• 정보보호학회논문지
• /
• 제24권6호
• /
• pp.1139-1145
• /
• 2014

지능형 서비스를 제공하는 로봇에서 특정 사람을 인지하거나 구별하는 인식 기술은 매우 중요하다. 기존 단일 거리 얼굴 영상을 학습으로 사용한 얼굴 인식 알고리즘은 원거리로 갈수록 얼굴 인식률이 떨어지는 문제점이 있다. 실제 거리별 얼굴 영상을 이용한 방법은 얼굴 인식률은 향상되지만, 사용자 협조가 요구되는 단점이 있다. 본 논문에서는 줌카메라를 통해 거리별 얼굴 영상을 획득하여 학습으로 사용하는 LDA 기반 원거리 얼굴 인식을 제안한다. 제안하는 방법은 기존 단일거리 얼굴 영상을 학습으로 이용한 방법에 비해 7.8% 향상된 성능을 보였고, 거리별 얼굴 영상을 학습으로 이용한 방법과 비교했을 때 8.0% 저하된 성능을 보였다. 그러나 거리별 얼굴 영상을 취득하기 위해 추가적인 시간과 사용자 협조가 요구되지 않는 장점이 있다.

• 한국콘텐츠학회논문지
• /
• 제7권4호
• /
• pp.49-55
• /
• 2007

최근 원격교육, 디지털 콘텐츠 및 IPTV를 포함한 멀티미디어 데이터를 다수의 수신자들에게 멀티캐스트 전송기술을 이용하여 전송하는 방법들에 대한 논의가 활발히 이루어지고 있다. 이를 위하여 크게 소스기반의 트리 구성과 센터 기반의 트리 구성 방식의 프로토콜이 제안되고 있으며, 특히 센터 기반의 트리 구성시 RP (Rendezvous Point) 라우터를 선정하기 위한 여러가지 알고리즘들이 제안되었다. 주요 알고리즘들에서는 RP와 멤버들사이의 최대거리, 평균거리 및 예측거리 등의 measure를 이용하여 이의 값들을 최소화하는 라우터를RP로 지정한다. 본 논문에서는 메시 네트워크 하에서 소스 및 멤버들이 랜덤하게 지정되는 상황을 가정하는 경우 효율적인 RP 선정 알고리즘을 제안한다.

• 설비공학논문집
• /
• 제12권1호
• /
• pp.59-66
• /
• 2000

In a previous paper, we have examined the effects of nozzle configuration and jet to jet spacing on the heat transfer of 1 row of circular water jets. In this paper, experiments have been conducted to obtain the effects of nozzle to target plate distances on the heat transfer of 1 row of 3 jets and 1 row of 5 jets. The nozzle configurations are Cone type, Reverse cone type and Vertical circular type. Nozzle to target plate distance H was varied from 16 mm(H/D=2) to 80mm(H/D=10). For fixed value of mass flow rate and nozzle to target plate distance, larger values of average Nusselt number were obtained for the smaller jet to jet spacing. For the array of water jets, the average heat transfer was decreased slightly with increasing nozzle to target plate distance at low jet velocity of $\textrm{V}_{o}$=3 m/s. However, except for $\textrm{V}_{o}$=8 m/s of 1 row of 5 jets, it was increased with increasing nozzle to target plate distance at high jet velocity of $\textrm{V}_{o}$$\geq$6m/s. We proposed to apply the nozzle configuration of maximum average heat transfer to each nozzle to target plate distance for 1 row of 3 jets, and, it was Reverse cone type nozzle for 1 row of 5 jets(Reynolds number$\geq$36000).

• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.63-68
• /
• 2017

본 논문에서는 거리계산 보정 알고리즘을 이용하여 거리 인식 측정을 LED 디밍제어를 통해 구현하였다. 원거리에서 측정되는 RSSI 값의 오차를 줄이기 위해 RSSI 평균 필터링과 Feedback 필터링에 대한 계산 값을 산출 적용시켰다. 평균 필터링을 통한 RSSI 값과 Feedback, 필터링의 계수 값을 0.5로 설정하여 측정한 RSSI 값이 일반적인 측정에 비해 최대 -61dBm에서 최소 -52.5dBm으로 약 -2dBm에서 -6dBm 정도로 불규칙하고 높은 값이 다소 감소하는 것을 확인하였다. 정확도 향상을 위한 거리계산 보정 알고리즘을 응용하였으며 이를 통하여 거리가 증가함에 따라 오차의 범위가 감소하는 것을 확인하였다. 최종적으로 RSSI 측정결과 필터링을 이용해 불안정한 신호를 보정하였으며, 오차 범위를 줄이기 위해 거리계산 보정 알고리즘을 적용 시행하였다. 또한 거리판별과 신호의 안정도를 표시하기 위해 LED로 RGB 색상을 구현하였다.

