• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1949-1951
• /
• 2003

본 논문에서는 수신 측에서 Digital Beam Forming 기술을 응용한 새로운 개념의 차량 충돌 방지용 레이더를 소개한다. 이는 기존의 기술보다 더 넓은 범위에서 차량 탐색이 가능하고, 고해상도를 가지면서, 한 측정 단위 셀 내에서 여러 개의 물체를 찾아낼 수 있다. 제안된 방법은 기존 차량충돌 방지용 레이더의 송수신 안테나에 있어서의 많은 제약을 극복할 수 있는 방법이다.

• Journal of Sensor Science and Technology
• /
• v.20 no.4
• /
• pp.243-248
• /
• 2011

The purpose of this study is to develop a sensing system to measure the capacitance of a pre-developed engine oil deterioration detection sensor integrated with an oil filter. To measure the capacitance of engine oil in the sensor, it is used the way measuring the electric charging time in a capacitor by impressing DC volt. This method has merits on cost and signal stability. The measured capacitance is compensated by comparison with the one measured by an impedance analyzer. Also, using the dielectric constant gained by an impedance analyzer, the calculating equation of the dielectric constant of engine oil related with the currently developed sensor is decided. Finally, the degradation degree of engine oil is estimated according to the change rate of dielectric constant between green oil and used oil. The newly developed personal controller is to control a series of the processes.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.278-279
• /
• 2006

The increasing demand for automotive industries to reduce the weight of the vehicles has led to a growing usage of Al alloy powder metallurgy (P/M) parts. In order to control the sintered microstructure and mechanical properties of the aluminium alloy powder metallurgical (P/M) parts, it is essential to establish a fundamental understanding of the microstructural development during the sintering process. This paper presents a detailed study of the effect of temperature and initial starting materials on the evolution of microstructure during the sintering of Al-Cu-Mg-Si blends for PM.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.41-42
• /
• 2014

본 논문에서는 종전의 3상 PWM 정류기의 문제점을 극복하기 위하여 3상 Z-Source PWM 정류기를 제안하였다. 제안된 정류기는 시스템의 간소화, 안정화, 비용상승을 고려하여 상태관측기가 적용된 센서리스 제어 기법을 적용하였다. 3상 Z-Source PWM 정류기는 교류측 전압센서 없이 DC-link단 전압센서와 입력단 전류 센서만을 이용하여 교류측 전압을 추종한다. 제안된 3상 Z-Source PWM 정류기는 PSIM 시뮬레이션을 통하여 검증 하였다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.532-533
• /
• 2012

3상 전류형 인버터는 3상의 전류원을 정류하여 직류로 내보내는 대표적인 전력변환시스템이다. 3상 전류형 컨버터의 효율을 극대화 시키는 연구가 활발히 진행되고 있는 현재 시점에 스위칭시퀀스를 간략화 하여 스위칭횟수를 감소함으로써 스위칭 손실 저감시킴은 전체 시스템 효율에 긍정적인 영향을 미친다. 본 논문에서는 3상 전류형 컨버터의 기존 스위칭시퀀스를 간략화 함을 통해 스위칭 절환을 최소로 하는 3상 전류형 컨버터의 제어기법에 대해 제안을 하며, 그 유효성을 PSIM 시뮬레이터와 실험을 통해서 검증한다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.228-229
• /
• 2012

3상 전압형 인버터는 직류전압을 전원으로 하여 3상 교류로 내보내는 대표적인 전력변환시스템이다. 3상 전압형 인버터의 효율을 극대화 시키는 연구가 활발히 진행되고 있는 현재 시점에 스위칭횟수는 전체 시스템 효율향상에 큰 영향을 미친다. 본 논문에서는 3상 전압형 인버터의 기존 스위칭시퀀스를 탈피하여 간략화 스위칭시퀀스 전략을 도입하여 스위칭손실을 저감시킬 수 있는 3상 전압형 인버터의 SVPWM 제어기법을 제안하고, 유효성을 시뮬레이션 및 실험을 통해서 검증한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.6
• /
• pp.90-97
• /
• 2010

In order to understand the biomaterial like the blood vessel of artery, there is a need to quantify the biomechanical behavior of the vessel. Using computer-controlled experimental system, the experiment can acquire data such as inner pressure, axial load, diameter and axial gauge length without contacting the specimen. Rubber-liked material which is similar to passive artery was selected as pseudo-biomaterial. Deformations are measured for pressure-diameter curves. The data were collected and stored online to be used in the feedback control of experimental protocols. Finally, the illustrative data obtained from the experimental system were presented and the system shows that strain invariants are controlled to understand the nonlinear elastic behavior of biomaterial which is involved with strain energy function.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.193-199
• /
• 2014

The series connected battery cells are mainly used in high voltage battery pack application. However parameter inequality of each battery cell makes battery voltage imbalance problem. In this paper, a new balancing circuit utilizing converter scheme for the series connected battery cells is proposed. Proposed circuit offers easy control and fast equalization time. Moreover the circuit can be used in a practical application because it has high modularity and can operate during the charging/discharging cycle. To show its superiorness and effectiveness, the principle of proposed circuit is explained with computer simulation and experiment is carried out using lithium-ion battery.

• Journal of Welding and Joining
• /
• v.31 no.6
• /
• pp.107-111
• /
• 2013

The welding distortion is caused by welding heat in the structures which are widely used in shipbuilding and automotive industries, thus many researchers have proposed such methods to control the welding distortion through trials and numerical studies. The welding distortion has been the main cause of low productivity due to the structural strength degradation, apparent flaw, additional deformation caused by the process followed the current assembly step, and the increase of correction workload. The deformation of fillet welding is investigated in this study, and the influence of the rib height on the welding distortion is verified through the actual experiment. And the numerical analysis model using the FE software MSC.marc for analysis of welding distortion is proposed.

• Journal of Surface Science and Engineering
• /
• v.34 no.4
• /
• pp.327-336
• /
• 2001

The skinpassing conditions such as roll type, roll force and roll roughness of the work roll were evaluated to give the surface properties of the galvanized steel sheets that were required for automotive and to get rid of the surface defects that caused with the bad control of galvanized coating process parameters. The surface defects of the galvanized steel sheets such as the ripple mark and the scratch were completely removed as the roll force of SPM work roll was increased and the amount of the transfer of roll surface texture to the strip was also gained a lot. The image clarity of electro discharge textured (EDT) coated steel sheets before and after painting was higher than that of the bright (BRT) and shot blasted (SBT) coated steel sheets because of higher PPI value, lower waviness and uniform surface pattern. Since micro-craters transferred on the surface of the galvanized steel sheets played a role of nucleation sites of chromate reaction, Increase of micro-craters was bring to better corrosion resistance with the increase of the roll force and the use of EDT roll at the skin pass mill.