• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.76-81
• /
• 2011

Fossil fuel, the energy source of internal combustion engine automobiles, is limited in resource and has caused environmental issues for decades. Accordingly, automobile manufacturers from many countries around the world are developing or producing eco-friendly vehicles that utilize alternative sources of energy. These vehicles are equipped with many electronic and electrical components which operate on high voltage and/or large current that were not used in conventional combustion engine automobiles. In this paper, in order to analyze the electro-magnetic interference noise, electric vehicles and fuel cell electric vehicles are tested under the guidelines of KMVSS (Korean Motor Vehicle Safety Standards) as well as under test modes that are not stipulated under the guidelines.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.669-671
• /
• 1998

Engine immobilizer is the automobile security system which disables the engine if the secrete code in the transponder embedded in the key knob is not in agreement with the code in ECU of the car. There are many types of immobilizer systems, however, the encryption transponder type system is the most secure system due to the code verification method using an encryption method. As an example of the industry-university cooperation, the software development in the system is introduced in this paper.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.942-948
• /
• 2011

The performance of a supercharger for vehicle using solar cell attached on the exterior of a car, an auxiliary battery, and an air compressor was evaluated in this study. This supercharger is composed of a solar cell of 40W, a battery of 60 Ah, an air compressor of 17 A, 8 $kgf/cm^2$ and an air tank of 8L. It takes about 6 days to charge the battery with the solar cell and the high pressure air of 8L can be supplied about 70 times to engine intake with this battery. The intake pressure increased by about 20~40% with this supercharger. The vehicle power and accelerating performance are enhanced by 87% and 50% each in the low speed range. But the performance improved little in the high speed range because of the rather constant flow rate of air supplied by this type of supercharger.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.661-665
• /
• 2005

The muffler reducing the exhaust noise and vibration from the engine influence on the engine performance. Recently the semi-active muffler was developed and adopted to the actual use in consideration of the cost and technical side for noise and vibration. This study is about the recently developed semi-active muffler. This paper attempt to analyze the dynamic stress field on the gate plate by using the finite element methods. According to the analysis of the Exhaust Variable Valve, its spring has the most influence on its operation compare with effects of other components. The design parameters of the Exhaust Variable Valve such as the spring displacement, diameter, coil number, free angle and so forth were used.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.219-226
• /
• 2000

Frictional performance of ring pack in internal engine is investigated by varying spatial dimensions of ring pack and operating speed. This investigation is performed with commercial software by Ricardo Consultant Engineers, Inc. which is now in wofdwide use in automobile industries. Among the ring performances, blow-by rate, axial ring motions and frictional behaviors of top and second rings are studies in our work.

• 음성과학
• /
• 제9권3호
• /
• pp.61-73
• /
• 2002

We collect the Korean Database which can be trained for the speech recognition engine in an automotive environment. We describe the overall trends of the Korean database collections in this paper and suggest a database collection method for the speech recognition system of the car-kit and explain several conditions in collecting the database in the automotive environments. Finally, we expain an effective method of the Korean database collection in the automobile and the results of the database colletions, and the devised softwares used for the collection of the database.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.185-188
• /
• 1995

In this paper, We have analyzed dynamic characteristics of cutting force. Test materials are used in the tempered carbon steek and non-tempered carbon steel. The obtained results ase as follows: 1. Cutting force is smaller non-tempered carbon steel than tempered carbon steel when feed speed make a change. 2. Specific cutting force is smaller non-tempered carbon steel than tempered caron steel when cutting depth make a change

• 기계저널
• /
• 제36권1호
• /
• pp.41-51
• /
• 1996

가스터빈에 대한 연구는 선진국에서 우주항공의 기술경쟁과 함께 활발히 진행되어져 왔을 뿐만 아니라 이들의 핵심기술은 방위산업으로 활용되어지기에 국가적인 지원하에 연구가 수행되어져 왔다. 그러므로 이것에 관한 기술은 해외로의 유출이 원천 봉쇄되어졌다. 하지만 이들의 기술이 발전용 및 운송용 등의 일반산업에 점차적으로 활용됨에 따라, 이에 대한 연구가 국재에서도 활발히 진행되고 있다. 특히 국내의 실정으로는 엄청난 투자비가 들어가는 대형 시스템보다는 개발의 위험도가 적은 터보-제너레이터의 개발이 시기 적절한 프로그램이라 하겠다. 현재 세계적인 환경규제 추세와 2000년대 세계 5위의 자동차 생산국으로서 해외 선진국과의 기술경쟁에서 뒤지지 않기 위해서는 이러한 연구를 수행하여야 한다.

• 소음진동
• /
• 제8권1호
• /
• pp.112-121
• /
• 1998

In this report, Experimental analysis for main factors and analyzing methods of electro-magnetic noise and no loading noise was conducted because of noise of AC generator, which is peripheral equipment by reduction of engine noise that would be the main cause of vehicle radiation noise. In addition, This is intended to suggest the noise reduction development basis of AC generator for actual fan and electro-magnetic noise by making-analyzing-testing it's sample.

• 오토저널
• /
• 제10권3호
• /
• pp.38-44
• /
• 1988

It is important to control the axial forces of high tension bolts such as the automobile, construction machine, aircraft, marine engine bolts. However, the direct method to measure the axial forces of bolts practically have not been found out. The ultrasonic techniques is based on the principles that the bolt tensile elongation and ultrasonic velocity changes are proportional to the axial force below the yield point of the materials. From the result of the experiment, the coefficient of acoustoelasticity k could be measured as - 11.18*10$_{-5}$m $m^{2}$k $g_{f}$./.