• 대한금속재료학회지
• /
• 제49권1호
• /
• pp.85-91
• /
• 2011

Alnico magnets can be used as magnetic bearings for the precise electric power measuring instruments such as watt-hour meters because they have high remanence ($B_r$), relatively high maximum energy product ($(BH)_{max}$), and excellent temperature stability. In this study, Alnico composite magnets were fabricated by appropriately mixing alnico alloy powders with epoxy resin and binder. The Alnico powders mixed with epoxy resin and a hardening agent with a mixing ratio of 96:4 were pressed and then cured to be a toroid-type ring magnet with an outer diameter (${\Phi}_{out}$) of 15 mm, an inner diameter (${\Phi}_{in}$) of 6.5 mm and a thickness (t) of 2.5 mm, respectively. The magnetic properties of the Alnico ring magnets were varied with the mixing ratio of Alnico powders that possess different average particle sizes. The Alnico ring magnet prepared by mixing 5 wt% of $50{\mu}m$ (small size) powder, 15~20 wt% of $150{\mu}m$ (medium size) powder, and 75~80 wt% of $300{\mu}m$ (large size) powder showed the best magnetic properties (remanent induction, coercive force, maximum energy product, and surface flux density). In addition, measurements of temperature and moisture characteristics for the Alnico ring magnets showed that the surface flux densities of the N and S poles decreased little and the repulsive distance between the magnets decreased as small as 0.05 mm after 10 days.

• 한국표면공학회지
• /
• 제54권3호
• /
• pp.144-151
• /
• 2021

In the present work, planar-type ZnO powder of [0001] plane with a high aspect ratio range of 20:1 to 50:1 was synthesized. Ag or CuO could be coated on the planar-type ZnO powder by wet methods such as centrifugation or ball milling. During the coating, the average size of the powder was slightly increased while maintaining the shape and XRD pattern of ZnO. When Ag or CuO was coated, the absolute value of the zeta potential, as well as the concentration of oxygen vacancy, was increased. Ag or CuO coated planar-type ZnO power exhibited excellent antibacterial performance, which seems to be related to their high electrostatic attraction force. They could be made into a masterbatch by mixing with ABS resin, and their applicability to antibacterial substances was confirmed by manufacturing the caps of a keyboard.

• Journal of Ceramic Processing Research
• /
• 제20권6호
• /
• pp.589-596
• /
• 2019

Pigments with minute particle sizes, such as carbon black (CB) and pigment red 48:2 (P.R.48:2), are the most important types of pigment and have been widely used in many industrial applications. However, minute particles have large surface areas, high oil absorption and low surface energy. They therefore tend to be repellent to the vehicle and lose stability, resulting in significant increases in viscosity or reaggregation in the vehicle. Therefore, finding the best way to improve the dispersion properties of minute particle size pigments presents a major technical challenge. In this study, minute particle types of CB and P.R.48:2 were treated with nitrogen gas plasma generated via radio frequency-plasma enhanced chemical vapor deposition (RF-PECVD) to increase the dispersion properties of minute particles in deionized (DI) water. The morphologies and particle sizes of untreated and plasma treated particles were evaluated using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The average distributions of particle size were measured using a laser particle sizer. Fourier transform infrared spectroscopy was carried out on the samples to identify changes in molecular interactions during plasma processing. The results of our analysis indicate that N2 plasma treatment is an effective method for improving the dispersibility of minute particles of pigment in DI water.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2427-2434
• /
• 2022

Series of unequal quantity Nd/Ce co-doped ceramic nuclear waste forms, (Gd, Nd)₂(Zr, Ce)₂O₇, were prepared to tailor its ordered pyrochlore or disordered fluorite structure. The phase transition, microtopography, and elemental composition of the ceramic samples were systematically investigated, especially the effect of order-disorder structure on the chemical stability. It was confirmed that unequal quantity of Nd/Ce could synchronously replace the Gd/Zr-sites of Gd₂Zr₂O₇. And the phase transition of order-disorder structure could be successfully tailored by regulating the average cationic radius ratio of (Gd, Nd)₂(Zr, Ce)₂O₇ series. The elements of Gd, Nd, Zr, and Ce are uniformly distributed in the ordered or disordered structures. The MCC-1 leaching results showed that (Gd, Nd)₂(Zr, Ce)₂O₇ pyrochlore ceramic nuclear waste forms had excellent chemical stability, whose elements' normalized leaching rates were as low as 10^-4-10^-7 g·m^-2·d^-1 after 7 days. In particular, the chemical stability of disordered structure was superior to that of ordered structure. It was proposed that the force constant and the closest packing were changed with the structure transformation resulting the chemical stability difference.

