• Journal of Life Science
• /
• v.26 no.4
• /
• pp.439-445
• /
• 2016

Soybean leaves, a Korean edible plant material, have been reported to prevent the development of osteoporosis and breast cancer. Based on this rational, soybean fallen leaves ethanolic extract (SBFL) was used for the experiment of cell invasion related to metastasis and antioxidant activity. The effect of SBFL on matrix metalloproteinases (MMPs) in human fibrosarcoma cells, HT1080 as well as its anti-oxidant activity was investigated in this study. The effect of SBFL on scavenging activity of reactive oxygen species was evaluated in vitro using lipid peroxidation assay,DPPH radical and reducing power assay. SBFL showed the positive effects on antioxidant activity, compared with vitamin C and vitamin E used as positive controls. Furthermore, SBFL showed cytotoxicity above 16 µg/ml in MTT assay. In particular, it was found that SBFL decreased the activation of MMP-9 stimulated by phorbol 12-myristate 13-acetae (PMA) and phenazine methosulfate (PMS). SBFL treatment increased the expression levels of p-FoxO-1 and SOD-1. Moreover, SBFL inhibited cell invasion stimulated by vascular endothelial growth Factor (VEGF). These results indicate that SBFL could inhibit cell invasion related to the activation of MMP-9 and oxidative stress, suggesting that it could be available as a main ingredient for prevention of metastasis.

• Journal of Life Science
• /
• v.28 no.8
• /
• pp.908-916
• /
• 2018

Hair loses melanin with aging, which leads to hair graying. The change in hair color is caused by a reduction in tyrosinase activity and an accumulation of hydrogen peroxide ($H_2O_2$) in hair follicles. The purpose of this study was to investigate the effect of ethanolic extract of Oryza sativa (OREE) on melanin production and antioxidative activity in B16F1 cells. In this study, OREE showed low DPPH radical scavenging activity and reducing power. However, it displayed a strong antioxidative effect against intracellular $H_2O_2$ in live cells. OREE did not inhibit DOPA oxidation activity in vitro, but it increased tyrosinase activity at a concentration of $64{\mu}g/ml$. OREE at a concentration higher than $32{\mu}g/ml$ showed cell toxicity in B16F1 cells. However, OREE at a concentration higher than $8{\mu}g/ml$ not only increased melanin synthesis in a dose-dependent manner in B16F1 cells but also increased melanin synthesis in cells treated with $H_2O_2$ inhibiting melanin synthesis. To confirm the effect of OREE on melanin production, Western blot analysis was performed. The results revealed that OREE increased the expression levels of tyrosine hydroxylase and tyrosinase-related protein-2 (TRP-2) involved in melanin production in the $H_2O_2$-treated cells in which melanin production was inhibited. The findings suggest that OREE could improve melanin synthesis and be available for development of hair cosmetics aimed at improving melanin production.

• Microbiology and Biotechnology Letters
• /
• v.37 no.2
• /
• pp.133-139
• /
• 2009

Yam (Dioscorea batatas Decne) has been recognized as healthy food due to its various biological activities, such as anti-obesity, anti-constipation, anti-proliferation, anti-mutagenic activity, and decrease of blood glucose and cholesterol level. In this study, the methanol extract and its organic solvent fractions were prepared from dried Dioscorea batatas Decne, and their antimicrobial, antithrombin, and antioxidant activity were evaluated, respectively. The 66.7% of methanol extract was fractioned into water residue, and most of total-polyphenol/total-flavonoids were found in ethylacetate fraction. This ethylacetate fraction at $500\;{\mu}g/disc$ concentration showed strong antibacterial activity against gram-negative and gram-positive bacteria, except Staphylococcus aureus. Antifungal activity was not observed in methanol extract and its fractions. But, strong antithrombin activity was found in methanol extract. At 4.8 mg/mL concentration, thrombin time was 99.5 sec, which is coincides with 30% activity of aspirin, a commercial available antithrombosis agent. The ethylacetate fraction showed strong DPPH scavenging activity ($IC_{50}$ of $80.5\;{\mu}g/mL$), compared to vitamin C ($IC_{50}$ of $15.2\;{\mu}g/mL$). Also, the ethylacetate fraction showed strong SOD-like activity and reducing power, which are coincide with 43% of vitamin C and 82.7% of butylated hydroxytoluene activity, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.8 no.1
• /
• pp.17-36
• /
• 1984

