• 한국운동역학회지
• /
• 제22권4호
• /
• pp.421-428
• /
• 2012

The purpose of this study was to verify the effects of developed assisting wear which maximize trunk(back) muscle's stretch-shortening effect during backswing and downswing for increasing golf ball carrying distance. Design and fabrication of assistive wear were performed based on the results of analyzed data of trunk EMG activity from the golf drive swings of elite professional male golfers during back swing and downswing phases. After the prototype of wear was produced, surface EMG and Flight scope tests were conducted to verify the effectiveness of the wear for increasing distance to the professional golfers. Results indicated that wearing trial showed significant longer carry distance than the non-wearing trial(p<.001). The carry distance of wearing trial showed an average 229 m compared to the non-wearing trial, the average 225 m. The swing with wearing also produced significantly faster ball speed than the trial without wearing(p<.05). Average 245 Km/h and 244 Km/h were produced for the swing with and without wearing trails, respectively. EMG results also indicated that the muscle activity of left psoas was significantly increased for wearing trial during downswing and near the impact. Thus, this may affect positively to increase club head speed. The activity of the left latissimus dorsi was dramatically increased during the final stage of swing. This generates elongation effect for longer follow-through and increased impulse between club and ball so eventually valid assistance to increase carry distance. Therefore, the developed assisting wear was proved to be effective tool for increasing golf ball carry distance with maximizing trunk(back) muscle's stretch-shortening effect during backswing and downswing.

• 한국가스학회지
• /
• 제1권1호
• /
• pp.73-80
• /
• 1997

본 연구는 화학장치설비중 저장탱크에서 누출된 유해독성가스인 염소의 풍하거리에 따른 10분 평균, 30분 평균 및 1시간 평균 최대 지표면 농도를 산출하여 염소가스의 법적 규제농도인 IDLH 및 ERPG-3 농도들과 비교함으로써 유해위험거리 (hazard distance) 또는 독성완충거리 (toxic buffer distance)를 정량적으로 예측하는 분산모델링 방법론을 개발하고자 수행되었다. 본 분산모델링을 위하여 누출원모델, 분산모델, 기상 및 지형자료들 이 SuperChems 모델에 입력자료로 사용되었으며, 대기의 안정도, 풍속, 표면거칠기 길이의 변화에 따른 지표면 농도의 영향이 평가되었다.

• 한국세라믹학회지
• /
• 제23권5호
• /
• pp.25-34
• /
• 1986

This study was to refined the crystal structure of solid solution to determine the position and amount of Al in diopside and to relate crystal structure changes and properties of solid solution. Single crystals of the solid solution in the system CaO.MgO.$2 SiO_2-Al_2O_3$ were made from the melt with slow cooling and used to refine the structure. The following were obtained. 1. Tetrahedra rotated around axis parallel to the direction which the angle 03-03-03 became small. 2. Tetrahedron became large and regular. Average T-O bond distance increased 0.53 percent. 3. M1 octahedron became small and average M1-O bond distance decreased 1.1 percent. 4, M2 polyhedron became small and average M2-O bond distance decreased 0.37 percent Polythedron was affected not so much compared with any cation site. 5. Distance between metal ions distances between T and oxygens which were coordinated with M2 and meighboring tetrahedron distances between M2 and oxygens which coordinated with M1 and M2 were not changed almost. 6. $Al^{3+}$ substituted 4Mg^{2+}$ and $Si^{4+}$

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제16권3호
• /
• pp.390-395
• /
• 1994

The author evaluated the nasal asymmetry after primary operations in the patients with unilateral cleft lip using full face photographs. The results are as follows : 1. Nasal deviation angle is average 2.98+3.01 degree(ranged from 0 to 10 degree), significantly different from control group(p<0.05). 2. Nasal deviation angle is average 5.1% when inter-medial canthal distance is 100%, significantly different from control group(p<0.05). 3. Difference in nostril size between cleft and noncleft side is 2.1% when inter-medial canthal distance is 100%, significantly different from control group(p<0.05). 4. Nasal attractiveness analysis shows higher points in difference in nostril size, nasal deviation, nasal form in that order. 5. Nasal asymmetry after primary operations in the patients with unilateral cleft lip using full face photographs is related with Nasal deviation angle, Nasal deviation distance and Difference in nostril size between cleft and noncleft side.

