• 한국정밀공학회지
• /
• 제2권3호
• /
• pp.84-91
• /
• 1985

This paper proposes the theory for the Low Cost Automation (LCA) as a intermediate process of the factory automation, where the SCA is new adaptation for the improving productivity without changing the current product lines. And also this paper deals with the case study for the predictable effects and technical method at the extruding cable lines. As the results, the implementation of the LCA theory could be acomplished saving materials and man power, improving reliability and productivity. For this facilities, it cost within 5% extra expense of a extruding cable line systems. And it could be refund in six months.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 추계학술대회논문집
• /
• pp.48-56
• /
• 1995

A manufacturing process for the axle-housing is analyzed by the rigid-plastic finite element method. The process contains five stages for the final product. During the simulation, remeshings are done four times due to severe mesh distributions. FE Analysis is performed mainly for strain distributions and load-stroke relationships. Those results are to be an useful design criteria for designing a new process sequence in future.

• International Journal of Control, Automation, and Systems
• /
• 제6권3호
• /
• pp.339-350
• /
• 2008

A general active fault-tolerant control framework is proposed for nonlinear systems with sensor faults. According to their identifiability, all sensor faults are divided into two classes: identifiable faults and non-identifiable faults. In the healthy case, the control objective is such that all outputs converge to their given set-points. A fault detection and isolation module is firstly built, which can produce an alarm when there is a fault in the system and also tell us which sensor has a fault. If the fault is identifiable, the control objective remains the same as in the healthy case; while if the fault is non-identifiable, the control objective degenerates to be such that only the healthy outputs converge to the set-points. A numerical example is given to illustrate the effectiveness and feasibility of the proposed method and encouraging results have been obtained.

• 전기학회논문지P
• /
• 제66권1호
• /
• pp.43-47
• /
• 2017

A SIL(Safety Integrity Level) assignment method is used for preventing failure action. The goal of safety system for processing automation is to reduce the human fatal risk. Even if we have developed the processing automation according to developing technology, we are also realized on increasing the human fatal risk cause of unexpected accidents. This study is directed the solution of decision for safety level for safety system and the best architecture for safety system in process automation.

• 한국안전학회지
• /
• 제12권1호
• /
• pp.60-70
• /
• 1997

Since, human error is a major factor contributing to disaster during start-up of operation in Boiler plant. it is necessary to develop an automation system which prevent mode of operation that are known to be dangerous and to bring a loss of energy. The aim of this study is to suggest a model for the computer-aided synthesis of operation sequence as a part of automation system for start-up operation. Synthesis is accomplished by the formation of a hierarchical network of goals which decide sequence of operations. Hierarchical Network is formed by using method which upper goals ( i.e. upper operation al situation) are classified by the function of themselves into lower goals (i.e. lower operational situation). Knowledge for deciding operation sequence is generated by putting In order the knowledge of hazard operation and energy management.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.320-321
• /
• 2010

본 논문에서는 신호주입을 이용하여 매입형 영구자석 동기전동기(IPMSM)의 벡터제어에 필요한 d,q축 인덕턴스를 전동기가 정지한 상태에서 추정하는 방법을 제안하였다. IPMSM의 경우 초기 기동토크를 제대로 발생시키고 d,q 축 인덕턴스의 차이에 의해 발생하는 릴럭턴스 토크를 효과적으로 이용하기 위해서 이 인덕턴스 값은 반드시 필요하다. 제안하는 추정방법은 매우 짧은 시간에 수행되어지며 복잡한 연산이 필요하지 않으므로 산업현장에서 매우 유용하게 적용 될 것이다.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.106-113
• /
• 2014

Rotor eccentricity is one of the major factors that directly influence the security of horizontal electrical machines, and the critical speed of the shaft has a close relationship with vibration. This paper deals with the influence of thermal expansion on the rotor eccentricity and critical speed in large dry submersible motors. The dynamic eccentricity (where the rotor is still turning around the stator bore centre but not its own centre) and critical speed of a three-phase squirrel-cage submersible induction motor are calculated via hybrid analytical/finite element method. Then the influence of thermal expansion is investigated by simulation. It is predicted from the study that the thermal expansion of the rotor and stator gives rise to a significant air-gap length decrement and an inconspicuous slower critical speed. The results show that the thermal expansion should be considered as an impact factor when designing the air gap length.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권11호
• /
• pp.660-668
• /
• 2005

Digital communication networks have become a core technology in advanced building automation systems. BACnet (Building Automation and Control networks) is a standard data communication protocol designed specifically for building automation and control systems. BACnet adopts Master-Slave/Token-Passing (MS/TP) protocol as one of its field level networks. Tn this study, we introduce a method of implementing bandwidth allocation scheme in the MS/TP protocol. The bandwidth allocation scheme improves the capability of real-time communication of the original MS/TP protocol. The bandwidth allocation scheme introduced in this paper can be easily implemented in the existing MS/TP protocol with a slight modification. In this study, we examined the validity of bandwidth allocation scheme using simulation models. The results from the simulation experiment show that the proposed scheme satisfies the requirements of real-time communication.

• 대한의용생체공학회:의공학회지
• /
• 제26권6호
• /
• pp.407-412
• /
• 2005

Convenience is one of the most important factors in medical image segmentation. Convenience is defined by compiling opinions from radiologists, and can be described as controllable maximum automation on the condition of producing only accurate results. The components of convenience are inclusive automation and inclusive modification. Inclusive modification consists of verify-and-confirm, undo-redo, exchange of segmentation methods, and intelligent modification tools. Inclusive automation is composed of automatic selection of a method, automatic selection of a confident segment, and automated chores. The convenient segmentation tool has been developed to segment X-ray images for orthopedic surgery, and has received an excellent evaluation from radiologists.

• Journal of Ubiquitous Convergence Technology
• /
• 제1권1호
• /
• pp.3-8
• /
• 2007

This paper presents a set of techniques used in a real-time visual surveillance system. The system is implemented on a low-cost embedded DSP platform that is designed to work with stationary video sources. It consists of detection, a tracking and a classification module. The detector uses a statistical method to establish the background model and extract the foreground pixels. These pixels are grouped into blobs which are classified into single person, people in a group and other objects by the dynamic periodicity analysis. The tracking module uses mean shift algorithm to locate the target position. The system aims to control the human density in the surveilled scene and detect what happens abnormally. The major advantage of this system is the real-time capability and it only requires a video stream without other additional sensors. We evaluate the system in the real application, for example monitoring the subway entrance and the building hall, and the results prove the system's superior performance.