• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.562-564
• /
• 2002

In recent years, environments of our globe has been getting worse as a result of rapid growth of socioeconomic activities. The global environmental issues of acid rain, green house effect and ozone depletion are caused by various chemical pollutants, emitted from industries, automobiles and home. Most of these pollutants are produced by combustion processes. CO2 as a chief criminal of the greenhouse effect is a main combustion product of fossil fuels. Development of solid-state electrochemical devices for detecting CO2 is demonstrated based on various combination of solid electrolytes and auxiliary sensing materials. The object of this research is to develop various sensor performance for solid electrolyte gas sensor, and to test gas sensor performance manufactured. So we try to present a guidance for developing potential type gas sensor. We concentrated on development of manufacturing process and performance test.

• Nuclear Engineering and Technology
• /
• 제34권6호
• /
• pp.596-609
• /
• 2002

Korea Electric Power Research Institute has developed the in-house safety analysis methodologies for non-LOCA(Loss Of Coolant Accident) events based on codes and methodologies of vendors and Electric Power Research Institute . According to the new methodologies, analyses of system responses and calculation of DNBR(Departure from Nucleate Boiling Ratio) during the transient have been carried out with RETRAN code and a sub-channel analysis code, respectively. However, it takes too much time to calculate DNBR for each case using the two codes to search for the limiting case from sensitivity study. To simplify the search for the limiting case, accordingly, RETRAN code has been modified to roughly calculate DNBR using hot channel modeling. The W-3 correlation is already included in RETRAN as one of the auxiliary DNBR models. However, WRB-1 and WRB-2 correlations required to analyze some Westinghouse type fuels are not considered in RETRAN DNBR models. In this paper, the RETRAN DNBR models using the correlations have been developed and the partial and complete loss of forced reactor coolant flow events have been analyzed for Yonggwang units 1 and 2 with the new methodologies to validate the models. The results of the analyses have been compared with those mentioned in the chapter 15 of the Final Safety Analysis Report.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.206-214
• /
• 2022

Automobile manufacturers in each country are spurring the development of electric vehicles that use electric energy, an eco-friendly energy, as a futuristic vehicle. Electric vehicles have the advantage of no harmful gas or environmental pollution and low noise. Unlike automobiles using existing internal combustion engines using fossil fuels, electric vehicles use the electricity of batteries to cause rotational motion of motors. In the electric vehicle driven by the motor, it is indispensable to develop a controller for controlling the motor. One of the areas where automobile manufacturers are concentrating is the development of small electric vehicles as a personal transportation means. Small electric vehicles such as electric motorcycles, one-seat electric vehicles and two-seat electric vehicles are expanding the market as a means of operating throughout the city. In the domestic road conditions with many hills, it is effective to have a separate transmission system for small electric vehicles to drive smoothly. In this study, we propose a new type of continuously variable transmission(CVT) system to ensure that small electric vehicles can be driven smoothly in hilly domestic terrain. The proposed CVT system is equipped with a basic disk and a rotational disk in the driving pulley and the driven pulley, respectively, and is applied with a sloping spline to rotate the rotational disk. To commercialize the proposed CVT system, an experimental device was developed to examine the power transmission efficiency and the configuration of the CVT system was proposed.

• 한국수소및신에너지학회논문집
• /
• 제14권1호
• /
• pp.35-45
• /
• 2003

Polymer electrolyte fuel cells(PEFC) have been considered to be a suitable candidate for residential, portable and mobile applications, due to their high efficiency and power density, even at low operating temperature. KIER developed a 5kW class PEFC system for residential application and operated the system for over 1,000 hours. To develop a 5kW PEFC system, performance of a cell was improved through successive tests of single cell of small and large area. Fabrication of three 2,5 kW class stacks, design and fabrication of natural gas reformer, design of auxiliary equipments such as DC/DC converter, DC/AC inverter and humidifying units were carried out along with integration of components, operation and evaluation of total system. During the development period from 1999 to 2001, MEA(membrane electrode assembly) fabrication technologies, design and fabrication technologies for separators, stacking technologies and so on were developed, thereby providing basis for developing stacks of higher efficiency and power density in the future. Experience of development of natural gas reformer opened possibilities to use various kinds of fuels. Main results obtained from the development of a 5kW class PEFC system for residential application are summarized.

• 한국농공학회논문집
• /
• 제64권1호
• /
• pp.1-13
• /
• 2022

In Korea, attention is being paid to the use of renewable energy in the livestock industry, and Ground Source Heat Pump (GSHP), which is advantageous for temperature control, is considered as one of the ways to reduce the use of fossil fuels. But GSHP is expensive to install, which proper capacity calculation is required. GSHP capacity is related to its maximum energy load. Energy loads are affected by climate characteristics and time, so dynamic analysis is required. In this study, the optimal capacity of GSHP was calculated by calculating the heating and cooling load of pig farms using BES (Building Energy Simulation) and economic analysis was performed. After designing the inside of the pig house using TRNSYS, one of the commercial programs of the BES technique, the energy load was calculated based on meteorological data. Through the calculated energy load, three heating devices and GSHP used in pig farms were analyzed for economic feasibility. As a result, GSHP's total cost of ownership was the cheapest, but the installation cost was the highest. In order to reduce the initial cost of GSHP, the capacity of GSHP was divided, and a scenario was created in which some of it was used as an auxiliary heating device, and economic analysis was conducted. In this study, a method to calculate the proper capacity of GSHP through dynamic energy analysis was proposed, and it can be used as data necessary to expand the spread of GSHP.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.306-309
• /
• 2005

