• Journal of the Earthquake Engineering Society of Korea
• /
• v.23 no.3
• /
• pp.191-199
• /
• 2019

To calculate proper seismic design load and seismic design category, the exact site class for construction site is required. At present, the average shear-wave velocity for multi-layer soil deposits is calculated by the sum of shear-wave velocities without considering of vertical relationship of the strata. In this study, the transfer function for the multi-layered soil deposits was reviewed on the basis of the wave propagation theory. Also, the transfer function was accurately verified by the finite element model and the eigenvalue analysis. Three methods for site period estimation were evaluated. The sum of shear-wave velocities underestimated the average shear-wave velocities of 526 strata with large deviations. The equation of Mexican code overestimated the average shear-wave velocities. The equation of Japanese code well estimated the average shear-wave velocities with small deviation.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.401-407
• /
• 2004

This study is on the constant-current stress corrosion test related to the load stress in welded zone and non-welded zone of high tensile strength steel for natural gas transmission. The surface corrosion pattern of the welded zone of API 5L-X65 specimens for natural gas transmission showed global corrosion and narrow pitting, and the pitting was increased by increasing the load stress. Initially, the average relative electrode potential and the average relative current of the high tensile strength steel for natural gas transmission specimens was decreased suddenly, and the average relative electrode potential was higher and the average relative current was lower in welded zone than base metal. and the average relative electrode potential was decreased by increasing the load stress, and the average relative current was somewhat increased by increasing the load stress. The corrosion rate was less in welded zone than base metal, and the corrosion rate was decreased by increasing the load stress.

• International journal of advanced smart convergence
• /
• v.3 no.1
• /
• pp.20-24
• /
• 2014

To compare body signal, was designed the F-B function system on the body movement for the comfortable state. To detect subject of the normal state, was decided on the base of physical signal in the body movement. There are to detect the condition of Vision, Vestibular, Somatosensory and CNS. Vision condition was verified a variation of greater average (Vi-${\Phi}_{AVG-AVG}$) was presented slightly greater at $17.424{\pm}9.65$ unit. Vestibular condition was identified a variation of slightly greater average (Ve-${\Phi}_{AVG-AVG}$) was presented at $9.068{\pm}1.478$ unit. Somatosensory condition was checked a variation of smaller average (So-${\Phi}_{AVG-AVG}$) was presented slightly smaller at $2.79{\pm}0.419$ unit. CNS condition was confirmed a variation of diminutive smaller average (C-${\Phi}_{AVG-AVG}$) was presented slightly larger at $0.557{\pm}0.153$ unit. As the model depends on the F-B function system of body movement, average values of these perturbation were computed F-B function comparison data. These systems will be to infer a data algorithm and a data signal processing system for the evaluation of the stability.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.2
• /
• pp.21-26
• /
• 2005

From on the machining center cutting work of 5534, the characteristics such as spindle speed and feed speed fir the third point height, average spacing of roughness peaks, bearing ratio, center line average, ten point height. experiments is roughness for sampling length determine to measuring length of cutting feed speed 200, 400, 600, 800mm/min and spindle speed 800, 1000, 1200, 1400rpm. Third point height is spindle speed with most suitable cutting condition 1000rpm. Third point height is feed speed with most suitable cutting condition 400mm/min. Average spacing of roughness peaks are spindle speed with most suitable cutting condition feed speed increased to average spacing of roughness Peaks are increased. Spindle speed increased to average spacing of roughness peaks are decreased. Bearing ratio is spindle speed with feed speed increased to bearing ratio decreased. Center line average is spindle speed with most suitable cutting condition at 1200rpm feed speed with most suitable cutting condition at 200mm/min to cutting foe roughness suddenly decreased. Ten point height is spindle speed with most suitable cutting condition 1200rpm at ten point height cutting face roughness to decreased and feed speed with most suitable cutting condition 800mm/min at ten point height cutting face roughness to decreased.

• Journal of Biosystems Engineering
• /
• v.36 no.4
• /
• pp.252-256
• /
• 2011

Consumption of chicken feet has been increasing recently, thus it was necessary to produce good quality of bone less chicken feet. In the process of bone removal during chicken feet production, feeding, conveying, cutting and bone removing process takes about 90% of overall labor. Therefore, the development of a chicken feet-bone remover was necessary to reduce the cost of labor. There has been few research on the chicken feet bone removers so far in Korea as well as worldwide. So the main objective of this study was to develop a chicken feet-bone remover which is suitable for domestic circumstances. The average length of chicken feet was 113.3 mm with maximum and minimum lengths of 135.8 mm and 92.2 mm, and the average diameter of chicken leg was 12.5 mm, average width of the toe was 56.2 mm and the average weight of chicken feet was 26.4 g with maximum and minimum weight of 39.3 g and 16.9 g, respectively. Also, the average moisture content was 64.7% (w.b). The average cutting force of little toes was 15.6 N for the size ranges of less than 3.5 mm, 22.5 N, 3.5~6.0 mm and 30.3 N for larger than 6.0 mm in diameter, respectively.

