• Journal of the Korea Society of Computer and Information
• /
• v.20 no.12
• /
• pp.53-59
• /
• 2015

In this paper, we developed a Hospital Information System in which the business process is formalized and a wire/wireless integrated solution is used. This system consists of the administration office program, the medical office program, the ward management program and the rounds management program. The administration office program can enroll and accept patients, issue and reissue the RFID card. The medical office program inputs a medical examination and treatment, outputs a diagnosis, requests a hospitalization, retrieves the record of a medical examination and treatment, assigns the corresponding examination room to the accepted patients, and updates the number of an waiting patient and a patient number according to the examination room on real time. The ward management program handles hospitalizations and leaving hospital, a nurse's note, and an isolation ward monitoring. The rounds management program handles a medical examination and treatment, and a leaving hospital using PDA. This developed system can be built at low cost and increase the quality of the medical services highly by making it automated the medical administration automation. Also the small number of the medical staffs can manage the inpatients efficiently by using the monitoring functions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.10
• /
• pp.710-718
• /
• 2010

A numerical study was performed to predict refrigerant charge amount in a mini-channel condenser for a R410A residential air-conditioning system. Multi-channel flat tubes with 12 mini-channels of 1.17 mm average hydraulic diameter for each tube were applied to the condenser. The condenser consisted of 3 passes, and the first, second, and third pass had 44, 19, and 11 tubes, respectively. Each pass was connected by a vertical header. In this study, the condenser was divided into 410 finite volumes, and analyzed by an $\varepsilon$-NTU method. With thermophysical properties and void fraction models for each volume element, the R410A amount distribution and a total charge amount in the condenser were calculated. The predicted total charge amount was compared with the experimentally measured charge amount under a standard ARI A condition. The developed model could predict the charge amount in the mini-channel condenser within prediction errors from -23.9% to -3.0%. Air velocity distribution at the condenser face was considered as non-uniform and uniform by the simulation model, and its results showed that the air velocity distribution could significantly influence the charge amount and vapor phase distribution in the condenser.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.2
• /
• pp.168-178
• /
• 2002

The purpose of this study is to analyze content of curriculum for Office Administration offered in many Secretarial Science & Office-related department at junior colleges. To analyze the curriculum Office Administration, the study focuses on IAAP's contents of Office Systems and Administration and NVQs' contents of Office Administration. which has been selected as a subject for national vocational qualifications in USA and Britain separately. The result of this study are summarized below: 1. IAAP's contents of Office Systems and Administration is divided into two main categories which are an Office Technology and an Office Administration/communication. 2. Whereas, Britain's NVQs contents of Office Administration is divided into 4 parts, which are Basics Concepts in Administrative Office Management, Managing Human Resources, Managing Administrative Services, and Managing Administrative Systems. 3. To provide indepth knowledge of Office automation in today's office environment, the curriculum of Office Administration should include both the theoretical and practical aspects of office works.

• Proceedings of the KWS Conference
• /
• 1994.10a
• /
• pp.89-92
• /
• 1994

According to the industrial development welding technology is necessitated to develop in the direction of full automation, high efficiency, energy saving, and full safety. In this study, thus, a simple holder ampere controller for welding systems is developed and applied to arc welders and its capability is examined and tested. The results are as follows: 1. It has a simple structure, since the primary AC power for the welder can be directly control led using a triac. 2. It can control the electric power strength in several steps as well as on and off easily, since a small-sized variable resistance is installed in the small controller on the welding holder. 3. In real field applications a welding system with this controller increases the working efficiency greatly compare to the conventional arc welders without the system, because the controller can control the ampere onsite far from the main power supply. 4. It can reduce the probability of the electrical mishap due to electrical leakage, since the electricity is disconnected as soon as the switch is off or welding person's hand is taken off from the welder after the work or for rest. 5. It can control the welding depth in the beginning and do the crater treatment well in the ending of welding, since it always supplies the relevent amount of electrical current. Therefore, it can improve the mechanical properties of the welding zone.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.1
• /
• pp.130-136
• /
• 2005

A new optical digitizing system for determining the position of a cursor in three dimensions(3D) and an experimental device for its measurement are presented. A semi-passive system using light intensity modulation, a technology that is well known in radar ranging, is employed in order to overcome precision limitations imposed by background light. This system consists of a charge-coupled device camera placed before a rotating mirror and a light-emitting diode whose intensity is modulated. Using a Fresnel pattern for light modulation, it is verified that a substantial improvement of the signal to noise ratio is realized for the background noise and that a resolution of less than a single pixel can be achieved. This opens the doorway to the realization of high precision 3D digitized measurement. We further propose that a 3D position measurement with a monocular optical system can be realized by a numerical experiment if a linear-period modulated waveform is adopted as the light-modulating one.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.3
• /
• pp.344-350
• /
• 2006