• 대한디지털의료영상학회논문지
• /
• 제12권2호
• /
• pp.119-125
• /
• 2010

In order to demonstrate the value of long-distance radiography, we have studied how distance affects images in chest frontal radiography and compared short-distance and long-distance images in chest lateral radiography. Cardiothoracic ratio(CTR %) of 50 patients with no disease in the chest(10 each at the age of 20~60) were evaluated in Supine AP(100 cm), Sitting AP(100 cm), Sitting AP(180 cm), and Erect PA(180 cm). In lateral radiography, we evaluated and compared left lateral radiography(100 cm and 180 cm) of the patients based on the horizontal maximum of the heart. The average value of CTR(%) were 0.48 in Erect PA(180 cm), 0.52 in Supine AP(100 cm), 0.50 in Sitting AP(100 cm), 0.49 in Sitting AP(180 cm), which were Supine AP(100 cm) > Sitting AP(100 cm) > Sitting AP(180 cm) > Erect PA(180 cm). The average value of Maximum transverse diameter of left of the cardiac(MLD), which showed how much axis of spine was slanted to the left, was 90.67 mm in Erect PA(180 cm), 103.92 mm in Supine AP(100 cm), 93.54 mm in Sitting(100 cm), 89.84 mm in Sitting AP(180 cm), 58.11 mm in the minimum value and 118.79 mm in the maximum value. The average value of Maximum transverse diameter of right side of the cardiac(MRD), which suggested how much axis of spine was slanted to the right, was 47.18 mm in Erect PA(180 cm), 48.12 mm in Supine AP(100 cm), 44.98 mm in Sitting AP(180 cm), and the minimum value 26.84 mm and the maximum value 65.30 mm. There was no standard method to calculate; therefore, the horizontal maximum of the heart was used for lateral radiography. The average value was 121.07 mm in 100 cm and 109.76 mm in 180 cm. Sitting AP(180 cm) among the types was closest to C-PA(180 cm). As a result, during C-AP radiography, long-distance radiography lessened shadow of the heart more than that of short distance, Sitting position more than Supine position.

• 한국산업융합학회 논문집
• /
• 제27권2_1호
• /
• pp.297-306
• /
• 2024

This study identified the power distance tendency of firefighters. Power distance propensity is one of the important organizational and cultural factors that influence the development of the organization. There is a big difference in the attitude of the members of the organization to perform their work according to the tendency of the distance of power. As a result of the main study, the overall level of power distance propensity of the subjects was 2.55 points on average. In particular, there was a significant difference in the propensity of power distance according to class (p<0.05). In the future, it is necessary to study the effect of job characteristics according to the rank of firefighters on the propensity to distance power. It is expected to form a positive organizational culture of the firefighting organization by utilizing the power distance tendency of the members of the organization.

• 제어로봇시스템학회논문지
• /
• 제13권7호
• /
• pp.711-717
• /
• 2007

Location information will become increasingly important for future Pervasive Computing applications. Location tracking system of a moving device can be classified into two types of architectures: an active mobile architecture and a passive mobile architecture. In the former, a mobile device actively transmits signals for estimating distances to listeners. In the latter, a mobile device listens signals from beacons passively. Although the passive architecture such as Cricket location system is inexpensive, easy to set up, and safe, it is less precise than the active one. In this paper, we present a passive location system using Cricket Mote sensors which use RF and ultrasonic signals to estimate distances. In order to improve accuracy of the passive system, the transmission speed of ultrasound was compensated according to air temperature at the moment. Upper and lower bounds of a distance estimation were set up through measuring minimum and maximum distances that ultrasonic signal can reach to. Distance estimations beyond the upper and the lower bounds were filtered off as errors in our scheme. With collecting distance estimation data at various locations and comparing each distance estimation with real distance respectively, we proposed an equation to compensate the deviation at each point. Equations for proposed algorithm were derived to calculate relative coordinates of a moving device. At indoor and outdoor tests, average location error and average location tracking period were 3.5 cm and 0.5 second, respectively, which outperformed Cricket location system of MIT.

