• Fire Science and Engineering
• /
• v.28 no.4
• /
• pp.1-7
• /
• 2014

Several complex devices and equipments are installed in the car's engine room, including various kind of oils or other flammable materials. So re-ignition is very likely to take place in it. In addition, it is restrictive for the driver or the occupant to open the bonnet and to spray the fire extinguisher in the engine room due to the high possibility of explosion. Therefore, a fire extinguishing system, which can detect a fire and inject the fire extinguishing agent to extinguish it, and fire extinguishing agents including HFC-227ea, which can stand the high temperature within the engine room and hold the viscosity sufficient to keep it in the kind of foam, were developed and tested. And the suffocation effect and the cooling effect come from the fire extinguishing principle of the foam fire extinguishing agent and the inhibiter catalyst effect come from the one of HFC-227ea was led simultaneously, and fire extinguishing agents without the secondary damage caused by residuals after the fire extinguishment like a case of the powder fire extinguishing agent, were developed. And experiments using a vehicle collision after the discharge is complete, foreign material can be removed without extinguishing the advantage that experimental results obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.52-60
• /
• 2018

In the automobile industry, in order to increase the fuel efficiency and conform to the safety regulations, it is necessary to make the vehicles as light as possible. Therefore, it is crucial to manufacture dual phase steels, complex phases steels, MS steels, TRIP steels, and TWIP from high strength steels with a tensile strength of 700Mpa or more. In order to apply ultra-high tensile strength steel to the body, the welding process is essential. Resistance spot welding, which is advantageous in terms of its cost, is used in more than 80% of cases in body welding. It is generally accepted that ultra-high tensile strength steel has poor weldability, because its alloy element content is increased to improve its strength. In the case of the resistance spot welding of ultra-high tensile steel, it has been reported that the proper welding condition area is reduced and interfacial fracture and partial interfacial fracture occur in the weld zone. Therefore, research into the welding quality judgment that can predict the defect and quality in real time is being actively conducted. In this study, the dynamic resistance of the weld was monitored using the secondary circuit process variables detected during resistance spot welding, and the factors necessary for the determination of the welding quality were extracted from the dynamic resistance pattern. The correlations between the extracted factors and the weld quality were analyzed and a regression analysis was carried out using highly correlated pendulums. Based on this research, a regression model that can be applied to the field was proposed.

• Science of Emotion and Sensibility
• /
• v.13 no.2
• /
• pp.381-390
• /
• 2010

The automotive seat comfort evaluation was to begin a key aspect in seat design. It depended largely on the basic mechanical aspect such as geometric parameters of seat, choice of suspension system and cushion material used. Until recently, seat comfort evaluation advanced to evaluate subjective sensitivity of human. The external literatures showed in the last decade, there have been very few attempts to establish and document automotive seat comfort evaluation. In 2006 Smith, D. proposed the statistically reliable tool in giving a numeric rating for set comfort and the tool was used in the many country. On the other hands, we, in Korea, had not the reliable tool for the automotive seat comfort evaluation. So that, we studied to develope the questionnaire for seat comfort evaluation based on Smith, D.(2006) and some studies. As a result, we developed 36 contents for the automotive seat comfort evaluation with the help of professional in Korean automotive industry. Here, 36 contents were identified as the dimensions that represent the human sensitivity and psychological feeling on comfortable seat. Also, we derived the priorities for the 36 contents by using analytic hierarchy process (AHP), based on the judgments of 30 experts and drivers. This study will help the designers and developers clarify the conceptual and abstract aspect of the design evaluation by proposing a more systematic and process-oriented method.