One of the most critical issues in sol id oxide fuel cell (SOFC)running on hydrocarbon fuels is the risk of carbon formation from the fuel gas. The simple method to reduce the risk of carbon formation from the reactions is to add steam to the fuel stream, leading to the carbon gasification react ion. However, the addition of steam to fuel is not appropriate for the auxiliary power unit (APU) and potable power generation (PPG) systems due to an increase of complexity and bulkiness. In this regard, many researchers have focused on so-called 'direct methane' operation of SOFC, which works with dry methane without coking. However, coking can be suppressed only by the operation with a high current density, which may be a drawback especially for the APU and PPG systems. The single chamber fuel cell (SC-SOFC) is a novel simplification of the conventional SOFC into which a premixed fuel/air mixture is introduced. It relies on the selectivity of the anode and cathode catalysts to generate a chemical potential gradient across the cell. Moreover it allows compact and seal-free stack design. In this study, we fabricated honeycomb type mixed-gas fuel cell (MGFC) which has advantages of stacking to the axial direction and increasing volume power density. Honeycomb-structured SOFC with four channels was prepared by dry pressing method. Two alternative channels were coated with electrolyte and cathode slurry in order to make cathodic reaction sites. We will discuss that the anode supported honeycomb type cell running on mixed gas condition.

• 한국콘텐츠학회논문지
• /
• 제22권7호
• /
• pp.55-62
• /
• 2022

페로브스카이트 태양전지는 4차 산업혁명으로 사물인터넷, 가상환경 등의 증가에 따른 전력 수요가 급증하면서 점진적으로 고갈되어가는 석유, 석탄, 천연가스 등의 화석연료를 대체할 태양에너지, 풍력, 수력, 해양에너지, 바이오에너지, 수소에너지 등의 신재생 에너지 분야에서 연구가 활발한 부분이다. 페로브스카이트 태양전지는 페로브스카이트 구조를 가진 유-무기 하이브리드 물질을 사용하는 태양전지 소자로 고효율, 저가의 용액 및 저온 공정으로 기존의 실리콘 태양전지를 대체할 수 있는 장점들이 있다. 기존의 경험적 방법으로 예측한 광흡수층 박막을 최적화하기 위해서 소자 특성 평가를 통해 신뢰도를 검증해야 한다. 그러나 광흡수층 박막 소자 특성 평가 비용이 많이 소요되므로 시험 횟수에 제약이 따른다. 이러한 문제점을 해결하기 위하여 광흡수층 박막 최적화의 보조 수단으로 머신러닝이나 인공지능 모델을 이용하여 명확하고 타당한 모델의 개발과 적용 가능성이 무한하다고 본다. 이 연구에서는 페로브스카이트 태양전지의 광 흡수층 박막 최적화를 추정하기 위하여 서포트 벡터 머신의 선형 커널, 가우시안 커널, 비선형 다항식 커널, 시그모이드 커널의 회귀분석 모델을 비교하여 커널 함수별 정확도 차이를 검증하였다.

• 유기물자원화
• /
• 제17권3호
• /
• pp.27-39
• /
• 2009

본 연구는 가연성폐기물, 음식물폐기물 및 하수슬러지를 혼합하여 연료로 제조하여, 연소장치에서 다양한 연소조건에 따라 배출되는 배연가스를 분석하여 연소특성을 조사하였다. CO가스성분은 연소과정에서 불완전연소 부분을 평가하는 가스성분으로서, 연소장치의 실험조건이 온도 $800^{\circ}C$와 공기비 2일 때 가장 낮게 발생하였다. $CO_2$는 시료가 완전 연소되어 최종적으로 발생되는 부산물로서 연소조건이 가장 최적상태인 온도 $800^{\circ}C$와 공기비 2일 때 가장 높은 농도가 발생하였다. $SO_2$ 발생은 시료 중에 황 함유량이 높은 S.1에서 높게 나타났다. NOx는 질소성분이 높은 S.1시료와 온도 $800^{\circ}C$의 조건에서 공기비 m=2의 조건에서 NOx의 발생이 높게 나타났다. HCl가스는 연소과정에서 산소의 촉매 반응을 통해서 분진이나 금속촉매물질과 반응하여 다이옥신류를 발생시키는 전구물질로서 분석결과에서 보면 시료의 Cl함유량이 많은 시료와 동일한 시료에서 온도 $800^{\circ}C$와 공기비 2일 때가 가장 낮은 HCl의 농도가 발생되었다. $NH_3$는 시료의 혼합비율과 온도조건보다는 공기비 2일 때 연소시작 3분 후에 가장 낮게 나타났으며, 연소온도 보다는 공기비가 $NH_3$의 생성에 더 큰 영향을 미치는 것으로 나타났다. $H_2S$ 발생은 시료의 황 함유량이 높은 S.1시료와 하수슬러지나 음식물쓰레기 혼합 비율이 높은 경우 높게 나타났다. 연소실험에서 혼합비율에 따라서 제조된 S.1과 S.2의 시료를 연소한 결과 CxHy농도 무연탄 연소시 발생농도와 비슷하게 나타남으로서, 성형하여 제조된 연료는 보조연료 및 주연료로서 가치가 있는 것으로 평가되었다.