Since 1973, the competition on the development of fuel saving type internal combustion engines has become severe by the two times oil shock, and new type engines are reported every several months. Whenever these new type engines are developed, new designs are required and they will be offered in the market after performing the endurance test for a long time. But the engine market is faced with a heavy burden of finance, as the developing of a new engine requires tremendous expenses. For this reason, the computer simulation method has been lately developed to cope with it. The computer simulation method can be available to perform the reasonable research works by the theoretical analysis before carrying out practical experiments. With these processes, the developing expenses are cut down and the period of development is curtailed. The object of this study is the development of simulation computer program for the small naturally aspirated four-stroke diesel engine which is intended to product by the original design of our country. The process of simulation is firstly investigated for the ideal engine cycle, and secondly for the real engine cycle. In the ideal engine cycle, each step of the cycle is simulated by the energy balance according to the first law of thermodynamics, and then the engine performance is calculated. In the real cycle imulation program, the injection rate, the preparation rate and the combustion rate of fuel and the heat transfer through the wall of combustion chamber are considered. In this case, the injection rate is supposed as constant through the crank angle interval of injection and the combustion rate is calculated by the Whitehouse-Way equation and the heat transfer is calculated by the Annand's equation. The simulated values are compared with measured values of the YANMAR NS90(C) engine and Mitsubishi 4D30 engine, and the following conclusions are drawn. 1. The heat loss by the exhaust gas is well agree with each other in the lower load, but the measured value is greater than the calculated value in the higher load. The maximum error rate is about 15% in the full load. 2. The calculated quantity of heat transfer to the cooling water is greater than the measured value. The maximum error rate is about 11.8%. 3. The mean effective pressure, the fuel consumption, the power and the torque are well agree with each other. The maximum error is occurred in the fuel consumption, and its error rate is about 7%. From the above remarks, it may be concluded that the prediction of the engine performance is possibly by using the developed program, although the program needs to reform by adding the simulation of intake and exhaust process and assumping more reliable mechanical efficiency, volumetric efficiency, preparation rate and combustion rate.

• Journal of Korea Water Resources Association
• /
• v.37 no.12
• /
• pp.1019-1032
• /
• 2004

Flood frequency estimate is an essential index for determining the scale of small and middle hydraulic structure. However, this flood quantity could not be estimated directly for practical design purpose due to the lack of available flood data, and indirect method like design rainfall-runoff method have been used for the estimation of design flood. To give the good explain for design flood estimates, regional flood frequency analysis was performed by flood index method in this study. First, annual maximum series were constructed by using the collected data which covers from Japanese imperialism period to 1999. Wakeby distribution recommended by WMO(1989) was used for regional flood frequency analysis and L-moment method by Hosking (1990) was used for parameter estimation. For the homogeneity of region, the discordance and heterogeneity test by Hosking and Wallis(1993) was carried for 4 major watersheds in Korea. Physical independent variable correlated with index flood was watershed area. The relationship between specific discharge and watershed area showed a type of power function, i.e. the specific discharge decreases as watershed area increases. So flood quantity according to watershed area and return period was presented for each watershed(Han rivet, Nakdong river, Geum river and Youngsan/Seomjin river) by using this relation type. This result was also compared with the result of point frequency analysis and its regionalization. It was shown that the dam construction couldn't largely affect the variation of peak flood. The property of this study was also examined by comparison with previous studies.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.4
• /
• pp.417-424
• /
• 2010

