• Microbiology and Biotechnology Letters
• /
• v.22 no.3
• /
• pp.296-303
• /
• 1994

An immobilized Trigonopsis variabilis cells having an high activity of D-amino acid oxidase(DAO) was used to convert CPC into GL-7-ACA. The optimal pH of the reaction system was 8.0-8.5, and the optimal temperature was 40$\circ$C. When immobilized cell was used repeatedly in semi-batchwise reaction, the system retained 80% of the initial activity after used of 12 times for over 12 hours. The storage stability of the immobilized cell was maintained for 30 days at 4$\circ$C. The CPC concentration for the maximal reaction rate was about 30 mM and 40 mM for free and immobilized cells, respectively. Substrate inhibition of CPC concentration more than 50 mM was overcomed by 20~25% by immobilization. Pure oxygen supply into reaction system was most efficient in D-amino acid oxidase reaction. Continuous conversion to GL-7-ACA from CPC has been developed with an bioreactor system containing immobilized T variabilis cells. By opera- tion of the reactor for 5 hours, the average conversion yield of >80% and GL-7-ACA production of 40~45 mM per hour could be obtained.

• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.304-310
• /
• 1998

Carbothermal reduction has been one of the important processes for the production of ceramic raw materials such as silicon carbide, silicon nitride, boron carbide, etc. The process has also been one of several trials for the recovery of ZnO from ZnO-containing waste. It usually involves two consecutive steps: the evolution of Zn vapor and its oxidation with air. In this study a ZnO-containing raw material is reduced by carbon at $1250^{\circ}C$ and the evolved Zn vapor is oxidized with air, resulting in fine powders of ZnO. computer programs, THERMO and PYROSIM developed by MINTEK, are used to simulate the process thermodynamically and the results are compared with the experimental results. It is shown that the ZnO-containing raw material can be reduced and can form fine ZnO with the yield as high as 98.7% under a proper condition. Based on these results, a process is engineered for the production of ZnO in a rotary kiln at a rate of 3 tons/day. The produced ZnO powders show properties suitable to the usual applications in ceramic industries with a purity of > 95wt% and an average particle size of ∼3${\mu}m$.

• YAKHAK HOEJI
• /
• v.45 no.6
• /
• pp.623-633
• /
• 2001

Various bupivacaine-loaded microspheres were prepared using poly(d,1-lactide) (PLA) and poly(d,1-lactic-co-glycolide) (PLGA) by a solvent evaporation method for the sustained release of drug. The effects of process conditions such as drug loading, polymer type and solvent type on the characteristics of microspheres were investigated. The prepared microspheres were characterized for their drug loading, size distribution, surface morphology and release kinetics. Drug loading efficiency and yield of PLGA micro- spheres were higher than those of PLA microspheres. The prepared microspheres had an average particle size below 5${\mu}{\textrm}{m}$. The particle size range of microspheres was 1.65~2.24${\mu}{\textrm}{m}$. As a result of SEM, the particle size of PLA microspheres was smaller than that of PLGA microspheres. In morphology studies, microspheres showed a spherical shape and smooth surface in all process conditions. In thermal analysis, bupivacaine-loaded microspheres showed no peaks originating from bupivacaine. This suggested that bupivacaine base was molecular-dispersed in the polymer matrix of microspheres. The release pattern of the drug from microspheres was evaluated for 96 hours. The initial burst release of bupivacaine base decreased with increasing the molecular weight of PLGA, and the drug from microspheres released slowly. In conclusion, bupivacaine-loaded microspheres were successfully prepared from poly(d,1-lactide) and poly (d,1- lactic-co-glycolide) polymers with different molecular weights allowing control of the release rate.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.273-280
• /
• 2014

