• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.573-577
• /
• 1995

An integration method for the hypersingular kernels, in the boundary integralequations used for the solution of crack-like problems in elasticity, has been developed. To isolate the stronger singularities, the actual boundaries are replaced by the smoothly curved auxiliary boundaries which provide the detoured, non-singular integration paths. The auxiliary boundary can be interpreted as a contracted form of the actual boundaries except for the singular element where the collocating point is located. For an optimal integration path for every singular collocation point, the auxiliary boundary may have different shape depending on the position of the collocation point on the singular element.

• ETRI Journal
• /
• 제29권3호
• /
• pp.390-392
• /
• 2007

In this paper, we propose a new error concealment (EC) method using inter-layer correlation for scalable video coding. In the proposed method, the auxiliary motion vector (MV) and the auxiliary mode number (MN) of intra prediction are interleaved into the bitstream to recover the corrupted frame. In order to reduce the bit rate, the proposed method encodes the difference between the original and the predicted values of the MV and MN instead of the original values. Experimental results show that the proposed EC outperforms the conventional EC by 2.8 dB to 6.7 dB.

• 전기학회논문지
• /
• 제64권1호
• /
• pp.57-63
• /
• 2015

Fault currents characteristics contain decaying DC offset. First cycle peak value of fault currents is higher than steady-state fault current value. These characteristics can affect the operation of protective device. To reduce the asymmetric fault current, the method using a series connection of two hybrid-type Superconducting Fault Current Limiter(SFCL) components, an auxiliary SFCL and a main SFCL, has been proposed. The auxiliary SFCL limits the first half cycle fault current, while main SFCL limits the steady state fault currents. This paper proposed a decision method of the optimal insertion resistance of auxiliary and main SFCL components. To verify the effectiveness of proposed scheme, the various simulations are performed by using Electromagnetic Transient Program(EMTP).

• Communications for Statistical Applications and Methods
• /
• 제26권5호
• /
• pp.507-517
• /
• 2019

Statistical matching is a method of combining multiple sources of data that are extracted or surveyed from the same population. It can be used in situation when variables of interest are not jointly observed. It is a low-cost way to expect high-effects in terms of being able to create synthetic data using existing sources. In this paper, we propose the several statistical micro matching methods using a multinomial logistic regression model when all variables of interest are categorical or categorized ones, which is common in sample survey. Under conditional independence assumption (CIA), a mixed statistical matching method, which is useful when auxiliary information is not available, is proposed. We also propose a statistical matching method with auxiliary information that reduces the bias of the conventional matching methods suggested under CIA. Through a simulation study, proposed micro matching methods and conventional ones are compared. Simulation study shows that suggested matching methods outperform the existing ones especially when CIA does not hold.

• 전력전자학회논문지
• /
• 제17권4호
• /
• pp.298-305
• /
• 2012

This paper proposes a soft switching boost converter with an auxiliary resonant circuit. The auxiliary resonant circuit is added to a general boost converter and that is composed of one switch, one diode, one inductor and two capacitors. The resonant network helps the main switch to operate with a zero voltage switching(ZVS) and auxiliary switch also operates under the zero voltage and zero current conditions. The soft switching range is extended by the auxiliary switch and it is possible to control the proposed converter with a pulse width modulation(PWM). The ZVS and ZCS techniques make switching losses decreased and efficiency of the system improved. A theoretical analysis is verified through the simulation and experiment.

• Journal of applied mathematics & informatics
• /
• 제7권2호
• /
• pp.483-491
• /
• 2000

In this paper, we use the auxiliary principle technique to suggest and analyze a class of predictor-corrector methods for solving noncoercive mixed variational inequalities. The convergence of the proposed method requires only the partially relaxed strongly monotonicity. which is even weaker than the co-coercivity. As special cases, we obtain a number of new and known results for classical variational inequalities.

• 전력전자학회논문지
• /
• 제25권4호
• /
• pp.293-302
• /
• 2020

This study proposes a triple-loop current control method for the auxiliary power unit of fuel cell trains. The auxiliary power unit of fuel cell trains has a grid-connected function when power is supplied to the utility grid. Moreover, the auxiliary power unit of trains has a 1500 V DC link voltage; thus, PWM frequency cannot be increased to a high frequency. Owing to this low PWM frequency condition, creating a triple-loop design is difficult. In this study, a triple-loop controller is developed for a capacitor voltage controller in standalone mode that operates as an auxiliary power supply for trains and for a grid current controller in grid control mode with an inner capacitor voltage controller. The voltage controller employs an inductor current controller inner loop. To overcome low PWM frequency, a design method for the bandwidth of the capacitor voltage controller considering the bandwidth of the inner inductor current controller is described. The effectiveness of the proposed method is proven using PSIM simulation.

• 응용통계연구
• /
• 제35권1호
• /
• pp.131-146
• /
• 2022

로지스틱 회귀 모형은 다양한 분야에서 범주형 종속 변수를 예측하거나 분류하기 위한 모형으로 많이 사용되고 있다. 로지스틱 회귀 모형에 대한 전통적인 베이지안 추론 기법으로 메트로폴리스-헤이스팅스 알고리즘이 많이 사용되었지만, 수렴의 속도가 느리고 제안 분포에 대한 적절성을 보장하기 어렵다. 따라서, 본 논문에서는 모형에 대한 베이지안 추론 방법으로 Frühwirth-Schnatter와 Frühwirth (2007)에서 제안된 보조 혼합 샘플링(auxiliary mixture sampling) 기법을 사용하였다. 이 방법은 모형의 선형성과 정규성을 만족시키기 위해 두 단계에 거쳐 잠재변수를 도입하며, 결과적으로 깁스 샘플링을 통한 추론을 가능하게 한다. 제안한 모형의 효과를 검증하기 위해 2020년 지역사회 건강조사 당뇨병 자료에 적용하여 메트로폴리스-헤이스팅스를 사용한 모형과 추론 결과를 비교 분석하였다. 또한, 다양한 분류 모형들과 본 논문에서 제안한 모형의 분류 성능을 비교한 결과 제안된 모형이 분류 분석에서도 좋은 성능을 보이는 것을 확인할 수 있었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.519-524
• /
• 2002

This paper presents a soft-switching technique of single-stage power conversion Matrix Converter of AC-AC converters. Conventional hard-switching method is limited to operate at low switching frequency due to increased switching loss. In this paper, by additional auxiliary switch circuits, it is shown that the main switch of the matrix converter operate as a zero-voltage switches, and the auxiliary switch operate as a zero current switch. Finally, the soft-switching technique with auxiliary switches is compared with conventional hard-switching technique, and Is analyzed by simulation.

• 한국표면공학회지
• /
• 제28권3호
• /
• pp.164-173
• /
• 1995

Based on the potential-theory model for secondary current distribution, we could predict the thickness distributions of electroplating on patterned substrates with the different size of the auxiliary electrode. The substrates contain lithographic patterns at each sample geometry. Each sample geometry had different current distribution at the same condition except the size of the auxiliary electrodes. The size effect of the auxiliary electrode on thickness distribution of electrodeposition on patterned electrode was investigated in a series of experiments. Copper was galvanostatically deposited from an acid-sulfate solution in a reciprocating paddle cell. The thickness distributions of the workpiece scale measured by profilometry across the specimen were in good agreement with the current distribution predicted by boundary element method.