• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.81-81
• /
• 2018

• 한국항해항만학회지
• /
• 제43권6호
• /
• pp.353-360
• /
• 2019

Technology-driven development of a new system makes it difficult for users and stakeholders to identify or intervene in the development process, resulting in systems with unnecessary functions and poor quality services. Applying the software architecture design process to the initial design of the navigation system platform of autonomous ships enables the development of a system that reflects the required functions and service quality of the stakeholders. The design, which includes all of the subsystems that make up an autonomous ship platform, is close to an enterprise architecture. Thus, we strived to design a navigation system platform suitable for the design range of the software architecture. This study analyzed the definition of functional requirements, and quality attributes by applying the software architecture design procedure. This study was conducted to identify the characteristics of the navigation system and platform needs, and the stakeholders were identified. To derive the functional requirements and constraints of the platform, a quality attributes workshop was held engaging stakeholders, and the results of the analysis of functional requirements and quality attributes were listed. Based on the results of this study, the architect can establish the evidence and technical solutions that are integral for the architecture development, and will facilitate the creation of quality attribute scenarios.

• 센서학회지
• /
• 제19권3호
• /
• pp.246-257
• /
• 2010

Autonomous guided robot navigation which consists of following unknown paths and avoiding unknown obstacles has been a fundamental technique for unmanned robots in outdoor environments. The unknown path following requires techniques such as path recognition, path planning, and robot pose estimation. In this paper, we propose a novel sensor fusion system for autonomous guided robot navigation in outdoor environments. The proposed system consists of three monocular cameras and an array of nine infrared range sensors. The two cameras equipped on the robot's right and left sides are used to recognize unknown paths and estimate relative robot pose on these paths through bayesian sensor fusion method, and the other camera equipped at the front of the robot is used to recognize abrupt curves and unknown obstacles. The infrared range sensor array is used to improve the robustness of obstacle avoidance. The forward camera and the infrared range sensor array are fused through rule-based method for obstacle avoidance. Experiments in outdoor environments show the mobile robot with the proposed sensor fusion system performed successfully real-time autonomous guided navigation.

• International Journal of Automotive Technology
• /
• 제8권5호
• /
• pp.583-591
• /
• 2007

This paper describes the development of the $H_{\infty}$ lateral control system for an autonomous ground vehicle operating a limited area using the RTK-DGPS(Real Time Kinematic-Differential Global Positioning System). Before engaging in autonomous driving, map data are acquired by the RTK-DGPS and used to construct a reference trajectory. The navigation system contains the map data and computes the reference yaw angle of the vehicle using two consecutive position values. The yaw angle of the vehicle is controlled by the $H_{\infty}$ controller. A prototype of the autonomous vehicle by the navigation method has been developed, and the performance of the vehicle has been evaluated by experiment. The experimental results show that the $H_{\infty}$ controller and the RTK-DGPS based navigation system can sufficiently track the map at low speed. We expect that this navigation system can be made more accurate by incorporating additional sensors.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 춘계학술대회
• /
• pp.258-260
• /
• 2023

목포해양대학교와 삼성중공업은 2021년 공동 연구를 통하여 '실습선 기반 원격/자율 운항 선박 시스템 개발 및 검증'을 수행하였고 이를 통하여 목포해양대학교 실습선인 세계로호를 활용하여 삼성중공업의 자율운항 선박 시스템(Autonomous Navigation System)인 SAS의 Test Bed 시연 실험 시스템을 구축하여 2022년 자율운항 선박(MASS) 기술 요소에 대한 시뮬레이션 기반 SAS(Samsung Autonomous Ship) System 검증 및 '운항 노선에 대한 설정을 통한 선박 자율운항 검증'을 위한 실선·실해역 실험을 통해 이를 시연 및 검증을 시행하였다. 특히 의미 있는 것은 자율운항선박 실선 테스트 과정 중 발생할 수 있는 모든 위험요소 분석을 위해 한국선급과 HAZID Workship을 실시하였고, 이를 통해 국내최초 자율운항실험용 기국 승인 및 선급임시검사 완료 후 실험이 진행되었다는 것이다. 이 연구에서는 실습선 기반 자율운항 선박 실해역 실험 연구를 소개하고 그 결과를 운항자 입장에서 분석하여 향후 보완하여야 할 사항을 제시하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1375-1378
• /
• 1997

