20.31%), linoleic acid (average 16.68%) in sucrose treatment and oleic acid (average 17.17%), palmitic acid (average 15.64%) in raffinose treatment.

• Management & Information Systems Review
• /
• v.8
• /
• pp.45-60
• /
• 2002

Recognition reactions about business area activities of business ethics measurement before and after business ethics educations are as follows: 1. Relativism average in production ethics after education shows the high rates, and deontological theory average shows the low levels. These facts show that period characteristics to respect value diversities are reflected. 2. The high average of justice theory, utilitarianism, relativism in distribution ethics before and after education reflects that fair competitions and multitude happiness are preferred, and situation adaptations about the environment changes are preferred. The low average of egoism and justice theory shows that value systems of minorities are not preferred. 3. The high average of relativism in advertisement ethics before and after education reflects the period characteristics to respect value diversities, and low egoism average shows that ethics standards of examine objects are high. 4. Egoism average in selling ethics before education is high, but this average after education is low. These reflect the fact that business ethics educations are efficient.

• The Mathematical Education
• /
• v.57 no.3
• /
• pp.311-328
• /
• 2018

In school mathematics, the concept of an average is not a concept that is limited to a unit of statistics. In particular, high school students will learn about arithmetic mean and geometric mean in the process of learning absolute inequality. In calculus learning, the concept of average is involved when learning the concept of average speed. The arithmetic mean is the same as the procedure used when students mean the test scores. However, the procedure for obtaining the geometric mean differs from the procedure for the arithmetic mean. In addition, if the arithmetic mean and the geometric mean are the discrete quantity, then the mean rate of change or the average speed is different in that it considers continuous quantities. The average concept that students learn in school mathematics differs in the quantitative nature of procedures and objects. Nevertheless, it is not uncommon to find out how students construct various mathematical concepts into mathematical knowledge. This study focuses on this point and conducted the interviews of the students(three) in the second grade of high school. And the expression of students in the process of average concept formation in arithmetic mean, geometric mean, average speed. This study can be meaningful because it suggests practical examples to students about the assertion that various scholars should experience various properties possessed by the average. It is also meaningful that students are able to think about how to construct the mean conceptual properties inherent in terms such as geometric mean and mean speed in arithmetic mean concept through interview data.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.3
• /
• pp.83-92
• /
• 1998

Field experiment was performed from August 1996 to January 1998 to examine the applicability of constructed wetland system for wastewater treatment in rural area. The pilot plant was installed in Kon-Kuk University and the school building septic tank effluent was used as an influent to the treatment basin. Hydraulic loading rate was about 0.1 6$0.16^3/m^2$ day and theoretical detention time in the system was 1.38 days. The treatment basin was composed of sand and reed. The influent DO concentration was low and many cases close to zero, but effluent concentration was higher than the influent which implies that oxygen was supplied naturally. The average concentration of influent BOD was 126mg/L, and with average removal rate of 69 % the average effluent concentration was 4Omg/L which satisfied the effluent water quality standard for the system of interest. The average influent concentration of COD was 2Olmg/L and average effluent concentration was 75mg/L with average removal rate of 60%. The performance of BOD and COD tends to deteriorate in the low temperature, and appropriate action needs to be taken during the cold winter time for stable operation. The average influent concentration of SS was 5Omg/L, and effluent was 1 1mg/L with average removal rate of 76% which satisfied the effluent water quality standard for the system of interest. The results for the regulated components, SOD and SS, from the experiment showed that constructed wetland system can meet the effluent water quality standards. The average influent concentration of total phosphorus was 25.6mg/L and average effluent concentration was 7.8mg/L with average removal rate of 63%. Not like the performance of the above components, average nitrogen removal rate was only 11.2% which is not satisfactory. Although, nitrogen is not regulated at this moment, it can cause many environmental problems including eutrophication. Therefore, nitrogen removal efficiency should be improved for actual application. From the result of the field experiment, constructed wetland system was thought to be an appropriate alternative for wastewater treatment in rural area.