• Wind and Structures
• /
• 제33권6호
• /
• pp.463-470
• /
• 2021

This study investigates the aerodynamic characteristics of NACA series airfoil by altering the trailing edge in the form of extended and serrated sections. This contemporary advent examined NACA 0020 airfoil experimentally at the angle of attack ranging from 0° to 45° and for the Reynolds number of 2.46 × 105. To figure out the flow behaviour, the standard average pressure distribution over the airfoil surface is estimated with 50 pressure taps. The time series surface pressure is recorded for 700 Hz of sampling frequency. The extended trailing edge of 0.1 c, 0.2 c and 0.3 c are attached to the base airfoil. Further, the triangular serration is introduced with the base length of 2 cm, 4 cm and 6 cm. Each base length with three different amplitudes of 0.1 c, 0.2 c and 0.3 c were designed and equipped with the baseline case at the trailing edge and tested. The aerodynamic force coefficient, as well as pressure coefficient are presented. The obtained data advises that modification in the trailing edge will reflect the aerodynamic characteristics and the flow behaviour over the section of a wing. Resultantly, the extended trailing edge as a thin elongated surface attached to a base airfoil without revising the main airfoil favors good lift increment. The serrated trailing edge acts as a flow control device by altering the flow pattern results to delay the stall phenomenon. Besides it, improves lift co-efficient with less amount of additional drag. This extended and serrated trailing edge approach can support for designing the future smart airfoil.

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.36-42
• /
• 2021

This study was conducted to analyze the effect of the gear specification and gear quality corresponding to the macro geometry on the gear transmission error. The two pairs of gears with large and small transmission errors were selected for calculation, and two pairs of gears were manufactured with different gear quality. The test gears were manufactured by two different gear specifications with ISO 5 and 8 gear quality, respectively. The transmission error measurement system consists of an input motor, reducer, encoders, gearbox, torque meter, and powder brake. To confirm the repeatability of the test results, repeatability was confirmed by performing three repetitions under all conditions, and the average value was used to compare the transmission error results. The transmission errors of the gears were analyzed and compared with the test results. When the gear quality was high, the transmission error was generally low depending on the load, and the load at which the decreasing transmission error phenomenon was completed was also lower. Even when the design transmission error according to the gear specification was different, the difference of the minimum transmission error was not large. The transmission error at the load larger than the minimum transmission error load increased to a slope similar to the slope of the analysis result.

• 디지털융복합연구
• /
• 제20권5호
• /
• pp.375-381
• /
• 2022

본 연구는 중국 30개 성시를 연구 대상으로 하여 정태적, 동태적 두 가지 각도에서 연구의 시발점으로 하였으며, DEA-BCC 모델과 Malmquist 지수를 사용하여 2011~2020년 중국 30개 성시의 환경 효율성을 산정하였다. 연구에 따르면 중국 30개 성시의 정태 환경 효율성은 평균 0.643으로 전국 범위에서 뚜렷한 차이를 보인다. Beijing, Shanghai는 환경 효율성이 유효하고 나머지 28개 성시는 모두 차원이 다른 비효율 상태를 가지고 있다. 구역발전에서도 차별성이 있어 전반적으로 동고서저형 공간 구도를 보인다. 전국 30개 성시의 환경 효율성인 Malmquist 지수는 상승하는 성장세를 보이며 기술진보가 주요한 추진력이 된다. 향후 정책에서는 동부지역의 방사선 견인능력을 높이고 각 구역 간 시너지를 강화하여 구역 우위를 충분히 발휘해야 할 것이다. 그리고 산업구조 최적화, 과학기술 수준 제고, 전국 환경 효율성의 상승을 견인하여 녹색 발전을 실현한다.

