• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1035-1047
• /
• 2015

Starting from a new dynamic system description novel synchronous machine deterministic observers are proposed. Reduced and full order adaptive observer variations are presented. Based on the feedback linearization control law and the use of deterministic observer a novel control system is built. It meets the requirements of high performance tracking system. Adaptivity to stator and rotor resistance and the torque sensorless application is included. The comparison of the proposed novel control with conventional linear and nonlinear control systems is discussed. The given simulational study includes complete drive system integration.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.485-491
• /
• 1999

A burr is formed in every corner of parts as a result of machining, which produces undesirable edge geometry and influence deeply to surface quality of workpiece. Therefore these burrs must be removed certainly. The cost of removing these burrs is directly proportional to their size. Burrs have been among the most troublesome obstruction to high productivity and automation of machining processes. The proper selection of cutting condition and tool geometry will be helpful to reduce the occurrence of burrs. In paper will observe burr formation along helix angle in end milling and certificate experimentally mechanics relation of helix angle and burr formation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.560-564
• /
• 1999

Burr sensing for burr size measurement and deburring process control is one of the essential elements in an automated deburring procedure. This paper presents the implementation of capacitance sensing and acoustic emission (AE) to deburring. The first application is the "on-line" measurement of burrs using a capacitance sensor. A non-contact capacitance gauging sensor is attached to an ultra precision milling machine which was used as a positioning system. The setup is used to measure burr profiles along machined workpiece edges. The proposed scheme is shown to be accurate, easy to setup, and with minor modifications, readily applicable to automatic deburring processes. As the second example, AE signals were sampled and analyzed for the sensor feedback of a precision deburring process - laser deburring -. The results, such as the sensitivity of AE signals to burr shapes and edge detection capability show a clear correlation between physical process parameters and the AE signals. A subsequent control strategy for deburring automation is also briefly discussed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.579-584
• /
• 1999

The purpose of the present paper are not to develope machine tools of new concepts and advanced mechanisms but to introduce and apply new methods and concepts in the design procedure by using and changing the previously existing technologies. In this paper 3D modeller was proposed for designing machine tools and the design and the better manufacturability checking than 2D one so that design error was dramatically reduced. As designer may easily understand the real shape of a part and assembly object, it's easy to draw the drawings not only in a conceptual design but also in a detailed design. Also, design automation software enabled designer to consider the real important design parameters by reducing time to spend in estimating and calculating the strength of the model by the computer aided automatic calculation instead of a tedious and complex calculation by manual method and help him to easily make the decision for selecting the stocks and design the structure of part or unit of machine tools.

• The Journal of the Korea Contents Association
• /
• v.6 no.2
• /
• pp.1-8
• /
• 2006

In this paper, we address to develop a port container management system using RFID, which is one of the main technologies in ubiquitous. Our system is designed and implemented based on the following technologies: a port gate automation using RFID for container identification, web programming for both communication of the gate and deposit/delivery of a container, and wireless embedded router technology for both port container network platform and cram terminals. The developed system using RFID will be expected to use in main part of the port logistic management system aimed to the intelligent port.

• Journal of Korean Library and Information Science Society
• /
• v.29
• /
• pp.141-169
• /
• 1998

This paper traces the trends of librarianship and the changes in the education for librarianship during the 1950s through the 1990s. The purpose of tracing is to find out whether there were some relationships between library activities and education for librarianship, which are supposed to be closely linked and cannot be discussed separately. The historical development of the field and the changes of information technology and library education in the United States of America during the same period are described to show how library and information science field has changed and how American library schools, whose system of library education was introduced into this country, have adopted new technologies. The results of the research show that, even in part, there were such relationship between libraries and library education as libraries' interests in library automation and library schools' provision of library automation course. It was also found out that the Korean library schools tended to follow the curricula provided by their American counterparts. Based on the findings, some suggestions are provided.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.328-333
• /
• 2011

A Distribution Automation System (DAS) is operated by monitoring and control of the field statesusing Feeder Remote Terminal Units (FRTUs) installed together withautomatic switches.An optimal placement of automatic switchescan enhanceefficiencyof the operation and restoration, and improve the power supply reliability ofa DAS.This paper proposes an algorithm to decide the optimal placement of automatic switches ina DAS.The proposed algorithm was developed ona DAS witha six sections and three links configuration. The proposed algorithm was provided inaneight-feeder power distribution system.

• Transactions of Materials Processing
• /
• v.21 no.8
• /
• pp.467-472
• /
• 2012

Shaving shear-welding is a solid-state welding process, which utilizes plastic deformation of surplus material. The solid-state nature of this process contributes to high integrity and strength of the weld. The objective of this study was to investigate the effects of process variables on the material flow patterns and identify the process condition for obtaining the best weld. FEM simulations were carried out along with experimental characterizations. The results showed the importance of the cutter angles and the overlap lengths, and helped attain the optimum shaving shear-welding die and the best process condition.

• Journal of Information Management
• /
• v.29 no.2
• /
• pp.37-53
• /
• 1998

The organization of university library is still not corresponding effectively with the infomation age. Therefore, the purpose of this study is to survey and analyze an organizational change which appears in the process of automatization, and to provide of fundamental elements for the efficient management in university library.

• Journal of the Korean Society of Safety
• /
• v.19 no.3 s.67
• /
• pp.118-123
• /
• 2004

The more the lift environment eastern idea, culture, factory automation system and information technology complicates, the more the various human error brings about. It brings about all kind of accidents and occupational diseases. Also the death and sickness or injury by psychological stress among the human error has increased every year. Therefore this paper describes the Korean lift change unit model through statistical testing with the proposed life change unit factors on the married workers living the middle area. The proposed model can be simply used in order to minimize the industrial accident and human error in real fields. Finally, the result will be helpful for the better safety management.