• Asian Journal of Turfgrass Science
• /
• v.10 no.3
• /
• pp.213-230
• /
• 1996

A study of occurrence and distribution of cellular slime molds(CSMs) in forest soils of central areas of Korea was carried out. Samples for CSMs isolation were collected from 4 study sites; Mt.Kyeryong, Mt. Taebaek, Mt. Sobaek and Mt. Sokri. In Mt. Kyeryong, six species were found. These were Dictyostelium fasciculatum, D.firmibasis, D. mucoroides, D. minutum, D. brefeldianum and Polysphondylium pallidum. The average number of species isolated at one site was 0.75, and average density(clones /g soil) was 292. The results of soil sample analyses were that the concentration of Pb was higher than any other areas. In Mt. Taebaek, seven species were found; D. fasciculatum, D.firmibasis, D. mucoroides, D. miuutum, P.pallidum. P. violaceum, P. candidum. The average number of species isolated at one site was 2.3,and average density was 1,108. Based on importance values calculated from study sites within each of three elevation ranges, several of the more widely distributed and abundant species have distribution patterns that show a response to elevation. In Mt. Sobaek, eleven species were found. These were D. fasciculatum. D.firmibasis, D. mucoroides, D. miuutum, D. brefeldianum, D. crassicaule,D. deminutivum, D. implicatum, P. pallidum. P. violaceum and P. candidum. The average number of species isolated at one site was 3, and average density was 793. Species diversity appeared to be the highest in this area. In Mt. Sokri, six species were found. These were D. fasciculatum. D. mucoroides, D. minutum, D. purpureum, P. pallidum. and P. violaceum. The average number of species isolated at one site was 2.4 and average density was 858. It was noticeable that D.purpureum were much more comrnonly found in this pinus evergreen forest. Key words: Cellular slime molds(CSMs), Importance value, Elevation, Average number of species, Average density.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.3
• /
• pp.120-127
• /
• 1998

In this paper, ultrasonic images of 25MHz bandwidth were acquired by applying peak value variation, time average and depth profile algorithm to acoustic microscopy and its performance was compared and analysed with each other. In the time average algorithm, total reflecting pulse wave from a spot on the coin was converted to digital data in time domain and average value of the converted 512 data was calculated in computer. Time average image was displayed by gray levels colour of acquired N x N matrix average data in the scanning area on the sample. This technique having smoothing effects in time domain make developed an ultrasonic image on a highly scattering area. In depth profile technique, time difference between the reference and the reflected signal was detected with minimum resolution performance of 2ns, thus we can acquired real 3 dimensional shape of the scanning area in accordance with relative magnitude. Through these experiments, peak value, time average and depth profile images were analysed and advantages of each algorithm were proposed.

• Journal of Environmental Science International
• /
• v.30 no.2
• /
• pp.185-189
• /
• 2021

This study was conducted to determine and to standardize the time of emergence of Protaetia brevitarsis adults, through four breeding experiments, including one which selected the dominant individuals of Protaetia brevitarsis. The breeding experiments were divided into two groups with hibernating and non-hibernating Protaetia brevitarsis by placing 100, 150, 200, 250 and 300 Protaetia brevitarsis in each breeding box (50 cm × 35 cm × 15 cm) filled with 12 L of fermented sawdust. Breeding tests were with four replicates each for 3 months. The test period was classified into four stages: Exp. 1 (Sep 1, 2019 to Nov 30, 2019), Exp. 2 (Dec 1, 2019 to Feb 29, 2020), Exp. 3 (Mar 1, 2019 to May 31, 2020) and Exp. 4 (Jun 1, 2020 to Aug 31, 2020). The survey items included average dead number, average emergence number, average mortality, and average emergence rate. In Exp. 1 and 2, the changes in Protaetia brevitarsis adults were similar. In Tables 1 and 2, the allegorical changes of adult white-spotted flowers were similar. In addition, the average dead number, average emergence number, average mortality, and average emergence rate showed better results in the hibernation state than in both Exp. 1 and 2. Exp. 3 and 4 showed a pattern of change different from the results of Exp. 1 and 2 and these characteristics were superior in the hibernation states compared to the non-hibernation states. In conclusion, this result was found to be most appropriate as a standardization of the emergence time of 200 Protaetia brevitarsis treatments through four breeding experiments in the hibernating state.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.3
• /
• pp.62-70
• /
• 2007

The purpose of this research is to suggest an improved method of how to apply and operate an average floor height system to rebuilt or redeveloped apartment buildings in general residential areas of Seoul. This research suggested two research findings by a computer simulation study for analyzing the difference between the average floor height of apartment buildings in experimental sites and the average of floors of buildings near experimental sites. The first finding is that an average floor height system should be applied to apartment buildings with a limitation of maximum height at sites larger than $12,000m^2$ in order to control the difference of the maximum height of buildings between apartment sites and their surroundings. The second finding is that the average floor height system should be operated by an appropriate average floor height ratio at sites greater than $50,000m^2$ in order to harmonize rebuilt or redeveloped apartment buildings with their surroundings.