• Steel and Composite Structures
• /
• 제43권1호
• /
• pp.79-90
• /
• 2022

In this study, the dynamic behavior of functionally graded layered deep beams with viscoelastic core is investigated including the porosity effect. The material properties of functionally graded layers are assumed to vary continuously through thickness direction according to the power-law function. To investigate porosity effect in functionally graded layers, three different distribution models are considered. The viscoelastically cored deep beam is exposed to harmonic sinusoidal load. The composite beam is modeled based on plane stress assumption. The dynamic equations of motion of the composite beam are derived based on the Hamilton principle. Within the framework of the finite element method (FEM), 2D twelve -node plane element is exploited to discretize the space domain. The discretized finite element model is solved using the Newmark average acceleration technique. The validity of the developed procedure is demonstrated by comparing the obtained results and good agreement is detected. Parametric studies are conducted to demonstrate the applicability of the developed methodology to study and analyze the dynamic response of viscoelastically cored porous functionally graded deep beams. Effects of viscoelastic parameter, porosity parameter, graduation index on the dynamic behavior of porous functionally graded deep beams with viscoelastic core are investigated and discussed. Material damping and porosity have a significant effect on the forced vibration response under harmonic excitation force. Increasing the material viscosity parameters results in decreasing the vibrational amplitudes and increasing the vibration time period due to increasing damping effect. Obtained results are supportive for the design and manufacturing of such type of composite beam structures.

• Nutrition Research and Practice
• /
• 제16권3호
• /
• pp.354-365
• /
• 2022

BACKGROUND/OBJECTIVES: Understanding the mechanism of chewing and swallowing food is important when creating a proper diet for older adults. This study investigated whether texture-modified model foods can reduce the difference in chewing and swallowing parameters between healthy community-living young and older adults. SUBJECTS/METHODS: In total, 35 older and 20 young adults (mean age: 75 and 25 years, respectively), matched for sex and number of teeth, were recruited and their unstimulated salivation and tongue pressure were measured. Simultaneous assessment of chewing and swallowing characteristics was conducted using surface electromyography and a videofluoroscopic swallowing study while the participants ingested 8 g of model food with one to four levels of hardness. RESULTS: The average tongue pressure and salivation among older adults were 61% and 49.7%, respectively, of the corresponding values observed in young adults. The older adult group used significantly (P < 0.05) increased muscle force with more chewing cycles (P < 0.05) than the young adult group, which was maintained even when consuming foods with the lowest hardness, although without chewing. However, the age effect on oral processing time existed only for the hardest foods. Swallowing difficulties among older adults were demonstrated by the significant increase in vallecula aggregation time. The total food intake duration was significantly (P < 0.05) longer in older adults than in young adults, regardless of food hardness. CONCLUSIONS: There were measurable differences in the process of chewing and swallowing food between young and older adults, which can be improved with food hardness control. Adjusting food hardness may help food intake in healthy older adults.

• 아태비즈니스연구
• /
• 제12권2호
• /
• pp.187-203
• /
• 2021

Purpose - The purpose of this study is to analyze the effects of non-tariff barriers on the Free Trade Agreement. Currently, it has achieved significant export effects by signing free trade agreements with many countries in Korea. However, most countries have implemented non-tariff barriers to protect their industries. This study analyzes the effects of non-tariff barriers in counterpart countries that have signed a free trade agreement. Design/methodology/approach - For analysis, first, prior studies were summarized, and second, the current status of free trade agreements and non-tariff barriers were identified. And, based on the current situation, the relationship between non-tariff barriers and export volume was analyzed. The targets of analysis are the United States, China, and Vietnam, which are Korea's three largest exporters. As for non-tariff barriers, anti-dumping tariffs, countervailing tariffs, and emergency import restrictions were analyzed as import regulatory measures. Findings - In the case of the United States, it can be seen that the decline in textiles, steel and electronics sectors is even greater. In the case of China, it can be seen that exports declined after imposing non-tariff barriers in the steel sector. Finally, it can be seen that exports declined after Vietnam implemented a non-tariff barrier on the steel sector. It was found that non-tariff barriers offset the effects of the Free Trade Agreement. Research implications or Originality - Currently, Korea has free trade agreements with numerous countries. However, after the free trade agreement entered into force, the number of annual average import regulation investigations for Korean products is on the rise. In the end, the implementation of non-tariff barriers is offsetting the effects of free trade agreements. Therefore, when signing a free trade agreement, it is necessary to thoroughly prepare for import regulatory measures such as the insertion of provisions of non-tariff barriers.