The spectrum weighted responses of various detectors were calculated to provide guidance on the proper selection and use of survey instruments on the basis of their energy response characteristics on the neutron fields. To yield the spectrum weighted response, the detector response functions of 17 neutron-measuring devices were numerically folded with each of the produced calibration neutron spectra through the in-house developed software 'K-SWR'. The detectors' response functions were taken from the IAEA Technical Reports Series No. 403 (TRS-403). The reference neutron fields of 21 kinds with 2 spectra groups with different proportions of thermal and fast neutrons have been produced using neutrons from the $^{241}Am$-Be sources held in a graphite pile, a bare $^{241}Am$-Be source, and a DT neutron generator. Fluence-average energy ($E_{ave}$) varied from 3.8 MeV to 16.9 MeV, and the ambient-dose-equivalent rate [$H^*(10)/h$] varied from 0.99 to 16.5 mSv/h.

• Journal of the Korean Society of Tobacco Science
• /
• v.18 no.2
• /
• pp.126-131
• /
• 1996

In this study effects of isolation distance, transplanting time of maternal plants, and bagging of flower head with the gauze-cloth bag on the outcrossing of burley tobacco (Nicotiana tabacum L.) were investigated. Also the effect of fertilizer level and control of the number of capsules per plant on seed production and quality were examined. A male sterile line. produced 0.3 to 3.8 capsules Per plant when it was Planted with normally flowering tobacco with the average outcrossing of 7.2 plants, ranging from 2 to 18 out of 20 plants. With the farther the isolation distance between maternal plants and pollen donor plant, the lower the outcrossing occurred. Outcrossing occurred even at the isolation distance of 312 m. When the maternal plants were transplanted 35 days after transplanting the pollen donor ones, the outcrossed plants were not decreased significantly. The bagging of the flower head with the gauze-cloth bas (#0.9∼ 1.0 mm) decreased the outcrossed plants significantly, but couldn't prevent the outcrossing completely. The seed amount per plant was higher in the highly fertilized cultivation. The number of seed capsules per plant affected significantly on seed yield and quality. When the seed capsules was controlled by 30 or 50 capsules per plant, the weight of 1,000 seeds and germination rate were higher than those with 70 or 90 capsules per plant. Key words : Nicotiana tabacum, outcrossing, bagging.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.2
• /
• pp.157-163
• /
• 2000

An experimental study was conducted to evaluate the treatment efficiency of paper-mill wastewater using pure oxygen activated sludge process. Effects of hydraulic retention time (HRT) and organic loading on process performance and kinetics were investigated. The raw paper-mill wastewater(BOD concentration ${\leq}500mg/L$) and the effluent from dissolved air flotation(DAF) treatment(BOD concentration ${\geq}500mg/L$) were used as influent for pure oxygen activated sludge process. Average BOD removal efficiencies were above 89.3% under 6hours or longer of HRT, while under 3hours of HRT they decreased to about 82%. With the effluent from DAF process, the half saturation constants($K_S$) and the maximum specific substrate removal rate($K_{max}$) were 85 mg/L and 2.25 L/day, respectively. However, with the raw paper-mill wastewater, both $K_S$ and $K_{max}$ increased to 156 mg/L and 3.84 L/day, respectively. The microbial yield coefficient(Y) and the decay coefficient($K_d$) were 0.46 gVSS/gBOD and 0.03 L/day, respectively, with effluent from DAF process. While, Y and $K_d$ were 0.24 gVSS/gBOD and 0.035 L/day, respectively, with the raw paper-mill wastewater.

• Journal of Communications and Networks
• /
• v.9 no.2
• /
• pp.198-209
• /
• 2007

