• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1585-1586
• /
• 2011

• Journal of Welding and Joining
• /
• 제29권5호
• /
• pp.72-81
• /
• 2011

In the present day, the needs of new steel for lightweight car-body have been increased in the automotive industry. however, the resistance spot welding is difficult to apply to the new steel because of the narrow weld current range and defects. As the solutions to these problems, adhesive bonding process is proposed. Adhesive bonding which reduce noise and vibration can be applied to joining the new steel. In this study, crash tests of b-pillar applied the resistance spot welding, structural adhesive bonding, the mixture of the structural adhesives and resistance spot welding were performed. And FEM crash model for b-pillar applied the structural adhesive bonding was developed. The results of experiment and analysis on b-pillar crash test were compared to verify the validity.

• 접착 및 계면
• /
• 제12권3호
• /
• pp.99-104
• /
• 2011

21세기 들어 자동차 도료산업은 엄격한 환경규제 및 생산 효율성 향상 및 더 낮은 생산비용으로 자동차용 도료를 생산하기 위하여 세정 및 전처리 과정을 삭제한 pre-primed 도장 시스템이 연구되고 있다. 이러한 pre-primed 도료 시스템의 경우, 차체 조립 전 단계에 강판이 유기 도막으로 도장되어있기 때문에 기존의 용접을 통한 조립이 힘들어 용접공정을 대체할 수 있는 새로운 비용접식 접합기술의 개발이 필요한 실정이다. 본 연구에서 비용접식 pre-primed 시스템에 적용하기 위하여 유연성과 성형성이 향상된 polyester계의 primer 1과 polyurethane계의 primer 2를 개발하였다. 개발된 도료의 물리적인 물성과 도장면의 부착력 평가 결과, primer 1이 primer 2에 비하여 연필경도, 내용제성, 유연성 및 접착제와의 부착력이 뛰어남을 알 수 있었으며, 용접공정을 대신한 비용접식 pre-primed 시스템의 가능성을 확인할 수 있었다.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.60-64
• /
• 2006

In modern vehicle construction the search for means of weight reduction, improving durability, increasing comfort and raising body stiffness are issues of priority to the design engineer. The intelligent usage of many materials such as high strength steel, light-alloys and plastics enables a significant vehicle weight reduction to be achieved. The classical joining techniques used in the automobile industry need to be newly-evaluated since they often do not present workable solutions for such mixed-material connections, for example aluminium/steel. Calculation/simulation methods have made progress as a key factor for broader and more cost-effective implementation of structural bonding. This will lead to reduction of spotwelds and accelerate the car development. A special focus of the paper is the use of high strength steel grades. It will be shown that adhesive bonding is a key tool for yielding the potential of advanced high strength steel for low gauging without compromising the stiffness. The latest status of adhesive development has been described. Improvements with physical strength and glass temperature as well as of process relevant properties are shown. Also the situation regarding occupational hygiene is treated, showing that by further spotweld point reduction the emission around the working area can be even lowered against the current praxis. High performing lightweight design cannot longer do without high performing crash durable adhesives.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.42-47
• /
• 2021

Recently, many structures using lightweight materials have been developed. This study was conducted by using Al6061-T6 and carbon fiber reinforced plastic (CFRP), two common lightweight materials. In addition, the failure characteristics of an interface bonded between a single material and a heterogeneous bonding material were analyzed. The specimens bonded with CFRP and Al6061-T6 were utilized by the combination of the heterogeneous bonding material. The specimens had a double cantilevered shape and the bonding between the materials was achieved by applying a structural adhesive. The experiments were conducted in opening mode: the lower part of the samples was fixed, while their upper part was subjected to a forced displacement of 3 mm/min by using a tensile tester. Under the tested amount of strength, energy release rate, and considering the specimens' fracture characteristics in opening mode, the specimen "CFRP-Al" presented the maximum stress, followed by "Al" and "CFRP". We can hence conclude that the inhomogeneous material "CFRP-Al" is useful for the construction of lightweight structures bonded with structural adhesive.

