• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.6
• /
• pp.397-407
• /
• 2017

In this study, a SCR system is employed to selectively reduce $NO_X$, which is a major cause of environmental pollution and issues in diesel engines. In particular, this paper focuses on the combination of feedforward injection strategies, depending on the NO/$NO_X$ ratio, and feedback injection control, using $NH_3$ coverage ratio, based on a SCR model. A 2.2 L passenger diesel engine, which is equipped with a diesel oxidation catalyst (DOC) and a diesel particle filter (DPF), was used in the experiments. The developed control algorithm is implemented on a real-time computer with injection control algorithm. By analyzing the $NO_X$ emission measurement, the performance of the proposed injection control algorithm is verified.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.18-25
• /
• 2000

Ion current in an S.I engine cylinder is measured with the spark plug as a probe. The peak values are confirmed to show a fair correlation with local air-fuel ration and engine speed which implies that the ion current measured at the spark plug may provide a signal for the local mixture strength which is the key parameter in precise fuel control for future engines especially of gasoline direct-injected lean burn engines.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.805-806
• /
• 2010

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.190-198
• /
• 1997

Traction control systems are used to prevent the wheel slippage and to maximize the traction force. A new scheme of controlling the wheel slip during cornering by varying the slip ration as a function of the slip angle is proposed and dynamically simulated with the model of a front wheel driven passenger vehicle. Simulation results show that the proposed scheme is superior to conventional ones based on the fixed slip ratio during cornering and lane changes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.208.1-212
• /
• 1997

In this paper, a computer simulation tool for evaluting integrated engine/transmission control system using MATLAB/SIMULINK is investigated. Since a modular programming technique based upon the object-oriented programming is used in the paper, the simulation tool developed reduces the burden of model complexity by dividing engine/transmission systems into hierarchical subsystem. Furthermore, it also provides user -friendly, reusable, and upgradable characteristics of the system. The simulation tool could be useful to the automotive engineers who frequently change models and develop new systems in the automotive powertrain and control area.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.816-819
• /
• 1996

This paper focuses on development of simulation model for SAE J1850 and performance evaluation of a J1850 network. The simulation model has been developed by using discrete event simulation language. SAE J1850 is one of Class B network protocol for general data sharing applications. Through numerous simulation experiments, several important performance factors such as the probability of a successful transmission, average queue delay, and throughput have been evaluated.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.319-322
• /
• 2002

In this Paper, we suggested the Half-Bridge inverter for the automotive HID electronic ballast. electronic ballast for automotive HID lamp should be supplied by low-frequency square wave avoiding the acoustic resonance(11kHz ∼ 825kHz). When the HID lamp is hot state, the electronic ballast should supply the sufficient current for a few milli-second to the lamp at the re-strike ignition state. that is called take-over current. We have introduced the new take-over current control method that could have reduced the peak current and supplied the sufficient take-over current.

• Journal of the korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.1-12
• /
• 1986

대기오염의 역사는 산업의 발전과 그 맥락을 같이 한다. 자동차가 대기오염의 한 Source로 주목 을 받기 시작한 것은 1940년대초 LA의 극심한 Smog발생의 원인을 찾으면서 부터이며, 1950년대 에 와서 Haagen Smit박사에 의해 Photo Smog의 Mechamism이 해석되면서 Smog를 유발하는 HC, NOx는 자동차 배출 Gas가 50% 이상을, 유해한 CO는 90%이상을 기여한다는 것이 파명되 어, 1965년 미국 California주에서 자동차에 대한 배출 Gas규제가 최초로 시작되었다. 자동차 배출 Gas로서 규제대상은 HC(타화수소), CO, NOx(질소산화물)이며, 엔진 Crankcase Emission(Blow-by Gas), Tail pipe로부터 배출되는 Exhaust Emission, 그리고 연료 Tank, 기 화기등의 연료계로부터 배출되는 Evaporative Emission에서의 HC, CO, NOx 각 상한치를 규제 하고 있다.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.30-38
• /
• 1991

자동차의 제동장치, 조향장치, 자동 변속장치 등에 요구되는 큰 힘을 얻기 위하여 유압식 구동장치가 중량당 출력비가 높고 응답특성이 좋으며 과부하에 대한 방지기능이 간단하게 이루어 진다는 장점이 있기 때문이다. 본 고에서는 우리나라에서도 전자제어식 제동장치, 조향장치, 자동변속장치, 현가장치 등의 개발을 시도하고 있는 현 시점에서 기술축적이 가장 취약한 분야라고 볼 수 있는 자동차용 전기유압밸브의 기본적인 메카니즘에 대하여 종합적으로 소개하고자 한다.

• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.1
• /
• pp.1-4
• /
• 1982

우리가 흔히 쓰는 관리도에도 X over bar-R관리도, P(또는 Pn)관리도, C(또는 U)관리도가관리 도의 대종을 이루고 있다. 그러나 기계공업 특히 자동차공업분야에서는 기계가공 부품을 일일이 재기가 어렵거나 시간이 걸리므로 고-노고우 게이지(go-no go gauge)를 써서 선별하는 경우가 많다. 또 금형베품의 조립시에는 측정개소가 많기 때문에 어느 한 부분만을 제어서 관리할 수 없으므로 여러곳을 제어서 관리해야 하는데 이때 금형전체를 어떻게 맞출것인가, 혹은 제품의 공차관리를 어떻게 해나갈 것인가 하는 문제가 생긴다. 다음에 이러한 경우에 유용하게 쓰일 수 있는 관리도의 예를 소개하고자 한다.