• 멤브레인
• /
• 제12권1호
• /
• pp.8-20
• /
• 2002

본 연구에서는 분리막의 일반적 역세척 방법이 아닌 질소 역세척을 하면서, 4종의 탄소계 관형 세라믹 한오여곽막으로 제지공장의 방류수를 처리하였을 때 역세척 주기 및 막간압력차 (TMP), 유량의 영향과 최적운 전조건을 규명하였다. 역세척시간 (BT)을 40초로 고정하였고, 정상운전시간 (FT)은 4~32분, TMP는 $1.0~3.0kg_f/cm^2$ 유속은 0.53~1.09cm/s로 변화시켰다. 또한 최적조건은 무차원 투과선속 ($J/J_0$) 및 총과여부부피 ($V_T$) 막오염에 의한 저항 ($R_f$)의 측면에서 고찰하였다. 그 결과 최적 역세척주기는 BT/FT=0.083 (FT=8분)으로 가장 빈번한 역세척 BT/FT=0.167 (FT=4분) 보다 오히려 많은 총여과부피를 얻을수 있었다. 한편, TMP가 증가할수록 구동력의 증가로 보다 많은 $V_T$를 얻을 수 있었고, 유량이 증가할수록 발생한 난류의 영향으로 막오염은 감소되고 투과유속은 증가하여 많은 $V_T$를 얻을수 있었다. 오염물질 제거율은 탁도 95% 이상, 호학적 산소요구량 ($COD_{Cr}$)45~83%로 높았으나 총용존고형물 (TDS)의 경우 10% 이하로 낮았다.

• Biomolecules & Therapeutics
• /
• 제6권2호
• /
• pp.213-218
• /
• 1998

A novel in situ-gelling and mucoadhesive acetaminophen liquid suppository was developed to improve the patient compliance of conventional solid suppository. In this study, acetaminophen liquid suppository, Likipe $n_{R}$, ［aminophen/Poloxamer 407/Poloxamer 188/so4ium alginate (5/15/19/0.6%)] with relation temperature at 30-36 "C and suitable gel strength and bioadhesive force, dissolution pattern similar to conventional solid type suppository, Suspe $n_{R}$, was developed. Furthermore, the bioequivalence of two acetaminophen products was evaluated in 16 normal male volunteers (age 22-27 yr, body weight 56-72 kg) following sidle rectal administration. Test product was Likipe $n_{R}$ suppository (Dong-Wha Pharm. Corp., Korea)and reference product was Suspe $n_{R}$204-212 suppository (Hanmi Pharm. Corp., Korea). Both products contain 125 mg of acetaminophen. Four Suppositories of the test and the reference product were administered to the volunteers, respectively, by randomized two period cross-over study (2$\times$2 Latin square method). The determination of acetaminophen was accomplished using HPLC. Average drug concentrations at each sampling time and pharmacokinetic parameters calculated were not significantly different between two products (p>0.05); the area under the curve to last sampling time (24 hr) (AU $Co_{-2}$4h/) (30.14$\pm$8.64 vs 27.98$\pm$ 6.53 $\mu$g .h/ml), maximum plasma concentration ( $C_{max}$) (3.29$\pm$0.87 vs 3.60$\pm$0.66 $\mu$g/ml) and time to maximum plasma concentration ( $T_{max}$) (2.91 $\pm$0.55 vs 2.69$\pm$0.60 h). The differences of mean AUCo $_{24h}$, C-a. and T-between the two products (7.18%, 9.58% and 7.53%, respectively) were less than 20%. The power (1-7) and treatment difference ($\Delta$) for AU $Co_{24h}$, $C_{max}$ and $T_{max}$ were more than 0.8 and less than 0.2, respectively at $\alpha$=0.1. The confidence limits for AU $Co_{24h}$, $C_{max}$ and $T_{max}$ (-0.81 ~13.55%, -1.56~ 17.60 and -3.81 ~18.87%, respectively) were less than $\pm$ 20% at $\alpha$=0.1. These results suggest that the bioavailability of Likipe $n_{R}$ suppository is not significantly different from that of Suspe $n_{R}$ suppsitory. Therefore, two products are bio-equivalent based on the current results.results.lts.sults.results.lts.