• Journal of the Korean association of regional geographers
• /
• v.10 no.2
• /
• pp.428-446
• /
• 2004

This paper is to analyze citizens' consciousness on urban changes during the 1900s in the sectors of economy, politics and socio-culture of large cities in Korea, especially comparing them in Seoul, Daejeon, Daegu, and Kywangju. The items of questionnaire are drawn from theories on each sector of new urbanization of large city in Western countries, that is, that of post-Fordism, of urban governance, of post-modernism, and of sustainable city. Some major findings of this questionnaire analysis are as follows. First, on the change of large cities in general, citizens think that the sectors of spatial structure, and of socio-culture of the cities were changed more than those of urban economy and of urban politics. Secondly, in the sector of urban economy, citizens recognize that the obstructing factors of development, that is, the lack of regional capital and the absence of head-quarter of large firms, which seems to be resulted from uneven regional development in the previous periods were much more serious than others, while acknowledging the importance of high-tech industry. Thirdly, in the sector of urban politics, citizens think that the centralized structure of politics and of political parties was still problematic, while acknowledging the importance of entrepreneur mind of urban governor. Finally, in the sector of urban socio-culture, citizens emphasize the development of telecommunication, the popularization of private automobile and the increasing use of credit card, as three major factors which have exercised major impacts on the development of urban socio-culture.

• Resources Recycling
• /
• v.23 no.2
• /
• pp.3-16
• /
• 2014

Car exhaust $CO_2$ gas reduction and fuel efficiency of the car lighter for the current era is a big challenge. The developments of high-performance Nd magnets, Li-ion secondary battery and exhaust gas purification performance of PGM catalysts used in the lightweight EV and HEV are activated. Country in order to improve the car lighter and function that use the resources of rare metals are ubiquitous imported from China because of export supply control, as soaring prices have unstable supply and demand. Compared to the emissions from the next-generation automotive recycling, waste scarce resources need to be. This study investigated the recycling technology analysis and development of the information technology, or delivered to the researchers by giving national car industry aims to contribute to the development. Findings, pulmonary high-performance motor vehicle emissions in the exhaust gas purification PGM Catalysts, Li-ion battery and Nd magnets recycling technology, such as pre- and post-processing techniques to classify technology, pre-urban mining technology mechanical separation by screening techniques under development, the study and post-processing technology has, pyro and hydro metallurgical smelting technology is established. Waste Recycling in terms of economic efficiency of mechanical components for the intensive study of screening techniques is needed.

• Korean Journal of Occupational Health Nursing
• /
• v.9 no.1
• /
• pp.5-17
• /
• 2000

The occupational health nursing guideline for primary care was developed by the Korean Academic Society of occupational health nursing and the organization for occupational health nurses (currently known as the Korean Association of Occupational Health Nurses) in 1993. Since then, there have been many changes in the health care environment and job performance of occupational health nurses. Appropriate revisions are necessary of the guidelinea based on this background. The purpose of this study was to describe the use of the occupational health nursing guideline for primary care and to analyze the characteristics of primary care activities by occupational health nurses. The questionnaire was mailed to 150 occupational health nurses(OHNs) with the response rate of 64%. The results can be summarized as follows; 1. 65.6% of OHNs have been using the guideline for primary care and 75.9% of them agreed that the guideline was be helpful for their job. 2. Common symptom care, emergency care and chronic illness care were more frequently implemented than occupational disease care by OHNs. In manufacturing industries, emergency care was more frequently implemented than chronic illness care in contrast to the service industries. 3. Most frequent common symptoms treated by OHNs were indigestion, diarrhea, abdominal pain, headache, and coughing. In the case of chronic illness, OHNs more frequently treated diseases of the gastro-intestinal system, skin and sensory organs, and the respiratory system. Emergency care for bruises, burn, and abrasions was more frequently provided. VDT syndrome was the most common occupational disease cared by OHNs in manufacturing and service industries. 4. OHNs prescribed the medicine for external application more frequently than internal medicine. Remedy for colds, analgesics, vitamins, and digestives were more frequently used. From these results, we suggest that the guideline should be revised to emphasize the activities consisting problem finding such as health assessment, physical examinations, monitoring and screening, and to renew the drug list in the range of over- the counter medication (OTC). In the future, the guideline will include the strategies for the role as the case manager.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.25-35
• /
• 2011

