• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.827-839
• /
• 2021

Due to climate change and population growth, water scarcity is getting worse all over the world. Among various methods for desalination of seawater, the Multi-Effect Adsorptive Desalination method, which combines the existing Multi-Effect Desalination method and the Adsorptive Desalination method and can produce high-concentration-high-concentration freshwater, is emerging. Because the Multi-Effect Adsorptive Desalination method combines the two different methods, the system becomes complicated and the possibility of failure increases. Therefore, in this study, availability analysis was performed on the Multi-Effect Adsorptive Desalination process. A total of four types of reliability block diagrams were presented, and availability analysis was conducted based on them. The first form of a reliability block diagram is configured in series without any redundancy. The availability of the reliability block diagram composed of the serial system was found to be lower than the required availability. In order to increase availability, the redundancy to pumps and boiler are added to system. As a result of availability analysis, it was confirmed that designing desalination systems with redundancy to pump meets the 93% availability, which is typically required availability for various plants.

• 한국군사과학기술학회지
• /
• 제15권5호
• /
• pp.651-659
• /
• 2012

Target operational availability setting is the first step to setting up a goal which a weapon system development project have to achieve and doing RAM analysis during whole life of a weapon system. It is important as a key factor to doing RAM analysis in the early phase of weapon system development. This paper present a methodology to set a target operational availability for, especially, a warship when it develop. This methodology uses Operational Mode Summary/Mission Profile(OMS/MP) of the developing warship and RAM analysis results of similar warships to calculate wartime and peacetime target operational availability. It will be used in early phase of not only warship development but also army or aircraft weapon systems when these develop.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권4호
• /
• pp.295-304
• /
• 2016

Purpose: This paper presents an application of Markov Process to reliability and availability analysis. In order to do that of analysis, we set up a specific case of Tablet PC and it's usage scenario. The case has it some spares and maintenance and repair processes. Methods: Different configurations of the tablet PC and as well as their functions are defined. The system configuration and calculated failure rates of components are modeled from Windchill Quality Solution. Two models, without a spare and with spare, are created and compared using Markov Process. The Matlab numerical analysis is used to simulate and show the change of state with time. Availability of the system is computed by determining the time the system stays in different states. Results: The mission availability and steady-state condition availability in accordance with the mission are compared and the availability of the system with spares have improved availability than without spares. Simulated data shows that downtime of the system increased which results in greater availability through the consideration of spares. Conclusion: There's many techniques and methods to do reliability and availability analysis and mostly are time-independent assumptions. But Markov Process, even though its steady-state and ergodic properties, can do time analysis any given time periods.

• 시스템엔지니어링학술지
• /
• 제14권1호
• /
• pp.36-43
• /
• 2018

The availability of the weapon system can be analyzed through state modeling and simulation using the Markov process. In this paper, show how to analyze the availability of the weapon system and can use the Markov process to analyze the system's steady state as well as the RAM at a transient state in time. As a result of the availability analysis of tracked vehicles, the inherent availability was 2.6% and the operational availability was 1.2% The validity criterion was defined as the case where the difference was within 3%, and thus it was judged to be valid. We have identified the faulty items through graphs of the number of visits per state among the results obtained through the MPS and can use them to provide design alternatives.

• 한국국방경영분석학회지
• /
• 제29권2호
• /
• pp.81-99
• /
• 2003

This paper propose a method determining life cycle for military vehicle using availability analysis. Many studies determining life cycle for military equipments have been done recently However, those studies focused on economic life such as average system cost method, equivalent annual cost method and cumulative operations cost method. In many case, those results are not appropriate in deciding replacement in the field situation, we consider an effective life cycle method using availability concept. In order to determine an equipment life cycle. Two kinds of availability is considered. One is equipment yearly availability, the other is operational availability with operating distance per year. The life cycle is determined by achieving unit target availability level. The result using this concept for K­511 military vehicle life cycle is about 19 years, which is longer than previous studies.

• 한국군사과학기술학회지
• /
• 제17권4호
• /
• pp.471-478
• /
• 2014

Navy forces of ROK asked for more than 90% operational availability in the requirement document of combat ship. This study proposes the evaluation methodology of operational availability with the evaluation process, calculation formula, analysis of operational test data. As the case study, the developed methodology is proved to apply for 00 batch-I naval ship using the data to be acquired during the operational test period. The operational availability by test data was 90.03%, and it was satisfied with objective value 90%. The paper will contribute not only to establish the evaluation methodology of operational availability for combat ship but also other general weapon system.

• 한국군사과학기술학회지
• /
• 제23권4호
• /
• pp.426-434
• /
• 2020

This paper studies the impact of the maintenance time of anti-ship missile Harpoon on operational availability with real field data. The Harpoon maintenance simulation model is developed as a testbed for identifying the optimal inventory levels on operational availability. Using multiple linear regression analysis and integer programming, the optimal inventory levels of essential assemblies are suggested. Finally, the result of sensitivity analysis shows the quantitative impact of maintenance time on operational availability and inventory costs. The authors believe that this quantitative analysis can support policy decisions to decrease maintenance time of missiles.

• 한국군사과학기술학회지
• /
• 제22권3호
• /
• pp.416-424
• /
• 2019

This paper studies the optimal inventory levels of P-3 assemblies in order to assure the required operational availability. A simulation model is developed for identifying the impact of the inventory levels on operational availability. Based on the result of the simulation model, multiple regression analysis is performed. Finally, the optimal inventory levels of critical P-3 assemblies are determined with integer programming. Additionally, sensitivity analysis of depot maintenance period is also conducted for its impact on the operational availability.

• 한국위성정보통신학회논문지
• /
• 제10권4호
• /
• pp.107-112
• /
• 2015

본 논문에서는 정지궤도 복합위성 2B에 대한 환경위성지상국 시스템의 성능지표의 하나인 가용도를 예측하기 위한 H/W 및 S/W 시스템 가용도의 수학적 모델링을 제시하고, 직렬연결 시스템에 대한 가용도 예측 방법을 제시하였다. 또한, 본 논문에서는 환경위성 지상국 시스템의 가용도 예측 결과를 산출하였으며, 그 가용도 예측 결과는 0.998072로 분석 되었다.

• 대한안전경영과학회지
• /
• 제10권4호
• /
• pp.159-163
• /
• 2008

This paper proposes various measures of reliability, maintainability and availability in information technology service management(ISTM). Global ITSM standards such as ITIL(IT Infrastructure Library) and ISO/IEC 20000 are introduced. Especially availability management of De-facto and De-juire standards is concerned with users and customers of IT service. The study presents seven reliability measures, six maintainability measures and two availability measures. These results can be effectively used with a appropriate IT availability management tools such as CFIA(Component Failure Impact Analysis) and SOA(Service Outage Analysis), etc.