In this paper, we presents the algorithm which is to recognize the traffic sign on the road the traffic signal in a video image for autonomous navigation. First, the rocognition of traffic sign on the road can be detected using boundary point estimation form some scan-lines within the lane deducted. For this algorithm, index matrix method is used to detemine what sign is. Then, the traffic signal recognition is performed by usign the window minified by several scan-lines which position may be expected. For this algoritm, line profile concept is adopted.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.679-687
• /
• 2019

This paper presents the autonomous swimming technology developed for an Autonomous Underwater Vehicle (AUV) operating in the underwater jacket structure environment. To prevent the position divergence of the inertial navigation system constructed for the primary navigation solution for the vehicle, we've developed kinds of marker-recognition based underwater localization methods using both of optical and acoustic cameras. However, these two methods all require the artificial markers to be located near to the cameras mounted on the vehicle. Therefore, in the case of the vehicle far away from the structure where the markers are usually mounted on, we may need alternative position-aiding solution to guarantee the navigation accuracy. For this purpose, we develop a sonar image processing based underwater localization method using a Forward Looking Sonar (FLS) mounted in front of the vehicle. The primary purpose of this FLS is to detect the obstacles in front of the vehicle. According to the detected obstacle(s), we apply an Occupancy Grid Map (OGM) based path planning algorithm to derive an obstacle collision-free reference path. Experimental studies are carried out in the water tank and also in the Pohang Yeongilman port sea environment to demonstrate the effectiveness of the proposed autonomous swimming technology.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2020년도 추계학술대회
• /
• pp.70-71
• /
• 2020

자율운항선박시대에는 인공지능기술이 VR, AR과 결합하여 더욱 진화된 몰입형 경험을 제공할 수 있을 것이다. 몰입 기술은 사용자의 오감을 현혹시켜 실제와 유사한 경험과 감성을 제공할 수 있다. VR이나 AR을 통해 자율운항 시 선원이 운항에 몰입할 수 있고 가상의 선박과 상호작용할 수 있는 자연스런 환경을 제공해 주는 것이 필요하다. 본 연구에서는 자율운항선박시대를 대비하여 선원들이 VR이나 AR을 통해 자율운항 시에 몰입형 사용자경험을 구현할 수 있는 핵심 특성이

• 대한임베디드공학회논문지
• /
• 제3권2호
• /
• pp.57-65
• /
• 2008

Recently many researches on intelligent robots have been studied. An intelligent robot is capable of recognizing environments or objects to autonomously perform specific tasks using sensor readings. One of fundamental problems in vision-based robot applications is to recognize where it is and to decide safe path to perform autonomous navigation. However, previous approaches only consider well-organized environments that there is no moving object and environment changes. In this paper, we introduce a novel navigation strategy to handle occlusions caused by moving objects using various computer vision techniques. Experimental results demonstrate the capability to overcome such difficulties for autonomous navigation.

• 대한임베디드공학회논문지
• /
• 제8권4호
• /
• pp.205-212
• /
• 2013

In recent, the demand of Unmanned Aerial Vehicles (UAVs) that can autonomous navigation and remote control has been increased in military, civil and commercial field. Particularly, existing researches focused on autonomous navigation method based on vanish point and remote control method based on event processing in indoor environments. However, the existing methods have some problems. For instance, a detected vanish point in intersection point has too much detection errors. In addition, the delay is increased in existing remote control system for processing images in real time. Thus, we propose improved vanish point algorithm by removing detection errors in intersection point. We also develop a remote control system with android platform by separating flying control and image process. Finally, we compare the proposed methods with existing methods to show the improvement of our approaches.