Traffic volume increases due to diversification of industry. Also, Automobile ownerships also increase steadily. It is estimated that the registered number of vehicle is expected to be 20 milion in the year 2015. These trends may result in increasing the number of woman drivers and elderly drivers. Therefore, this study aims to identify routes that reflect characteristics of each driver's preferences. A survey was conducted on different routes attributes for variances drivers. Driver types were classified by gender, age, and driving career. Accordingly, a weight for road composition attribute such as number of lanes, number of accidents, slope was estimated by using Swing Weighting technique in Multi-Attribute Utility Theory. In addition, a case study was conducted and identified weights were applied to routes. In result, drivers commonly prefer short route when they considered their routes. Also, male drivers prefer speedy and shorter route than that of female drivers. Elderly drivers prefer safe routes that represent low accidents rate. Moreover driving career under a year drivers prefer safe and easy routes. Therefore, we may conclude that the necessity of diversified route information is essential in the future car navigation system.

• Composites Research
• /
• v.31 no.4
• /
• pp.122-127
• /
• 2018

Sandwich composites of carbon fiber reinforced plastic(CFRP) and polymer foam will be used to automobile and aerospace industry according to increasing importance of light weight. In this study, mechanical and heat resistance properties of sandwich composites were compared with type of polymer foam (polyethylene terephthalate(PET), polyvinylchloride(PVC), epoxy and polyurethane). All types of polymer foams were degraded to 30, 60, 120, 180 minutes in $180^{\circ}C$. After heat degradation, the polymer foams were observed using optical microscope and compressive test was performed using universal testing machine(UTM). Epoxy foam had the highest compressive property to 2.6 MPa and after thermal degradation, the mechanical property and structure of foam were less changed than others. Epoxy foam had better mechanical properties than other polymer foams under high temperature. Because the epoxy foam was post cured under high temperature. As the results, Epoxy foam was optimal materials to apply to structures that thermal energy was loaded constantly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.363-368
• /
• 2016

In safety-critical systems (SCS), failure may result in accidents with serious damage to human beings and property. As systems become more complex and automated, the goal of acquiring safety has attracted increasing attention lately in the defense industry, as well as the rail, automotive, and aerospace industries, among others. As such, the Department of Defense and international organizations have established appropriate standards and guidelines for systems safety and design. To this end, there has been research on the processes, methods, and associated tools for safety design. However, those results do not seem to sufficiently utilize system architectural information. The purpose of this paper is to provide a more systematic approach to SCS design. To better identify potential hazards, design information at each level of system hierarchy is exploited. Based on the results, an integrated process model was developed by combining the processes of system design and safety analysis. As a case study, the resultant integrated process model was applied to the safety design of an automobile system, which shows useful results for safety evaluation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.628-637
• /
• 2017

The automobile industry has developed Advanced Driver Assistance Systems (ADASs) to prevent traffic accidents and reduce the burden for drivers. One example is the Lane Keeping Assistance System (LKAS), which was developed for automotive vehicle systems for safety and better driving. The main system of the LKAS supports the driver while maintaining the vehicle within a lane. LKAS uses a radar sensor and camera sensor to collect information about the vehicle's position in the lane and send commands to the actuator to influence the lateral movement of the vehicle if necessary. Recently, vehicles equipped with LKAS have become commercially available. Test procedures for international LKAS evaluation are being discussed and developed by international committees, such as the International Organization for Standardization and United Nations Economic Commission for Europe. In Korea, an evaluation of LKASs for car safety is being planned by the Korean New Car Assessment Program. Therefore, test procedures should be developed for LKASs that are suitable for the domestic road environment while accommodating international standards. We developed a test scenario for LKASs and propose a formula for obtaining the target relative distance. To validate the methods, a series of experiments were conducted using commercially available vehicles equipped with LKAS.