• 펄프종이기술
• /
• 제34권5호
• /
• pp.18-38
• /
• 2002

A previous study on the model coatings based on latex-bound plastic pigment coatings (1) has been extended to latex-bound No. 1 clay, ultra-fine ground calcium carbonate (UFGCC), and clay-carbonate pigment mixture coatings, which are being widely used in the paper industry. The latex binder used was a good film-forming, monodisperse S/B latex or 0.15$\mu\textrm{m}$. No. 1 clay was representative of plate-like pigment particles, whereas UFGCC was of somewhat rounded rhombohedral pigment particlel. Both of them had negatively skewed triangular particle size distributions having the mean particle suet of 0.7${\mu}{\textrm}{m}$ and 0.6$\mu\textrm{m}$, respectively. Their packing volumes were found to be 62.5% and 657%, respectively. while their critical pigment volume concentrations (CPVC's) were determined to be 52.7% and 50.5% ( average of 45% caused by the incompatibility and 55.9% extrapolated) by coating porosity, respectively. Each pigment/latex coating system has shown its unique relationship between coating properties and pigment concentrations, especially above its CPVC. Notably, the clay/latex coating system hat shown higher coating porosity than the UFGCC/latex system at high pigment concentrations above their respective CPVC's. It was also found that their coating porosity and gloss were inter-related to each other above the CPVC's, as predicted by the theory. More interestingly, the blends of these two pigments have shown unique rheological and coating properties which may explain why such pigment blends are widely used in the industry. These findings have suggested that the unique structure of clay coatings and the unique high-shear rheology of ground calcium carbonate coatings can be judiciously combined to achieve superior coatings. Importantly, the low-shear viscosity of the blends was indicative of their unique packing and coating structure, whereas their high-shear rheology was represented by a common mixing rule, i.e., a viscosity-averaging. Transmission and scanning electron and atomic force microscopes were used to probe the state of pigment / latex dispersions, coating surfaces, freeze fractured coating cross-sections, and coating surface topography. These microscopic studies complemented the above observations. In addition, the ratio, R, of CPVC/(Pigment Packing Volume) has been proposed as a measure of the binder efficiency for a given pigment or pigment mixtures or as a measure of binder-pigment interactions. Also, a mathematical model has been proposed to estimate the packing volumes of clay and ground calcium carbonate pigments with their respective particle size distributions. As well known in the particle packing, the narrower the particle size distributions, the lower the packing volumes and the greater the coating porosity, regardless of particle shapes.

• 펄프종이기술
• /
• 제34권5호
• /
• pp.1-17
• /
• 2002

The immobilization and consolidation of the model coatings based on the plastic pigment and latex binder of known particle sizes were theoretically Studied in terms of the dense random packing of binary spheres and varying extent of latex film shrinkage. The porosity of the model coatings was calculated based on three proposed latex shrinkage models: Maximum, Minimum, and Linearly Decreasing Latex Shrinkage. The increasing extent of latex shrinkage was calculated up to the critical pigment volume concentration(CPVC) as a function of plastic pigment volume fractions, and the maximum latex shrinkage was estimated from the CPVC. Also, the number of pores and the average equivalent spherical pore diameters were calculated based on those proposed models. The opacity and gloss of the model coatings on polyester films were measured and their porosity was also determined by a simple coat weight-thickness method. As expected, various coating structure-property-composition relationships, such as opacity, gloss, porosity, etc., were shown to exhibit sharp transitions near the CPVC. The CPVC values determined by the opacity, gloss, and porosity vs. PVC relationships, respectively, agreed very well with each other. Especially, the CPVC's determined by the opacity and porosity vs. PVC curves were identical. The comparison between the theoretically calculated and experimental porosity values showed that the intermediate value between the maximum and minimum latex shrinkage would best fit the experimental porosity data. The effect of plastic pigment particle size on the optical properties and porosity of model coatings was also studied and it was observed that the coating opacity and porosity increased with increasing plastic pigment particle size, but the gloss decreased. The ink gloss of the uncalendered model coatings applied onto commercial sheet offset coated papers was shown to be affected by both the coating gloss and porosity: the higher the coating gloss, the higher the ink gloss, but the higher the coating porosity, the lower the ink gloss. Their printability was also studied in terms of the number of passes-to-fail and the rate of ink setting as a function of both plastic pigment volume fractions and plastic pigment particle sizes. A minimum crack-free temperature(MCR) of latex-bound coatings was proposed to better predict the behaviors of latexes as coating binders. The wet state of model coating dispersions, the surfaces of consolidated model coatings, and their internal structure were examined by both electron and atomic force microscopy, and their micrographs were found to be consistent with our immobilization and consolidation models.

