• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.4
• /
• pp.1-13
• /
• 2003

For spatial free vibration of non-symmetric thin-walled curved beams with shear deformation, an improved formulation is proposed in the present study. The elastic strain and the kinetic energies are first derived by considering constant curvature and shear deformation effects due to shear forces and restrained warping torsion. Next equilibrium equations and force-deformation relations are obtained using a stationary condition of total potential energy. And the finite element procedures are developed by using isoparametric curved beam element with arbitray thin-walled sections. Particularly not only shear deformation and thickness-curvature effects on vibration behaviors of curved beams but also mode transition and crossover phenomena with change in curvatures of beams are parametrically investigated. In order to illustrate the accuracy and the reliability of this study, various numerical solutions for spatial free vibration are compared with results by available references and ABAQUS's shell element.

• Structural Engineering and Mechanics
• /
• v.73 no.5
• /
• pp.529-542
• /
• 2020

As limited well-documented experimental data are available for assessing the attributes of different deformation components of flanged walls, few appropriate models have been established for predicting the inelastic responses of flanged walls, especially those of asymmetrical flanged walls. This study presents the experimental results for three large-scale T-shaped reinforced concrete walls and examines the variations in the flexural, shear, and sliding components of deformation with the total deformation over the entire loading process. Based on the observed deformation behavior, a simple model based on moment-curvature analysis is established to estimate flexural deformations, in which the changes in plastic hinge length are considered and the deformations due to strain penetration are modeled individually. Based on the similar gross shapes of the curvature and shear strain distributions over the wall height, a proportional relationship is established between shear displacement and flexural rotation. By integrating the deformations due to flexure, shear, and strain penetration, a new load-deformation analytical model is proposed for flexure-dominant flanged walls. The proposed model provides engineers with a simple, accurate modeling tool appropriate for routine design work that can be applied to flexural walls with arbitrary sections and is capable of determining displacements at any position over the wall height. By further simplifying the analytical model, a simple procedure for estimating the ultimate displacement capacity of flanged walls is proposed, which will be valuable for performance-based seismic designs and seismic capacity evaluations.

• Membrane Journal
• /
• v.31 no.5
• /
• pp.304-314
• /
• 2021

Climate change results in unusual weather pattern and affects annual rain fall severely. At the same time, growing industrialization leads to higher energy demand and leakage from petrochemical industry and tanker leads to water pollution. In this scenario, finding out solution to generate clean water is highly essential. For oil/water separation, there are several methods available such as chemical precipitation and adsorption but membrane separation technique is considered to be a more cost and energy efficient process. Amphiphilicity nature of membrane are enhanced by making composite membrane with 2D material such as MXene, resulting in good electrical conductivity and hydrophilicity. This review is mainly classified into two sections: pure MXene and modified MXene. A variety of polymer is used to prepare composite membranes and MXene is modified to further enhance the properties suitable for particular applications.

• Imaging Science in Dentistry
• /
• v.49 no.2
• /
• pp.97-102
• /
• 2019

Purpose: This study was conducted to evaluate the effect of different spatial resolutions of a photostimulable phosphor plate (PSP) radiography system on the detection of proximal caries lesions. Materials and Methods: Forty-five extracted human permanent teeth were radiographed using a PSP system (VistaScan Perio Plus) and scanned at the 4 resolutions (10 lp/mm, 20 lp/mm, 25 lp/mm, and 40 lp/mm) available in the system. Three independent examiners scored the images for the presence and absence of proximal caries lesions using a 5-point scale. The presence or absence of caries was confirmed by histological sections of the examined teeth (defined as the gold standard). Intra- and inter-observer reproducibility was calculated by the weighted kappa test. One-way analysis of variance with the post hoc Tukey test was used to compare the area under the receiver operating characteristic curve for the classifications made with each resolution. Results: For the detection of enamel lesions, the spatial resolution of 10 lp/mm was significantly superior to the other resolutions. However, the spatial resolution did not affect the detection of caries lesions in dentin (P>0.05). Conclusion: Spatial resolution may influence the accuracy of the detection of incipient caries lesions in radiographs with PSP plates. Images with low spatial resolution seem to be more appropriate for this purpose.

• The Journal of Pediatrics of Korean Medicine
• /
• v.33 no.4
• /
• pp.60-73
• /
• 2019

Objectives This study reviewed the effects of a combined treatment with Kampo and Western medicine for Developmental disability in Japan, and the provision of education programs in clinical care. Methods The search database includes J-STAGE. To narrow the search, the following key words were used: 'pervasive developmental disorders, Attention-Deficit/Hyperactivity Disorder, Learning Disorders or Learning Disabilities, Intellectual Disability, and Kampo'. The search was limited to the publication date from 2001 to 2019. Results 1. Japan analyzed five sections: The usage of the Kampo medicine ranges from 25.2% to 71.6%, and the Kampo medicine was highly used in large cities. 2. In Japan, the educational programs were provided for the caregiver and special educational programs were available for children with disabilities. 3. In Japan, there were 9 studies regarding developmental disability treating with herbal remedies. There were seven clinical trial reports, and two were published in a review or report form. 4. The results showed benefits of using Kampo for patients with lack of Yin in blood in treatment of developmental disorder. It is also important to control the liver qi and Yin in blood. 5. Seven papers reported no side effects or abnormal findings. They have reduced the use of antipsychotics. Conclusions These review studies in regards to the combined treatment of Kampo and Western medicines can be helpful to improve long term side effects of the antipsychotics used in developmental disorders.

