• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.1
• /
• pp.65-75
• /
• 2004

The enhancement of C2(Command and Control) system will increase effectiveness of individual force power in combat engagement. Especially, available time of a given engaging force and information accuracy are the most influencing factors to increment of combat effectiveness after enhancement of C2 system. In this paper, by using Schutzer's C2 Theory and Measures of Effectiveness, we developed several analytical functions representing the relationships between C2 system enhancement and two most critical variables, available time and information accuracy. As a result of functional analysis, we showed C2 system enhancement and combat effectiveness have positive and non-linear relationship. The higher level of C2 system be required, the better combat effectiveness of force power can be obtained. Additionally, we proposed a proposition that the combat effectiveness of C2 system is more sensitive to available time than to information accuracy, which might be very important issue for further research in this field.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.333-336
• /
• 2015

Recently, the power load is growing larger and because of the environmental limitation of generation, the expansion of generation facilities are becoming more difficult. For that reason the importance of the demand-side resources come to be higher. One method of the demand-side resource, the DLC Program, has executed, and moreover, the loads which are available to be controlled are increasing. It should be considered of some kinds of power system components such as DLCs, because the fact that using the demand resources will be an important part of the power system. This paper considers the power factor of the load-bus which is shedded in the direct load control program. and then analyze the power system using flow sensitivity and voltage sensitivity. In this paper, we assumed two scenarios through the rank of the load power factor at each bus and to compare and evaluate each case, we used Power World for the simulation.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1019-1022
• /
• 2003

This paper has proposed a 4- bit 20MHz Flash A/D converter design available analog signal processing and realized its intergrated circuit. The parallel comparison method A/D converter quantized analog signals swiftly using various converters. Also this theme has designed economic power dissipation circuit using a preamplifier of low volt & power CMOS comparator. Also the system was fabricated by Hynix 0.35um CMOS process.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.6
• /
• pp.916-926
• /
• 1994

A high frequency and soft-switched AC-to-DC rectifier employing a series-type resonant circuit is proposed to overcome the disadvantages of the conventional peak-rectifying circuit. Using the proposed rectifier, the high power factor and low harmonic currents are obtained in the AC line. Furthermore, several advantages such as the high power density and wide output voltage range can be available. Through the simulation and experimental results, the usefulness of the proposed rectifier is verified.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.350-355
• /
• 2011

The hot gas reingestion phenomenon of helicopter brings about the reduction of engine power available around in-ground. The phenomenon will vary for the conditions of ambient conditions and engine exhaust gas, the flow field associated with the downwash effect of main rotor. To verify the amount of hot gas reingestion to intake, Tests(Wind tunnel test, Flight test) or CFD could be available. At this study, the reingestion around in-ground would be predicted by numerical analysis(CFD).

• 전기의세계
• /
• v.23 no.1
• /
• pp.73-78
• /
• 1974

Digital simulation algorithms and program for multimachine dynamic stability have been developed which represent the effects of machines much more complety than have been available previously. Emphasis is given to the savings of the memory spaces required, thus making it possible to use a small computer with limited capacity of core storage (without auxiliary storage). Both d- and q- aris quantities are fully represented, and the speed-governing and voltage-regulating system available are ertensive, thus allowing a very close approximation to any physical system. Facilities for dynamic and nonlinear loads are also included. The computational algorithms and program developed have been shown to be extensive and complete, and are very desirable features minimizing memory spaces for stability calculations. The capabilities have been demonstrated by several case studies for an actual power system of 44 generators, 22 loads and 33 buses. About 13-K words of memory spaces have been required for the case studies on the basis of two words per real variable and a word per integer variable.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.659-662
• /
• 2006

Plant industry is very important industry that dominate 70% of standard foreign countries construction acceptance an order woe 2004 years. Technique of plant industry is state that secure part equipment connection detailed design and construction class' competitive power. But, high added value creation among plant industry need technique elevation because available plan, basic design technology is insufficient. Therefore, high added value creation wishes to present problem of standard code and improvement direction for plant design to improve available plan, basic design technology competitive power.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.117-120
• /
• 2003

PON (Passive Optical Network) is an emerging local subscriber access architecture that provides more bandwidth and services to subscriber than DSL (Digital Subscriber Line and HFC (Hybrid-Fiber Coaxial) network. A PON is a point-to-multipoint optical network with no active elements in the signals' path from source to destination. Advantages of using PON for a subscriber access network include large coverage area, reduced fiber deployment, multicast and broadcast capabilities, reduced cost of maintenance (due to devices being passive), and ease of upgrades to higher bit rate or additional wavelengths. PON uses WDM (Wavelength Division Multiplexing) technique that transmits the downstream and upstream data at each different wavelength. For transmitting the CATV (Community Antenna television) service through PON network, we give out additional wavelength. This study shows the available TPS (Triple play service) architecture using CATV overlay EPON (Ethernet PON) architecture and analyzes the effects of EPON-based CATV transmission by measuring the power loss fur each wavelength and the power range of the available analog wavelength and RF.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.61-63
• /
• 2005

Utility interactive photovoltaic systems is one of the most premising applications of photovoltaic systems. These systems are employed in applications where utility service is already available. In this case, there is no need for battery storage because utility power may be used to supplement photovoltaic systems when the load exceeds available PV generation. The load receives electricity from both the photovoltaic array and the utility inter-tied. In this paper, Principle and operating characteristic of Utility Interconnected Photovoltaic System is presented. For the purpose of optimal utility Inter-tied photovoltaic system design and installation. It is that demonstrate throughout the installed 3 PV system respectively, 3kW utility interconnected residential system.

• Journal of KIISE:Information Networking
• /
• v.32 no.2
• /
• pp.215-219
• /
• 2005

Generally, the mobile nodes in MANET have the limited power capacity available for actual communications. Thus, the power management is very important for packet routing or forwarding. Although MTPR, MBCR and MMBCR are proposed to treat the problem of power consumption, there have been few researches resolving the link breakdown that is occurred by the power exhaustion during transmission. In this sense, the reliable scheme should be required to ensure the routing connectivity. In this paper, we propose three schemes to enforce the routing connectivity. If the signal strength is dropped below a signal threshold, the candidate route is previously selected to prepare the link breakdown. Also, on multi-channel, we propose the lifetime increment scheme of a node that it manage its available power to the needed power of a new link. The simulation results show the enforcement of the link connectivity and the performance improvements of the delay time through the effective connection management.