• 한국멀티미디어학회논문지
• /
• 제11권6호
• /
• pp.764-776
• /
• 2008

Image identification is the process of checking whether the query image is the transformed version of the specific original image or not. In this paper, image identification method based on feature composition is proposed. Used features include color distance, texture information and average pixel intensity. We extract color characteristics using color distance and texture information by Modified Generalized Symmetry Transform as well as average intensity of each pixel as features. Individual feature is quantized adaptively to be used as bins of histogram. The histogram is normalized according to data type and it is used as the signature in comparing the query image with database images. In matching part, Manhattan distance is used for measuring distance between two signatures. To evaluate the performance of the proposed method, independent test and accuracy test are achieved. In independent test, 60,433 images are used to evaluate the ability of discrimination between different images. And 4,002 original images and its 29 transformed versions are used in accuracy test, which evaluate the ability that the proposed algorithm can find the original image correctly when some transforms was applied in original image. Experiment results show that the proposed identification method has good performance in accuracy test. And the proposed method is very useful in real environment because of its high accuracy and fast matching capacity.

• Archives of Plastic Surgery
• /
• 제35권6호
• /
• pp.663-668
• /
• 2008

Purpose: Pedicled transverse rectus abdominis myocutaneous(TRAM) flap has been a gold standard for breast reconstruction and one of surgical techniques preferred by many surgeons. The authors examined the course of deep epigastric artery focusing on distance from margins of rectus abdominis to pedicle and location of choke vessels to get minimal muscles during pedicled TRAM flap operation. Methods: Eleven rectus abdominis muscle from nine cadavers were used in this study. Rectus abdominis was separated from the cadavers, deep inferior and superior epigastric artery were isolated and then 8 anatomical landmarks in medial and lateral margins of rectus abdominis were designated. Distance to a pedicle meeting first horizontally was measured and vertical location from umbilicus to choke vessel was determined. In addition, 32 rectus abdominis images of 16 women(average age: 37.2 years old) from 64 channel abdomen dynamic computerized tomography were also examined with the same anatomical landmarks with those of cadavers. Results: Average distance from four landmarks on lateral margin of rectus abdominis to pedicle was 1.9 - 3.4cm and 1.8 - 3.8 cm on medial margin. Choke vessel was located between middle and inferior tendinous intersection in all cases and average distance between two tendinous intersection was 6.7 - 7.0 cm on medial margin and 6.2 cm on lateral margin. Location of inferior tendinous intersection was on umbilicus or superior of it in all cases and its average distance from umbilicus was 1.8 - 5.6 cm on medial margin and 2.7 - 6.2 cm on lateral margin. Conclusion: Distance from medial and lateral margins of rectus abdominis muscle to pedicle was the shortest in inferior tendinous intersection and that was averagely 1.8 cm on medial margin and 1.9 cm in average on lateral margin. All choke vessels were located between middle and inferior tendinous intersection.

• 사상체질의학회지
• /
• 제19권1호
• /
• pp.50-59
• /
• 2007

1. Objectives The Face is an important standard for the classification of Sasang Contitutions. Now We are developing 3D Automatic Face Recognition Apparatus to analyse the facial characteristics. This apparatus show us 3D image of man's face and measure facial figure. We should examine accuracy of position recognition in 3D Automatic Face Recognition Apparatus(3D-AFRA). 2. Methods We took a photograph of Face status with Land Mark by using 3D-AFRA. And We scanned Face status by using laser scanner(vivid 700). We analysed error average of distance between Facial Definition Points. We compare the average between using 3D-AFRA and using laser scanner. So We examined the accuracy of position recognition in 3D-AFRA at indirectly. 3. Results and Conclusions The error average of distance between Right Pupil and The Other Facial Definition Points is 0.5140mm and the error average of distance between Left Pupil and The Other Facial Definition Points is 0.5949mm in frontal image of face. The error average of distance between Left Pupil and The Other Facial Definition Points is 0.5308mm and the error average of distance between Left Tragion and The Other Facial Definition Points is 0.6529mm in laterall image of face. In conclusion, We assessed that accuracy of position recognition in 3D-AFRA is considerably good.