The software GPS receivers based on the SDR technology provide the ability to easily adapt the other signal processing algorithms without changing or modifying the hardware of the GPS receiver. However, it is difficult to implement the software GPS receivers using a commercial processor because of the heavy computational burden for processing the GPS signals in real-time. This paper proposes an efficient GPS signal processing scheme to reduce the computational burden for processing the GPS signals in the software GPS receiver, which uses a fundamental notion compressing the replica signals and the encoded look-up table method to generate correlation values between GPS signals and replica signals. In this paper, it is explained that the computational burden of the proposed scheme is much smaller than that of the typical GPS signal processing scheme. Finally, the processing time of the proposed scheme is compared with that of the typical scheme, and the improvement in the aspect of the computational burden is also shown.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.2
• /
• pp.269-277
• /
• 2008

This paper proposes a necessary and sufficient condition of convergence in the $L_2$-norm sense for a feedback-based iterative learning control (ILC) system including a multi-input multi-output (MIMO) linear time-invariant (LTI) plant. It is shown that the convergence conditions for a nominal plant and an uncertain plant are equal to the nominal performance condition and the robust performance condition in the feedback control theory, respectively. Moreover, no additional effort is required to design an iterative learning controller because the performance weighting matrix is used as an iterative learning controller. By proving that the least upper bound of the $L_2$-norm of the remaining tracking error is less than that of the initial tracking error, this paper shows that the iterative learning controller combined with the feedback controller is more effective to reduce the tracking error than only the feedback controller. The validity of the proposed method is verified through computer simulations.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.25-33
• /
• 2011

Workers in logistics centers also are exposed to serious musculoskeletal disorders the same as workers in general manufacturing due to operating forklifts and other labor duties. The frequency of these work related injuries decreases, workers' job satisfaction In addition, it causes many employees questioning a job change, which is regarded as the primary factor which drops the productivity. In this paper, we conducted a survey ti perceive the correlation between work related injuries in the fields of distribution centers and job satisfaction. Furthermore we made statistical analysis with our findings. The results of our analysis showed that the frequency of work related injuries due to workers' repetitive loading and unloading work is the primary factor which lowers job satisfaction. In order to improve aforementioned problem we propose first of all loading and unloading on pallet basis, second of all automation and computerization of logistics systems, and third of all ensurinf sufficient break time.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.209-210
• /
• 2007

본 연구에서는 건설현장에서 빈번히 발생하는 안전사고를 줄이기 위해 근로자의 안전모 턱끈 착용을 도와주고 안전관리 감독자가 쉽게 확인 및 관리할 수 있는 전자식 안전모 착용 확인 시스템을 개발하였다. 안전모 착용을 확인하기 위해 마그네틱 근접 센서를 안전모 턱끈에 장착하여 안전모 착용 여부를 검출할 수 있게 하였다. 그리고 무선 센서 네트워크를 구성하기 위해 424.700MHz 주파수를 사용하는 무선 모듈을 개발하여 안전모의형에 장착하여 센서 노드(Sensor Node)를 구성하였으며, 메쉬 토폴로지(Mesh Topology)를 적용하였다. 그리고 중앙 관리실에서 근로자의 상황 인지를 위한 안전모 확인 모니터링 시스템을 개발하였다. 본 시스템으로 인하여 근로자의 안전을 도모하고, 안전 사고에서 근로자의 부상 및 인명 손실을 최소화할 수 있으며, 건설용 엘리베이터 안전 상황 인지, 타워크레인 안전 문제등의 시스템으로 활용이 가능할 것이다.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.259-260
• /
• 2007

본 논문은 건물 외면의 유리창 청소로봇에 관한 것으로, 더욱 세부적으로는 청소 시스템을 갖춘 로봇을 사람이 닦기 힘들거나 위험한 고층건물이나 아파트 둥의 실외 유리창에 흡착시켜 청소로봇을 이용하여 실외 유리창을 자동으로 닦을 수 있게 하는 건물 외면의 유리창 청소로봇에 관한 것이다. 진공펌프를 사용하여 유리창에 안정적으로 흡착할 수 있도록 하였고, 블루투스를 이용하여 무선 조종이 가능하도록 하여 사용자가 원거리에서 로봇의 청소를 제어할 수 있도록 하였다.