• 산업경영시스템학회지
• /
• 제34권4호
• /
• pp.1-10
• /
• 2011

This paper addresses the analysis of the travel distance and order picking time of the vehicle in a aisle when items are picked by the batch in a warehouse system. Batching is to combine several orders in a single tour of the storage/retrieval machine. An advantage of batching is that the length of a tour for a batch of orders is shorter than the sum of the individual orders' tour lengths. The average travel distance and order picking time when a batch is picked in a aisle of the warehouse systems are analyzed for the batch size. And when the vehicle is idle, the dwell point of the vehicle to minimize to the response distance is analyzed. As the batch size is increased, average order picking time per item is decreased. The problem is analyzed and a numerical example is showed to explain the problem.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권5호
• /
• pp.2414-2433
• /
• 2019

The aim of this paper is to design a 3D laser radar prototype based on laser triangulation. The mathematical model of distance sensitivity is deduced; a pixel-distance conversion formula is discussed and used to complete 3D scanning. The center position extraction algorithm of the spot is proposed, and the error of the linear laser, camera distortion and installation are corrected by using the proposed weighted average algorithm. Finally, the three-dimensional analytic computational algorithm is given to transform the measured distance into point cloud data. The experimental results show that this 3D laser radar can accomplish the 3D object scanning and the environment 3D reconstruction task. In addition, the experiment result proves that the product of the camera focal length and the baseline length is the key factor to influence measurement accuracy.

• 한국산림과학회지
• /
• 제81권2호
• /
• pp.139-145
• /
• 1992

본(本) 연구(硏究)는 강원대학교(江原大學校) 임과대학부속(林科大學附屬) 연습림(演習林)의 제(第)2임반(林班)을 대상으로 수치지형도(數値地形圖)를 이용, 임도개설목적(林道開設目的)에 따른 4개의 평가인자(評價因子), 즉 최단임도개설장(最短林道開設長), 평균집재거리(平均集材距離), 개발지수(開發指數) 및 집재불능지점수(集材不能地點數)의 비율(比率) 등을 설정하여 각각의 평가인자(評價因子)에 적합한 최적임도노선(最適林道路線)의 배치계획(配置計劃)에 대하여 검토하였다. 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 최단임도개설장(最短林道開設長)에 의한 노선배치(路線配置)는 총연장(總延長) 6035.6m, 임도밀도(林道密度) 12.73m/ha, 평균집재거리(平均集材距離) 279.9m, 개발지수(開發指數) 1.43, 집재불능지점수(集材不能地點數)의 비율(比率)15.7% 이다. 2. 평균집재거리(平均集材距離)에 의한 노선배치(路線配置)는 총연장(總延長) 7828.501, 임도밀도(林道密度) 16.52m/ha, 평균집재거리(平均集材距離) 198.4m, 개발지수(開發指數) 1.31, 집재불능지점수(集材不能地點數)의 비율(比率) 4.0%이다. 3. 개발지수(開發指數)에 의한 임도노선배치(林道路線配置)는 총연장(總延長) 7410.6m, 임도밀도(林道密度) 15.64m/ha, 평균집재거리(平均集材距離) 210.9m, 개발지수(開發指數) 1.26, 집재불능지점수(集材不能地點數)의 비율(比率) 5.0%이다. 4. 집재불능지점수(集材不能地點數)의 비율(比率)에 의한 임도노선배치(林道路線配置)는 총연장(總延長) 8307.1m, 임도밀도(林道密度) 17.53m/ha, 평균집재거리(平均集材距離) 184.9m, 개발지수(開發指數) 1.29, 집재불능지점수(集材不能地點數)의 비율(比率) 2.5%이다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제23권2호
• /
• pp.63-67
• /
• 2000