• 공업화학
• /
• 제30권5호
• /
• pp.597-605
• /
• 2019

수용성 접착제의 접착력을 향상시키기 위해 제미니형 비이온 반응성 계면활성제를 합성하여 수계 접착제에 적용하였다. 제미니형 비이온 반응성 계면활성제는 말레산 및 에틸렌옥사이드의 부가몰수가 다른 폴리 옥시 에틸렌 세틸 에테르를 사용하여 합성하였다. 합성된 계면활성제는 FT-IR 및 $^1H-NMR$에 의해 확인되었다. 합성된 화합물은 밝은 노란색 왁스의 형상이었고, 화합물의 운점은 $78^{\circ}C$ 이상이었다. 측정된 임계 미셀 농도(c.m.c)는 $1.0{\times}10^{-4}{\sim}7.0{\times}10^{-4}mol/L$이었고 표면장력은 25.9~32.0 mN/m이었다. 에틸렌옥사이드의 부가몰수가 증가함에 따라 유화력이 향상되었다. Ross-Miles 법에 의한 화합물의 발포 높이는 1.4~4.5 cm이었다. 본 연구에서 합성된 계면활성제는 수성 접착제의 유화 중합에서 유화제로 사용되었으며 그 물성을 평가하였다. 준비된 접착제의 고체 함량은 59%이었다. 접착제의 평균입자크기는 164~297 nm이었다. 접착제의 초기 점착성의 볼 번호는 20~32이었으며, 박리 강도는 $1.8{\sim}2.1kg_f/mm$이었다. 점도 유지율은 30 days 동안 99%로 확인되었다. 합성된 제미니형 비이온 반응성 계면활성제는 점착력을 위한 유화제로 사용될 것으로 기대된다.

• 보건행정학회지
• /
• 제29권3호
• /
• pp.303-311
• /
• 2019

Background: Cerebrovascular disease is included in four major diseases and is a disease that has high rates of prevalence and mortality around the world. Moreover, it is a disease that requires a high cost for long-term hospitalization and treatment. This study aims to figure out the correlation between grip strength, which was presented as a simple, cost-effective, and relevant predictor of cerebrovascular disease, and cerebrovascular disease based on the results of a prior study. And furthermore, our study compared model suitability of the model to measuring grip strength and relative grip strength as a predictor of cerebrovascular disease to improve the quality of cerebrovascular disease's predictor. Methods: This study conducted an analysis based on the generalized linear mixed model using the data from the Korea Longitudinal Study of Ageing from 2006 to 2016. The research subjects consisted of 9,132 middle old age people aged 45 years or older at baseline with no missing information of education level, gender, marital status, residential region, type of national health insurance, self-related health, smoking status, alcohol use, and economic activity. The grip strength was calculated the average which measured 4 times (both hands twice), and the relative grip force was divided by the body mass index as a variable considering the anthropometric figure that affects the cerebrovascular disease and the grip strength. Cerebrovascular diseases, a dependent variable, were investigated based on experiences diagnosed by doctors. Results: An analysis of the association between grip strength and found that about 0.972 (odds ratio [OR], 0.972; 95% confidence interval [CI], 0.963-0.981) was the incidence of cerebral vascular disease as grip strength increased by one unit increase and the association between relative grip strength and cerebrovascular disease found that about 0.418 (OR, 0.418; 95% CI, 0.342-0.511) was the incidence of cerebral vascular disease as relative grip strength increased by unit. In addition, the model suitability of the model for each grip strength and relative grip strength was 11,193 and 11,156, which means relative grip strength is the better application to the predictor of cerebrovascular diseases, irrespective of other variables. Conclusion: The results of this study need to be carefully examined and validated in applying relative grip strength to improve the quality of predictors of cerebrovascular diseases affecting high mortality and prevalence.

• 대한임상검사과학회지
• /
• 제51권1호
• /
• pp.93-104
• /
• 2019

본 연구는 국내의 진단검사의학과의 검사현황 및 인력배치현황과 검사 건수를 파악하기 위함이다. 지역별, 규모별 임상병리사를 대상으로 설문조사를 실시하여 최종 441부를 분석 자료로 사용하였다. 자료의 분석은 STATA (version 12.0)를 이용하여 Descriptive statistics analysis, Chi-square test, ANOVA test를 실시하였다. 병원 규모별 임상병리사 분포는 의원급 5.8명, 병원급 14.9명, 종합병원 25.8명, 대학병원 45.4명으로 나타났다. 부서별검사건수, 1인 1일 검사건수는 의원, 병원, 종합병원, 대학병원간의 유의한 차이가 있었다. 임상병리사의 1일 검사건수와 1일 적정 검사건수의 차이는 상급병원으로 갈수록 감소하는 것으로 나타났다. 정도관리는 상급병원의 부서별 정도관리 평균 시간은 2시간 이내로 나타났다. 급여만족도, 근무환경만족도, 검사성취도, 복지제도측면에서 의원, 병원급에서 불만족도 다수 차지하는 것으로 나타났다. 이는 선진국형 의료 수준에 맞는 신뢰성 있는 검사의 데이터를 제공하기 위해 임상 병리사의 근무환경에 따른 근무의 만족도와 임상검사의 정확도를 높이기 위해서라도 임상병리사의 처우개선에 초점을 맞추어야 할 것으로 사료된다.

