• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.2
• /
• pp.84-89
• /
• 2009

This paper describes the development tool for applications of automotive electronic control unit based on OSEK/VDX. This development tool has a plug-in structure and is written in Java language, because of being based on Eclipse CDT. And also this development tool has another functionality of expansion, which means a special function block can be easily adopted in this development tool. Currently, this development tool consists of five blocks, which are integrated development environment block, fusing program block, system generation block, debugger block, and cross-compiler toolchain block. They have relationship between each other and work for developing OSEK/VDX-based applications. In this paper, we show the functionality of each block of this development tool and its implementation.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.130-138
• /
• 2002

This paper presents the modeling and analysis of dynamic characteristics of hydraulic snubber in electric power plant. The nonlinear state-space model of 14th order to describe the dynamics of the snubber was established by Simulink. The simulation results show that the hydraulic snubber reacts as like the conventional shock absorbers against the high pulse shock load. The snubber also shows the peculiar characteristics to the small step load, which temporarily lock the control valves up, however maintain same steady-state pressures of all internal chambers in the long run. Two case studies for the analysis of the snubber were addressed. Practical pulse testing method was also proposed to identify the frequency response characteristics of the snubber.

• Journal of Mechanical Science and Technology
• /
• v.17 no.5
• /
• pp.698-707
• /
• 2003

A new quadratic response surface modeling method is presented. In this method, the incomplete small composite design (ISCD) is newly proposed to .educe the number of experimental runs than that of the SCD. Unlike the SCD, the proposed ISCD always gives a unique design assessed on the number of factors, although it may induce the rank-deficiency in the normal equation. Thus, the singular value decomposition (SVD) is employed to solve the normal equation. Then, the duality theory is used to newly develop the conservative least squares fitting (CONFIT) method. This can directly control the ever- or the under-estimation behavior of the approximate functions. Finally, the performance of CONFIT is numerically shown by comparing its'conservativeness with that of conventional fitting method. Also, optimizing one practical design problem numerically shows the effectiveness of the sequential approximate optimization (SAO) combined with the proposed ISCD and CONFIT.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.7
• /
• pp.1039-1046
• /
• 2001

Among the automotive steering systems, an Electric Power Assisted steering (EPAS) system utilizes an electronically controlled electric motor to provide steering assistance to the driver. The key components of the EPAS system are torque sensor, ECU (Electronic Control Unit), and DC Motor. The most important component of the EPAS is the torque sensor. The conventional torque sensor has complicated mechanical mechanism of torque detection. However, we suggest a non-contact torque sensor for EPAS using Maluss polarization law. It was found that the sensor exhibited not only excellent linearity but also superior characteristics of hysteresis, temperature and vibration.

• Journal of Korea Multimedia Society
• /
• v.21 no.9
• /
• pp.1099-1109
• /
• 2018

Most of the automotive electronic systems are equipped with control software. ISO 26262 standard has been published to prevent unreasonable risk due to E/E system malfunction. And many automotive companies apply ISO 26262 for safe series product. In ISO 26262 standard, the product quality improves through deductive and inductive safety analysis in all processes including system and software development phase. However, there are few studies on software safety analysis than systems. In the paper, we study the software FMEA(Failure Mode Effect Analysis) technique for product quality of vehicular embedded software. And we propose an effective guideline of software FMEA as EPB industrial practice.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.92-101
• /
• 1996

In a gasoline engine, the characteristics of air flow is very important not only for the design of the intake system geometry bout also for the accurate measurement of the induction air mass. In this study, an air flow rate measurement of the induction air mass. In this study, an air flow rate measurement was conducted by using the hot wire flow meter at the upstream of the intake port and the throttle. At the upstream of the throttle, the overshoot phenomena of the air flow rate by fast throttle opening were analyzed with choked flow. At the upstream of the intake port, the cylinder variation of the air flow rate and the difference between fast throttle opening and closing were showed during the unsteady state by the throttle step change. The results of this study can be used for the design of the throttle valve geometry and cylinder by cylinder control.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.3
• /
• pp.95-108
• /
• 1993

The needs for smooth curves and surfaces are increasing in modeling cars, ships, airplanes, and other consumer products either for aesthetic or functional purpose. However, the curves and surfaces generated by conventional modeling methods usually exhibit an unwanted behavior due to digitizing errors or inadequate generation method, and thus much time and extra effort is spent afterwards to get the faired results. The objective of this work is to develop a fairing scheme by which well refined shape of a surface can be acquired with detecting and removing the shape imperfections of the given surface represented by NURBS. The fairing scheme is based on an optimization process in which the control points of the given surface are repositioned to minimize the integration of the jumps(perturbations) of the unit normal vectors at all surface points.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.3
• /
• pp.55-62
• /
• 1993

Autoregressive moving average(ARMA) model which is a time domain parametric modeling method is implemented for modeling and reproducing characteristics of exhaust noise of an automobile in various RPM range. Experiments have been carried out using 9 set of exhaust noise signals measured at 1,000-3,000 RPM range. Characteristics of sampled signals were estimated using ARMA modeling and Akaike's FPE(final prediction error) criterion to define exact model structure and for model validation. The digital filter consisted of the esitmated ARMA(70,1) model parameters was programed to reproduce exhaust noise. The spectral analysis of reproduced noise is very close to original. The results show that our approaching technique for reproducing acoustic characteristics is valid and feasible to apply in the field of noise quality control.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.67-73
• /
• 2010

In this study, a camber angle generating mechanism for rear suspension is suggested. An experimental device is implemented and tested. A full vehicle model with camber angle generating device by using ADAMS/Car is modeled. Rear left wheel and rear right wheel have 5 different camber angles in the simulations, respectively. Step steer and pulse steer simulations are carried out for investigating the effects of vehicle handling performance due to camber angle control of rear suspension. According to the results, the camber angle of rear suspension affects the vehicle handling performance during both simulations. Therefore, when the vehicle makes the right turn or left turn, left and right wheel should have the proper orientation for improving the handling performance, respectively.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.115-119
• /
• 2015

Pipe vibration caused great threat to the safety in production. Strong pipeline vibration will line accessories, especially the joints and pipe fittings etc. pipe joints loosening and rupture, causing serious accidents. By the action of the compressor constant fluid flow within the pipe, this process produces pulsating fluid flow may cause vibration of the pipe, thereby reducing the efficiency of the pipeline, structural vibration induced fatigue, thereby resulting in even piping structural damage. This paper studies on the vibration problems caused by fluid, by analyzing the causes of pipeline vibration and factors affecting pipeline vibrations, FEM (Finite Element Method) analysis of modal and enforced vibration.