• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.6
• /
• pp.406-415
• /
• 2023

In this study, we focused on developing and verifying ship collision avoidance algorithms using Unity simulator and ROS(Robot Operating System). ROS is used to establish an environment where communication between different operating systems is possible, and a dynamic model of a ship is constructed within Unity simulator. The Lidar data collected in Unity environment is passed to the system based on python through ROS. In the system based on python, control command values were created through the logic of the collision avoidance algorithm using data, and the values were transferred back to Unity to control the movement of the virtual ship. Through the developed simulation system, the reliability of the collision avoidance algorithm of ships with two different forms in an environment similar to the actual physical world was confirmed. As a result, it was confirmed on the simulator that it could be avoided without collision even in an environment with various types of obstacles, and that the avoidance characteristics according to the dynamics of the ship could be analyzed.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.5
• /
• pp.447-453
• /
• 2019

Recently, environmental regulations have been strengthened for SOX, NOX, and CO2, which are ship exhaust gases. In addition, according to the 4th Industrial Revolution, research on autonomous ship technology has become active and interest in electric propulsion systems is increasing. This paper analyzes the power load characteristics of an electric propulsion ship, which is the basic technology for an autonomous ship, in terms of energy management. For the load analysis, data were collected for a 6,800 TEU container ship with a mechanical propulsion system, and the propulsion load was converted to an electric power load and clustered according to the characteristics using a SOM (Self-Organizing Map). As a result of the load analysis, it was confirmed that the load characteristics of the ship could be explained by the operation mode of the ship.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.447-448
• /
• 2022

Studies on autonomous ships has received a lot of attention, recently. However, a study on autonomous navigation assistance service for Navigation Assistance Service(NAS) which is second item of Maritime Service Portfolio(MSP) suggested by IMO was not studied. Therefore, in this paper, we derive information items for autonomous navigation assistance service and research on a display system for displaying the items.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.3
• /
• pp.281-287
• /
• 2023

Establishing a ship's passage plan is an essential step before it starts to sail. The research related to the automatic generation of ship passage plans is attracting attention because of the development of maritime autonomous surface ships. In coastal water navigation, the land, islands, and navigation rules need to be considered. From the path planning algorithm's perspective, a ship's passage planning is a global path-planning problem. Because conventional global path-planning methods such as Dijkstra and A^* are time-consuming owing to the processes such as environmental modeling, it is difficult to modify a ship's passage plan during a voyage. Therefore, the D^* algorithm was used to address these problems. The starting point was near Busan New Port, and the destination was Ulsan Port. The navigable area was designated based on a combination of the ship trajectory data and grid in the target area. The initial path plan generated using the D^* algorithm was analyzed with 33 waypoints and a total distance of 113.946 km. The final path plan was simplified using the Douglas-Peucker algorithm. It was analyzed with a total distance of 110.156 km and 10 waypoints. This is approximately 3.05% less than the total distance of the initial passage plan of the ship. This study demonstrated the feasibility of automatically generating a path plan in coastal navigation for maritime autonomous surface ships using the D^* algorithm. Using the shortest distance-based path planning algorithm, the ship's fuel consumption and sailing time can be minimized.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.18-20
• /
• 2021

In order to prevent collision accidents of ships, which has been increasing recently, research on artificial intelligence-based autonomously operated ships (Maritime Autonomous Surface Ship, MASS) is underway. However, most of the studies related to autonomous ships mainly target medium-to-large ships due to the size and cost of the autonomous navigation system, and the sensors used here have a problem in that it is difficult to mount them on small ships. Therefore, this paper provides a path tracking system equipped with GPS and IMU sensors for autonomous operation of small ships. GPS and IMU sensors are utilized to determine the exact position of the vessel, which allows the proposed system to manually control the small vessel model to create a path and then when the small vessel travels the same path. Use the Pure Pursuit algorithm to follow the path. As a result, In this research, it is expected that a lightweight and low-cost sensor can be used to develop an autonomous operation system for small ships at low cost.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.38-46
• /
• 2021

In the era of the 4th Industrial Revolution, the interest in autonomous ship technology is increasing as high-tech technologies are being increasingly utilized throughout the industry. Therefore, we conducted a basic study on autonomous ships. In particular, a passenger ship model was produced and an autonomous navigation system was established by applying the ardupilot used for drones. The possibility of automatic control of the autonomous ship operations was confirmed by executing various voyage plans using the built model ship. In the performance test for maintaining the course the model ship could not follow the designated course straight and sailed up to 5.4 m away from the course while navigating in a zigzag (S-shape); however, after the parameters were modified, the deviation distance was reduced to a maximum of 1.8 m. In the turning performance test, the maximum diameter of the turning sphere was found to be approximately 9.3 m, but no significant change could be confirmed even after the parameters were modified. However, the results of our tests on slowing down the ship before arriving at the WP confirmed that the diameter of the turning sphere was reduced to a maximum of approximately 3.2 m. In order to evaluate the stopping performance, the last scheduled stopping position of all experiments was compared with the actual stopping position of the model ship and it was confirmed that the model ship stopped at a point at least 0.4 m and a maximum of 6.2 m away from the stopping position. In the future, improvement of course stability, turning performance, and stopping performance is required through modification and supplementation of various parameters. Moreover, a study on automatic berthing of the model ship through automatic control is planned.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.77-77
• /
• 2018

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.76-76
• /
• 2018

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.85-85
• /
• 2018

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.181-181
• /
• 2018