• Fashion & Textile Research Journal
• /
• v.25 no.5
• /
• pp.651-660
• /
• 2023

This study aimed to research the local production of conductive composite yarn, a source material used in textile-type electrodes and circuits. The physical properties of an internationally available conductive composite yarn were analyzed. To manufacture the conductive composite yarn, we selected one type of conductive yarn with Ag-coated polyamide of 150d 1 ply, along with two types of polyethylene terephthalate (PET) with circular and triangular cross-sections, both with 150d 1 ply. The conductive composite yarn samples were manufactured at 250, 500, 750, and 1000 turns per meter (TPM). For both conductive composite yarn samples manufactured from two types of PET filaments, the twist contraction rate of the sample with a triangular cross-section was stable. Among the samples, the tensile strength of the sample manufactured at 750 TPM was the highest at approximately 4.1gf/d; the overall linear resistance was approximately 5.0 Ω/cm, which is within the target range. It was confirmed that the triangular cross-section sample manufactured with 750 TPM had a similar linear resistance value to the advanced product despite the increase in the number of twists. In future studies, we plan tomanufacture samples by varying the twist conditions to derive the optimal conductive yarn suitable for smartwear and smart textile manufacturing conditions.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.4
• /
• pp.100-109
• /
• 2012

Large road construction projects are typically partitioned into sections that are then contracted individually to contractors. Each section requires using similar heavy equipment including excavators, dump trucks and pavers, which constitute the highest cost. Normally the equipment is not shared between them, as each contractor wishes to have their equipment readily available. However, such practices result in very low utilization of these equipment. The goal of this research is to develop a programmatic resource sharing system in which contractors can share equipment depending on the changing needs of a multi-sectioned road project. This paper introduces the results of a survey performed to investigate how contractors currently manage the supply and demand of equipment and the equipment that are practical for sharing across a project. More importantly, the paper describes a set of metrics (DPR, nDPR, SDI) needed to quantify the amount of supply/demand variance occurring in each section. The metrics were used on an actual road construction project, and the results show that each section suffers from an imbalance between its monthly planned and actual utilization of equipment. The results also indicate that the sharing of the equipment can lead to potentially large savings as equipment requirements can be met within a project as to short leasing from outside vendors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2511-2519
• /
• 2015

In maritime logistics, the technology for transmitting status information has been greatly developed, but it has not been available in general logistics environment or it is impossible to support two-way communication as it simply receives and transfers a container's information. In particular, to support two-way communication in all sections of the global maritime logistics, the address value, which can identify the tag, should be managed. In this context, to improve the 433 MHz-based RFID, the project called "DASH 7" has been conducted in recent years. However, it has stopped proceeding because of its slow progress, including the standardization and development of references. In this paper, we introduced an active IP-RFID system configuration for real-time communication in global maritime logistics using a two-way communication-which is characteristic of an IP-applying virtual address values in the RFID tag, and proposing its process and function. When you apply the IP-RFID system proposed in this paper, not only real-time status tracking in the maritime logistics area is possible, but it is also applicable for controlling the tag.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.1029-1036
• /
• 2014

Several types of automatic 3D scanners are available for use in the 3D scanning industry, e.g., an automatic 3D scanner that uses a robot arm and one that uses an automatic rotary table. Specifically, these scanners are used to obtain a 3D shape using automatic assisting devices. Most of these scanners are required to perform numerous operations, such as merging, aligning, trimming, and filling holes. We are interested in developing an automatic 3D shape collection device using a spherical-coordinate-based guiding system. Then, the aim of the present study is to design an automatic guiding system that can automatically collect 3D shape data. We develop a 3D model of this system and measuring data which are collected by a personal computer. An optimal design of this system and the geometrical accuracy of the measured data are both evaluated using 3D modeling software. The developed system is then applied to an object having a highly complex shape and manifold sections. Our simulation results demonstrate that the developed system collects higher-quality 3D data than the conventional method.

• Journal of Environmental Impact Assessment
• /
• v.16 no.6
• /
• pp.511-524
• /
• 2007

Korea has 30 years of experiences in environmental impact assessment (EIA). Although EIA includes sanitation-public health factor, considering health impacts, among 74 unit projects of 17 sections, health impacts haven't been properly considered or have been ignored in many cases. The increasing awareness on the importance of health impacts has triggered this study to seek an optimal introduction scheme of health impact assessment (HIA). The processes of EIA already include screening, scoping, analysis, impact assessment, consultation, document review, decision making and monitoring, in which they would be the essential parts of HIA. In this context, integrating HIA into the existing EIA process could be the most effective way to use the benefits in both legal and procedural processes existed and to avoid the confusion and overlapping since the close relationships between environment and health impacts might be. Furthermore, it is desirable that the existing sanitation-public health factor should be substituted by and extended to environment-health factor with sufficient determinants to properly consider health impacts. When considering the first step of HIA, the prospective and qualitative approach is suitable more than the retrospective and quantitative one due to the lack of database accumulated. Similarly, an approach based on epidemiology and toxicology could analyze the limited evidences and impacts related to human disease, whereas one based on socio-science and psychology could provide the effective means available for predicting how the people and community will act by the change of surroundings. Checklist approach with various and comprehensive health determinants focused on prospective and qualitative methods will be very useful for more convenient and progressive dissemination of HIA. Various checklist approaches of toolkits could be found from HIA documents elsewhere, for example Westminster Toolkit, and they would be helpful to figure out how to develop common procedures and health determinants for checklist, in which the unique characteristics on korean cultural and political context compared to abroad should be carefully considered since checklist would be the most basic and essential part of HIA. After the establishment of checklist and procedural processes, the pilot projects should be conducted. Main purpose of pilot projects is to apparently prove the effectiveness and profitability of HIA. Pilot projects should be implemented to decide the effectiveness and suitability of HIA for future projects, programs and policies, and should be provided as the positive cases that can be achieved through the proper implementation and progress.