The purpose of this study was to detect significant SNPs for carcass quality traits using DNA chips of high SNP density in Hanwoo populations. Carcass data of two hundred and eighty nine steers sired by 30 Korean proven sires were collected from two regions; the Hanwoo Improvement Center of National Agricultural Cooperative Federation in Seosan, Chungnam province and the commercial farms in Gyeongbuk province. The steers in Seosan were born between spring and fall of 2006 and those in Gyeonbuk between falls of 2004 and 2005. The former steers were slaughtered at approximately 24 months, while the latter steers were fed six months longer before slaughter. Among the 55,074 SNPs in the Illumina bovine 50K chip, a total of 32,756 available SNPs were selected for whole genome association study. After adjusting for the effects of sire, region and slaughter age, phenotypes were regressed on each SNP using a simple linear regression model. For the significance threshold, 0.1% point-wise p value from F distribution was used for each SNP test. Among the significant SNPs for a trait, the best set of SNP markers were selected using a stepwise regression procedure, and inclusion and exclusion of each SNP out of the model was determined at the p<0.001 level. A total of 118 SNPs were detected; 15, 20, 22, 28, 20, and 13 SNPs for final weight before slaughter, carcass weight, backfat thickness, weight index, longissimus dorsi muscle area, and marbling score, respectively. Among the significant SNPs, the best set of 44 SNPs was determined by stepwise regression procedures with 7, 9, 6, 9, 7, and 6 SNPs for the respective traits. Each set of SNPs per trait explained 20-40% of phenotypic variance. The number of detected SNPs per trait was not great in whole genome association tests, suggesting additional phenotype and genotype data are required to get more power to detect the trait-related SNPs with high accuracy for estimation of the SNP effect. These SNP markers could be applied to commercial Hanwoo populations via marker-assisted selection to verify the SNP effects and to improve genetic potentials in successive generations of the Hanwoo populations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.12
• /
• pp.1175-1183
• /
• 2013

Even if some CFD software developers and its users think that a state-of-the-art CFD software can be used to reasonably solve at least single-phase nuclear reactor safety problems, there remain limitations and uncertainties in the calculation result. From a regulatory perspective, the Korea Institute of Nuclear Safety (KINS) is presently conducting the performance assessment of commercial CFD software for nuclear reactor safety problems. In this study, to examine the prediction performance of commercial CFD software with the porous model in the analysis of the scale-down APR (Advanced Power Reactor Plus) internal flow, a simulation was conducted with the on-board numerical models in ANSYS CFX R.14 and FLUENT R.14. It was concluded that depending on the CFD software, the internal flow distribution of the scale-down APR was locally somewhat different. Although there was a limitation in estimating the prediction performance of the commercial CFD software owing to the limited amount of measured data, CFX R.14 showed more reasonable prediction results in comparison with FLUENT R.14. Meanwhile, owing to the difference in discretization methodology, FLUENT R.14 required more computational memory than CFX R.14 for the same grid system. Therefore, the CFD software suitable to the available computational resource should be selected for massively parallel computations.