• 터널과지하공간
• /
• 제28권6호
• /
• pp.609-619
• /
• 2018

주선풍기가 설치된 통기수갱이 굴착된 국내 석회석 광산에서 수행한 통기수갱의 통기효과 분석결과 자연통기 및 기계통기 효과가 뚜렷하게 나타났다. 수갱을 통하여 입기되는 자연통기량은 최대 $11.7m^3/s$이었으며 갱내 공기온도의 측정에 의하여 비교적 정확한 정량적 예측이 가능하였다. 선풍기 가동에 의한 배기 통기량은 $20.3{\sim}24.8m^3/s$로 통기량의 변동은 갱도내 장비의 이동에 의한 통기특성곡선의 상향이동에 따른 선풍기 운전점의 변화에 의한 결과이므로 통기저항의 저감 노력이 요구된다. 갱구로부터 수갱까지 총 1912 m 갱도내 난류확산계수는 $15m^2/s$, $18m^2/s$로 나타나 오염물질은 기류보다 상대적으로 빨리 확산되므로 공기질 제어를 위하여 신속한 배기가 요구된다. 따라서 통기용 수갱은 급격히 심부화 및 대형화되고 있는 국내석회석광산의 지속적 개발을 위한 필수적 갱내 환경제어 시설로 권장되어야할 것으로 판단된다.

• 한국터널지하공간학회 논문집
• /
• 제21권4호
• /
• pp.519-534
• /
• 2019

최근 국내 터널공사에서 낙반사고의 위험성이 낮고 진동과 소음이 적은 쉴드 TBM을 이용한 기계화 터널공법이 많이 적용되는 추세이며, 이러한 쉴드 TBM으로 터널 굴착 시 적절한 굴착속도를 설계하는 것이 무엇보다 중요하다. 본 연구에서는 ${\bigcirc}{\bigcirc}{\sim}{\bigcirc}{\bigcirc}$ 고속철도 쉴드 TBM 공사구간에 대하여 지반조사 결과와 TBM 굴진데이터를 분석하고 이를 기존 연구자들에 의해 제안된 경험적 굴착속도 예측방법에 적용하였다. 또한, 현장 굴진데이터 중 커터 당 추력과 지반 일축압축강도와의 상관관계를 분석하고 이를 통해 TBM 터널 설계 시 커터 당 추력과 일축압축강도를 변수로 굴착속도를 예측할 수 있는 간편 모델을 도출하였다. 기존 해외의 여러 굴착속도 예측 모델들을 해당 TBM 현장에 적용한 결과 예측치와 측정된 굴착속도는 약 50~500%의 비교적 큰 오차를 보인 반면, 본 연구에서 도출된 굴착속도 예측모델은 평균 약 15%의 오차율을 나타내어 추후 유사한 지반조건을 가진 쉴드 TBM 현장에 대해서 적용성이 높을 수 있을 것으로 기대한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권4호
• /
• pp.585-591
• /
• 2019

Objective: This study investigated carcass characteristics and meat quality of purebred Pakchong 5, crossbred pigs sired by Pakchong 5, and crossbred pigs sired by Duroc. Methods: Forty-eight pigs (average body weight of 22.25 kg) were composed of three groups as purebred Pakchong 5 (PP), Large $White{\times}Landrace$ pigs sired by Pakchong 5 (LWLRP), and Large $White{\times}Landrace$ pigs sired by Duroc (LWLRD). Each group consisted of eight gilts and eight barrows. At 109-day-raising period, pigs were slaughtered, and carcass characteristics were evaluated. Longissimus thoracis (LT) muscles from left side of carcasses were evaluated for meat quality and chemical composition. Data were analyzed using general linear model procedure, where group, sex, and their interaction were included in the model. Results: The PP had greater carcass, total lean, and ham percentages than crossbred pigs (p<0.05). LWLRP had thicker backfat and more carcass fat percentage than LWLRD (p<0.05). There were no differences (p>0.05) on cutting percentages from tender loin, loin, boston butt, and picnic shoulder among groups. The PP and LWLRP had larger loin eye area (LEA) than LWLRD (p<0.05). Gilts had more loin percentage and lower $L^*$ value than barrows (p<0.05). No meat color parameters ($L^*$, $a^*$, and $b^*$) were affected by groups (p>0.05). PP and LWLRP had larger muscle fiber diameters than LWLRD (p<0.05). However, water holding capacity, Warner-Bratzler shear force values, and chemical composition of LT were not affected by group or sex (p>0.05). Conclusion: Pakchong 5 purebred has good carcass and lean percentages. Compared to Duroc crossbred pigs, Pakchong 5 crossbreds have similar carcass and lean percentages, larger LEA, and slightly more carcass fat, with comparable meat quality and chemical composition. Pakchong 5 boars are more affordable for very small- to medium-scale pig producers.