• 한국안전학회지
• /
• 제13권2호
• /
• pp.3-12
• /
• 1998

Polymer materials have been used offensively as construction materials for automobiles, ships, and airplanes in recent years, and their impact resistance has been obliged to be examined. In the present study, a dropped load and a specimen, equipped with high responsible strain gauges respectively, were dropped and then the changes of load and absorption energy with time were observed. It was found that the waveforms for dropped weight coincided with output signal wave for specimen during the destruction test. Based on this experimental result, three disc type of specimens with different compositions were prepared and examined. This instrumented impact test method showed that each specimen can be distinguished from each other better than conventional tests and is expected to contribute to assess test results of impact resistance for some materials under development.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.28-33
• /
• 2010

Ni alloy steel is able to use during long time because of good acid and corrosion resistance. So, it's research has focused on developing the alternative alloy which is economically feasible. Recently, consumption of Kovar steel is gradually increased in field of the jet engine and the gas turbine because of its low thermal expansive characteristics. The specimens of Kovar steel(29%Ni-17%Co) contain 0.00%C, 0.03%C, 0.06%C, 0.10%C and 0.20%C, respectively. Ingots are manufactured by VIM(vacuum induction melting furnace) and then specimens are made by automatic hot rolling after heat treatment. Strength of Kovar steel according to carbon contents is estimated by hardness, tensile and impact test. Hardness of the 0.20%C specimen is more improved approximately 14.4% than one of base metal. Its strength increases 32.4% of a base metal, and its impact energy is also enhance 11.5%.

• International Journal of Reliability and Applications
• /
• 제15권2호
• /
• pp.151-161
• /
• 2014

Recently, the automotive industry has been introduced to ISO 26262 in November 2011 to address the necessity of safety risk from sensor to actuator by providing guidance in the form of requirements and processes. The malfunctioning behaviour of these systems could have significant impact on the safety of humans and/or the environment. Most of the modern automobiles are equipped with embedded electronic systems which include lots of Electronic Controller Units (ECUs), electronic sensors, signals, bus systems and coding. Due to the complex application in electrical, electronics and programmable electronics, the need to carry out detailed safety analyses which focuses on the potential risk of malfunction is crucial for automotive systems. In this paper, the international trends on pre and post introduction of ISO 26262 through publications will be analyzed as well as to take a glimpse in the activities for implementing this standard by the automotive manufacturers. The issues and challenges which have been occurring from implementing this standard also will be highlighted.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1998년도 추계학술대회 논문집
• /
• pp.83-86
• /
• 1998

In many industries, competitive advantage is rapidly shifting to the management of suppliers. Especially, in the automotive industry, suppliers' manufacturing performance influences the quality of automobiles which are assembled by motor companies. This study seeks to identify dominant types of buyer-supplier relationships and to examine suppliers' performance difference according to types of buyer-supplier relationships. The findings indicate that the supplier's production performance in the cooperative relationship is higher than that of the suppliers in the other relationships. And then this study examines the relationships between interfirm asset specificity and suppliers' performance. The findings indicate that the greater the interfirm human asset cospecialization and physical asset specialization, the higher the supplier's market and production performance.

• 경영과학
• /
• 제16권1호
• /
• pp.115-135
• /
• 1999

In many industries, competitive advantage is rapidly shifting to the management of suppliers. Especially, in the automotive industry, suppliers' manufacturing performance influences the quality of automobiles which are assembled by motor companies. This study seeks to identify dominant types of supplier relations and to Examine suppliers' performance difference according to types of supplier relations. The findings indicate that the supplier's production performance in the cooperative relationship is higher than that of the suppliers in the other relationships . And then this study examines the relationships between interfirm asset specificity and suppliers' performance. The findings indicate that the greater the interfirm human asset cospecialization and physical asset specialization, the higher the supplier's market and production performance.

• 한국대기환경학회지
• /
• 제8권4호
• /
• pp.229-239
• /
• 1992

A receptor model application was performed by using a chemical mass balance (CMB) model to identify and apportion the specific source of airborne organic pollutants, particularly polynuclear aromatic hydrocarbons (PAHs). Source profiles of PAHs produced from the combustion of fossil fuels for CMB modeling were prepared by measuring them in emission gases. The emission sources which were examineed for the development of PAH source profiles are a coal-fired furnace using Yontan, a bunker-C iol heating boiler, and gasoline-and diesel engine automobiles. The ambient concentrations of PAHs were determined at four sites in Daejon city in 1991 with a seasonal variation. Wintertime air samples contained more extractable organic matter than summertime samples. The results of CMB modeling were various depending on the sampling sites and seasons, but the emission from bunker-C oil heating boliers was the predominant factor to affect local air quality throughout the year.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1073-1075
• /
• 2001

The nitrogen oxides, NO and NO2, abbreviated usually as NOx, emitted from combustion facilities such as power plants and automobiles are the typical air-pollutants causing acid rain and photochemical smog. In order to solve the NOx-related pollution problems effectively, we need efficient techniques to monitor NOx in the combustion exhausts and in environments. Development of solid-state electrochemical devices for detecting NOx is demonstrated based on various combination of solid electrolytes and auxiliary sensing materials. The object of this research is to develop various sensor performance for solid state amperometric sensor, and to test gas sensor performance manufactured. So we try to present a guidance for developing amperometric gas sensor. We concentrated on development of manufacturing process and performance test.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.219-221
• /
• 2006

In an attempt to optimize friction spot joining process of Al alloys for automobiles, Friction spot joining was used make lap feint on strips of AA5052-H32 and AA6022-T4 aluminium alloy. The effects of joining parameters such as tool rotating speed, plunging depth, joining time and kind of upper plate on the joints properties were investigated. An optimal tensile shear strength parameter of a tool rotating speed of 1000rpm, dwell time 2.5sec with upper plate 6022 can be found to make a good joint.

• 대한교통학회지
• /
• 제4권2호
• /
• pp.15-35
• /
• 1986

As the population of persons and automobiles rapidly grows, parking problems also grow in large cities of Korea. The purpose of this paper is to first grasp the status of parking facilities and characteristics in large cities of Korea; and introduce new directions of CBD parking policies in north America cities: and finally recommend the adequate parking management strategies and tactics for improving parking problems in Korea. For this purpose, field survey for parking inventories, patrol survey for parking usage as observed demand and drive interview survey for parking behavior were conducted. Compared with the parking characteristics and polices of foreign cities, many differences of characteristics were found, and existing parking management policies, which should be improved, were identified. Five categories of parking management strategies were set on; a) Reasonable control of CBD parking demand, b) securing of the public parking facilities c) Promotion of privately operated parking facilities d) expansion of financial resources for parking facilities construction and e) Improvement of existing parking management system. And actural seventeen tactics to attain the above strategies were recommended.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.80-85
• /
• 2003

This research represents enhancement of forgeability of SNCM522H steel. Output Shaft (OP Shaft) has been used as a subject for the study. OP Shaft is used as component of power train for automobiles. To develop I pass cold forging process instead of existing 2 pass process for OP Shaft, studies in terms of process design and heat treatment were performed. To verify the new process, CAE simulations were performed. And hardness test, microstructural analysis and tensile tests after heat treatment were carried out to evaluate the validity of proposed heat treatment cycle. The 2 pass forging process could be reduced as 1 pass process through improvement of process and heat treatment cycle.