• 한국융합학회논문지
• /
• 제9권5호
• /
• pp.151-156
• /
• 2018

본 연구에서는 CFRP와 금속 또는 비금속을 접착제로 접합시켜 이 재료에 대한 파손 연구를 수행하였다. 그 해석 조건으로는 DCB 시험편을 이용하여 시험편의 상부에는 CFRP, 시험편의 하부에는 금속 또는 비금속 재료로 지정하였고 두 상부와 하부 사이를 구조용 접착제로 부착하는 것을 묘사하였다. 이 해석 결과로는 알루미늄으로 접착된 시험편에서 가장 작은 등가응력 보였고 티타늄을 사용하였을 때 박리된 CFRP시험편에서의 최대 전단응력은 가장 낮음을 보였다. 결론적으로 티타늄을 사용하였을 때 시험편의 변형이 가장 작은 것을 알 수 있었고 본 연구 결과를 토대로 접착제를 이용한 접착 계면의 파손데이터를 실생활에 융합하여 그 미적 감각을 나타낼 수 있다.

• Composites Research
• /
• 제33권6호
• /
• pp.401-407
• /
• 2020

공학 및 산업 분야에서는 구조적인 부분들에서 경량 복합 소재가 강과 같은 금속 소재를 대체해 오고 있다. 이러한 복합 소재는 리벳, 용접이나 볼트 및 너트를 이용한 체결 방법을 대신하여 접착제 체결 방법을 적용하고 있다. 복합 소재에 접착제 체결 방법을 적용하기 위해서는 접착계면에 대한 강도 특성 연구가 필수적으로 요구된다. 섬유 강화 플라스틱 복합 소재인 CFRP를 용이하게 가공하여 본 연구를 수행하였다. CFRP와 알루미늄(Al6061), 알루미늄 폼(Al-foam)을 가진 이종 복합 소재로 된 경사진 이중외팔보(TDCB) 시험편들로서 면내 전단과 면외 전단의 하중 조건들하에서 정적 실험을 수행하였다. 본 연구 결과를 통하여 이중외팔보들의 파괴 특성과 그 파단 시점을 파악하여 접착계면을 가진 이종 복합 소재 구조물에 관한 내구성을 검토하였다.

• 한국기계가공학회지
• /
• 제20권4호
• /
• pp.127-134
• /
• 2021

In this study, the adhesive fracturing characteristics of a DCB specimen due to single and heterogeneous bonding materials under tearing load was investigated. The experiments were conducted to examine the fracturing properties of the adhesive DCB specimen. As an experimental condition, a forced displacement of 3mm/min was applied to one side while the other side was fixed. As a result of the experiment, it was found that the AL6061-T6 material was superior to the CFRP material in terms of maximum stress, specific strength, and energy release rate when compared to the adhesive fracturing property of a single material. We tested CFRP-AL, a heterogeneous bonding material, and compared its experimental results to the results from the single materials. Based on these results, CFRP-AL with a heterogeneous bonding material was observed to have the superior structural safety compared to single materials for the mode III fracture type.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1349-1354
• /
• 2008

In this study, we try to find the root cause of water condensing failures in a headlamp using chemical and mechanical analysis. Through the surface inspection by OM, SEM and CT, it was found that water infiltrate into the headlamp through hotmelt adhesive debonding part caused by adhesion force degradation and poor quality. IR spectra shows that adhesion force degradation are characterized by increase of some functional group(1742, 1710, 1649, 1016). Through the ESPI measurement, it is turned out that bonding structural change by thermal expansion and degradation of adhesive can be the cause of void generation. So it is recommended that cooling passage and the bonding part should be redesigned to give a guarantee of less thermal stress and high adhesion quality.

• Journal of Welding and Joining
• /
• 제34권1호
• /
• pp.21-25
• /
• 2016

The automotive vehicle is made through the following processes such as press shop, welding shop, paint shop, and general assembly. Among them, the most important process to determine the quality of the car body is the welding process. Generally, more than 400 pressed panels are welded to make BIW (Body In White) by using the RSW (Resistance Spot Welding) and GMAW (Gas Metal Arc Welding). Recently, as the needs of light-weight material due to the $CO_2$ emission issue and fuel efficiency, new joining technologies for aluminum, CFRP (Carbon Fiber Reinforced Plastic) and etc. are needed. Aluminum parts are assembled by the spot welding, clinching, and SPR (Self Piercing Rivet) and friction stir welding process. Structural adhesive boning is another main joining method for light-weight materials. For example, one piece aluminum shock absorber housing part is made by die casting process and is assembled with conventional steel part by SPR and adhesive bond. Another way to reduce the amount of the car body weight is to use AHSS (Advanced High Strength Steel) panel including hot stamping boron alloyed steel. As the new materials are introduced to car body joining, productivity and quality have become more critical. Productivity improvement technology and adaptive welding control are essential technology for the future manufacturing environment.