The purpose of this study is to survey the present status of portable radiography and the result of free space scattered dose rate when taking a radiography at the general hospital or the university hospital in Taejon city. The results were as follows; 1. The number of cases using portable radiography for three years increased to averages 16.2%, 7.7% per year from January 1st in 1996 to December 31st in 1998. 2. The average of distance of adjacent patients was 219.1 cm at the ward. 3. For portable chest radiography, the free space scattered dose rate was 10.5 mSv/hr at 50 cm distance, 1.8 mSv/hr at 100 cm distance, and 0.2 mSv/hr at 200 cm distance. Therefore, in case of portable chest radiography at the ward, the average of distance of adjacent patients is 219.1 cm, so it does not have influence on the adjacent patients. But during the portable radiography, a guardian who is close to the patient, doctor, nurse and radiologic technologists has to set up the shield to prevent from the unnecessary radiation or the distance should be as great as possible from the mobile X-ray equipment.

• 한국발생생물학회지:발생과생식
• /
• 제23권2호
• /
• pp.193-198
• /
• 2019

Genomic DNA samples were obtained from cultured penaeid shrimp (Penaeus chinensis) individuals such as fresh shrimp population (FSP) and deceased shrimp population (DSP) from Shinan regions in the Korean peninsula. In this study, 233 loci were identified in the FSP shrimp population and 162 in the DSP shrimp population: 33 specific loci (14.2%) in the FSP shrimp population and 42 (25.9%) in the DSP population. A total of 66 (an average of 9.4 per primer) were observed in DSP shrimp population, whereas 55 unique loci to each population (an average of 7.9 per primer) in the FSP shrimp population. The Hierarchical dendrogram extended by the seven oligonucleotides primers indicates three genetic clusters: cluster 1 (FRESH 01, 02, and DECEASED 12, 13, 15, 16, 17, 19, 20, 22) and cluster 2 (FRESH 03, 04, 05, 06, 07, 08, 09, 10, 11, and DECEASED 14, 18, 21). Among the twenty-two shrimp, the shortest genetic distance that exposed significant molecular differences was between individuals 20 and 16 from the DSP shrimp population (genetic distance=0.071), while the longest genetic distance among the twenty-two individuals that established significant molecular differences was between individuals FRESH no. 02 and FRESH no. 04 (genetic distance=0.477). In due course, PCR analysis has revealed the significant genetic distance among two penaeid shrimp populations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권3호
• /
• pp.932-951
• /
• 2021

The effectiveness of testing in Model-based Testing (MBT) for Software Product Line (SPL) can be achieved by considering fault detection in test case. The lack of fault consideration caused test case in test suite to be listed randomly. Test Case Prioritization (TCP) is one of regression techniques that is adaptively capable to detect faults as early as possible by reordering test cases based on fault detection rate. However, there is a lack of studies that measured faults in MBT for SPL. This paper proposes a Test Case Prioritization (TCP) approach based on dissimilarity and string based distance called Last Minimal for Local Maximal Distance (LM-LMD) with Dice-Jaro-Winkler Dissimilarity. LM-LMD with Dice-Jaro-Winkler Dissimilarity adopts Local Maximum Distance as the prioritization algorithm and Dice-Jaro-Winkler similarity measure to evaluate distance among test cases. This work is based on the test case generated from statechart in Software Product Line (SPL) domain context. Our results are promising as LM-LMD with Dice-Jaro-Winkler Dissimilarity outperformed the original Local Maximum Distance, Global Maximum Distance and Enhanced All-yes Configuration algorithm in terms of Average Fault Detection Rate (APFD) and average prioritization time.