This paper provides a thorough study on shared segment protection (SSP) for mesh communication networks in the complete routing information scenario, where the integer linear program (ILP) in [1] is extended such that the following two constraints are well addressed: (a) The restoration time constraint for each connection request, and (b) the switching/merging capacity constraint at each node. A novel approach, called SSP algorithm, is developed to reduce the extremely high computation complexity in solving the ILP formulation. Basically, our approach is to derive a good approximation on the parameters in the ILP by referring to the result of solving the corresponding shared path protection (SPP) problem. Thus, the design space can be significantly reduced by eliminating some edges in the graphs. We will show in the simulation that with our approach, the optimality can be achieved in most of the cases. To verify the proposed formulation and investigate the performance impairment in terms of average cost and success rate by the additional two constraints, extensive simulation work has been conducted on three network topologies, in which SPP and shared link protection (SLP) are implemented for comparison. We will demonstrate that the proposed SSP algorithm can effectively and efficiently solve the survivable routing problem with constraints on restoration time and switching/merging capability of each node. The comparison among the three protection types further verifies that SSP can yield significant advantages over SPP and SLP without taking much computation time.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.5
• /
• pp.769-781
• /
• 2021

Given data about the annual fishery yield of the common squid Todarodes pacificus, and the catch-per-unit-effort (CPUE) data from multiple fisheries from 2000-2018, we applied a Bayesian state - space assessment model for the squid population. One of our objectives was to do a stock assessment, simultaneously incorporating CPUE data from the following three fisheries, (i) large trawl, (ii) jigger, and (iii) large purse seine, which comprised on average a year about 65% of all fisheries, allowing possible correlations to be reflected. Other objectives were to consider both observation and process errors and to apply objective priors of parameters. The estimated annual exploitable biomass was in the range of 3.50×10⁵ to 1.22×10⁶ MT, the estimated intrinsic growth rate was 1.02, and the estimated carrying capacity was 1,151,259 MT. Comparison with available results from stock assessment of independently analyzed single fisheries revealed a large difference from the estimated values, suggesting that stock assessment based on multiple fisheries should be performed.

• Microbiology and Biotechnology Letters
• /
• v.49 no.2
• /
• pp.249-254
• /
• 2021

The study of the impact of weather on viral respiratory infections enables the assignment of causality to disease outbreaks caused by climatic factors. A better understanding of the seasonal distribution of viruses may facilitate the development of potential treatment approaches and effective preventive strategies for respiratory viral infections. We analyzed the incidence of human mastadenovirus infection using real-time reverse transcription polymerase chain reaction in 9,010 test samples obtained from Cheonan, South Korea, and simultaneously collected the weather data from January 1, 2012, to December 31, 2018. We used the data collected on the infection frequency to detect seasonal patterns of human mastadenovirus prevalence, which were directly compared with local weather data obtained over the same period. Descriptive statistical analysis, frequency analysis, t-test, and binomial logistic regression analysis were performed to examine the relationship between weather, particulate matter, and human mastadenovirus infections. Patients under 10 years of age showed the highest mastadenovirus infection rates (89.78%) at an average monthly temperature of 18.2℃. Moreover, we observed a negative correlation between human mastadenovirus infection and temperature, wind chill, and air pressure. The obtained results indicate that climatic factors affect the rate of human mastadenovirus infection. Therefore, it may be possible to predict the instance when preventive strategies would yield the most effective results.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.4
• /
• pp.452-461
• /
• 1982

Average yield of wheat and barley cultivars has been increased 3 percent every year by varietal improvement. The major characteristic changes of those improved cultivars were the early maturing and lodging resistance using dwarf genes, 70-90cm of culm length appearances, under the heavy fertilizer application. Looking back the cultural practices of wheat and barley for the last 20 years, the introduction of early maturing and lodging resistance cultivars around 1970 brought the changes of seeding rate from 65kg to 130- 200kg per hector and the tillering increased by heavy fertilizer. The utilization of livestock and man power for preparation of seedbed were gradually disappeared by increasing agricultural mechanization. The narrow-spaced seeding $(40cm {\times} l8cm)$ and drill seeding $(20cm {\times} 5cm)$ in upland, broadcasting or drilling on high ridge $(120cm {\times} 90cm)$ with the power-toller and whole area broadcasting in paddy field were improved as the main cultural method. The use of agricultural machineries reduced the labour consumption of 940 man hours to 180 man hours per hector from seeding to harvest.