• Journal of Nutrition and Health
• /
• v.22 no.3
• /
• pp.175-184
• /
• 1989

This survey was carried out to obtain the information concerning nutritional status, including factors of food intake and health condition of elderly women living in Ulsan city. Main results were as follows. 1) Dietary intake data showed the average daily intake of energy, protein, vitamin A, riboflavin and ascorbic acid were lower than Korean recommended dietary allowances (RDA). According to the percentage of RDA, Vitamin A was the nutrient found to be least sufficient. 2) Among the various influencial factors, pocket money, meal-mate, skip meal and health concern influenced on nutrient intake considerably. A meal condition score based on influencial factors, showed significant correlations with all nutrient intake(P<0.001). A health score based n the subjects complains about health condition, showed significant correlations with intake of energy, carbohydrate, thiamin, and niacin(P<0.05). 3) Average hight was below Korea reference, while average body weight of subjects was close to Korean reference. Average body mass index was 23.0. 4) The average systolic and diastolic blood pressure was 140mmHg/88mmHg, the proportion of hypertension was 32.4 percent. The average hemglobin concentration was 12.7g/dl, only 6.7 percent of subjects were anemic. Serum cholesterol concentration was normal range(140~220mg/dl) in all subjects.

• KCID journal
• /
• v.21 no.1
• /
• pp.55-63
• /
• 2014

A sedimentation basin for agricultural water quality improvement was researched to analyze the water quality purification characteristics. The sedimentation basin constructed at the inlet of Gamdon reservoir in Muan-gun, Jeollanam-do was selected as the research field of this study. The surface area of the sedimentation basin is $34,000m^2$, volume is $122,000m^3$, and hydraulic retention time is 0.3hr~7.3day. The average influent loading of SS was 156.6kg-SS/d, and the effluent loading was 67.5kg-SS/d with the average removal rate of 56.9%. The average influent loadings of BOD and COD were 33.0kg-BOD/d and 60.3kg-COD/d respectively, and the effluent loadings were 26.4kg-BOD/d and 48.6kg-COD/d with the average removal rate of 20.1% and 19.3% respectively. Therefore, the results of this study show that a sedimentation basin can purify SS and organic matters. The average influent loadings of T-N and T-P were 28.7kg-TN/d and 2.97kg-TP/d respectively, and the effluent loadings were 16.3kg-TN/d and 1.41kg-TP/d with the average removal rate of 43.0% and 52.6% respectively. In conclusion, the overall results of this study show that a sedimentation basin is a feasible alternative to purify organic matters and nutrients.

• Journal of Korean Society of Rural Planning
• /
• v.3 no.1
• /
• pp.23-32
• /
• 1997

The purpose of this study is to analyze structural and ecological characteristics of streams in rural village. The methods used in this study were measuring the section and surveying the vegetation of the stream at three points(upstream, inner village, downstream ) of 10 rural villages. The major findings of this study can be summarized as follows : 1) The average width of streams is 9 m, and the height of banks 3.1 m. the downstreams are the widest(average 10 m), and the inner-villages are the narrowest (average 8 m), and the slopes of basin are 7.33 %, 2.67 %, 1.39 % at upstream, inner-village, downstream respectively. 2) The downstreams are more contaminated than upstreams due to the sewage from the residents, especially livestock wastewater. 3) The dominant species in the streams are Persicaria thunbergii H. Gross (average Cover 17.76 %) and cumulus japonicas Sieb et. Zucc (average Cover 7.75 % ). 4) The average area covered by vegetation is 53.31 % the downstreams are covered 65.7 %, but inner-village area covered by vegetation is 46.6 %. 5) The problem found in this study are severe water contamination, poor accessibility to stream and poor vegetation of inner-village area, etc.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.1
• /
• pp.1-6
• /
• 2004

In preparing sodium alginates from sea tangle (Laminaria japonica) powder using the Mexican process, alkaline extraction, conversion to alginic acid and reversion to sodium alginates were used to increase purity. The effect of hot water treatment and dialysis on measuring the average molecular weight of sodium alginates were investigated. Intrinsic viscosity and average molecular weight of sodium alginates after dialysis were higher than those before dialysis. Average molecular weight of sodium alginates treated with hot water was higher than that without. Hot treatment has little effect on the ash content of sodium alginates. Ash content of sodium alginates before dialysis were $27-30\%$ those after dialysis were $10\%.$ After dialysis, Na content was highest $(89-91\%),$ K was $11-12\%,$ Ca was $1.9\%,$ and Mg was $0.05\%.$ Ash content of alginates had little effect on average molecular weight. SAV (slope of apparent viscosity) of alginates solution after dialysis showed higher values than before. SAV of the alginates with hot water treatment were higher than without treatment.

• Journal of Environmental Health Sciences
• /
• v.31 no.1
• /
• pp.94-98
• /
• 2005

This study was carried out to provide radon concentration and exposure in building. The average radon concentrations of building was measured 1.37 pCi/L in basement, 0.95 pCi/L in 1st layer, 0.74 pCi/L in 2nd layer, 0.56 pCi/L in 3rd layer, and 0.4 pCi/L in 4th layer, respectively. The average radon concentration of basement was measured the higher than any other stairs. Daily average distribution of radon concentrations in building shown that radon concentrations measured in morning at 8hr was the highest value. Monthly average distribution of radon concentrations shown 0.28 ${\pm}$ 0.17 pCi/L in April and 0.82 pCi/L in December that was the highest value. The average concentrations of radon was measured 0.38pCi/L in spring. 0.44 pCi/L in summer, 0.53 pCi/L in autumn, and 0.67 pCi/L in winter, respectively. This result shown that the average concentrations of radon in winter was the higher than any other seasons. That reasons was supposed that effect of number of exchanges and using air conditions was the higher in summer than winter.