• Journal of Chest Surgery
• /
• v.18 no.2
• /
• pp.182-192
• /
• 1985

[here are so many reports that pulsatile blood flow provides physiologic organ perfusions during cardiopulmonary bypass. So, we compared the recent 30 cases undergoing cardiac surgery by Cobe-Stckert pulsatile roller pump with another 30 cases by Polystan nonpulsatile roller pump. Pulsatile flow was applied during aortic-cross clamping period when synchronized to internal EKG simulator, and perfusion mode was changed to continuous nonpulsatile flow after declamping of aorta. Age, sex, weight, and disease entities were comparable and operative techniques were similar between two groups. 1. There were no differences in average ACC time, ECC time, and Operation time. 2. Postoperative artificial respiration time was 6hrs 30mins in nonpulsatile group and 4hrs 48mins in pulsatile group, and detubation time after ventilator weaning was 2hrs 44mins in nonpulsatile group and 1hrs 43mins in pulsatile group. 3. Average pulse pressure was 8mmHg in nonpulsatile group and 55mmHg in pulsatile group, and a mean arterial pressure was 66.0mmHg in nonpulsatile group and 60.7mmHg in pulsatile group. 4. Mean urine-output during ACC;ECC period was 9.717.3;9.913.2ml/kg/hr in nonpulsatile group and 14.215.0;15.817.5 in pulsatile group [p<0, 05], and thereafter progressive decrease of differences in urine output between two groups until POD 2, and lesser amounts of diuretics was needed in pulsatile group during same postoperative period. Serum BUN/Cr level showed no specific difference and urine concentration power was well preserved in both groups. 5. Plasma proteins and other Enzymes showed no differences between two groups, but serum GOT/GPT level was higher in nonpulsatile group till POD 2. 6. Serum Electrolytes showed no differences between two groups. 7. WBC, RBC, Platelet counts, Hgb and Hct were not different and Coagulogram was well preserved in both groups. 8. Plasma free Hgb level was 7.09mg% in pulsatile group compared with 3.48mg% in pulsatile group on POD 1 but was normalized on POD 2. Gross hemoglobinuria after ECC was noted in 6 cases [20%] of pulsatile group and 4 cases [13%] of nonpulsatile group. 9. In both groups, most patients were included in NYHA class III to IV [28 cases;93% in nonpulsatile group, 22 cases;73% in pulsatile group] preoperatively, and well improved to class I to 11[22 cases; 73% in nonpulsatile group, 30 cases; 100% in pulsatile group] postoperatively. There were 7 operative mortalities in nonpulsatile group only, which were 5 cases of TOF with hepatic failure, 1 case of multiple VSDs with low out-put syndrome, and 1 case of mitral valvular heart disease with cardiomyopathy. We concluded that the new, commercially available Cobe-Stckert pulsatile roller pump device was safe, simple, and reliable.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.6
• /
• pp.1-8
• /
• 2005

The quantity of light available for a space can be translated in term of the amount of energy savings through a process of a building energy simulation. To get significant energy savings in general illumination, the electric lighting system must be incorporated with a daylight - activated dimmer control. A prototype configuration of an once interior has been established and the integration between the building envelope and lighting and HVAC systems is evaluated based on computer modeling of a lighting control facility. First of all, an energy-efficient luminaire system is designed and the lighting analysis program, Lumen-Micro 2000 predicts the optimal layout of a conventional fluorescent lighting future to meet the designed lighting level and calculates unit power density, which translates the demanded met of electric lighting energy. A dimming control system integrated with the contribution of daylighting has been applied to the operating of the artificial lighting. Annual cooling load due to lighting and the projecting saving amount of cooling load due to daylighting under overcast diffuse sky m evaluated by computer software ENER-Win. In brief, the results from building energy simulation with measured daylight illumination levels and the performance of lighting control system indicate that daylighting can save over 70 percent of the required energy for general illumination in the perimeter zones through the year A 25[%] of electric energy for cooling and almost all off heating energy may be saved by dimming and turning off the luminaires in the perimeter zones.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.335-347
• /
• 2019

This study was undertaken to investigate the relationship between social support and depression of the elderly in care facilities. We enrolled 328 elderly people aged 65 years or older, admitted to 15 care facilities located in D metropolitan city. Data were collected through personal interviews conducted by interviewers who visited each care facility, from March 1 to May 31, 2018. Our results indicate a significantly higher distribution of depression in the group having lower social support; the score of depression was determined to be in a significant positive correlation with social support. Considering logistic regression, the adjusted odds ratio in the depressed group increased significantly by 2.7 times in the high group (Q3), 5.4 times in the middle group (Q2) and 10.1 times in the low group (Q1), which had the very high group of social support score. Multiple regression analysis revealed that the factors influencing depression include religion status, relationship with children, subjective health status, physical disabilities, smoking status, breakfast status, and social support, and the explanation power of the injected variables is 41.1%. Taken together, our findings indicate that the level of depression amongst the elderly in care facilities is significantly related to the social support available.