• 한국정보통신학회논문지
• /
• 제9권4호
• /
• pp.871-876
• /
• 2005

본 논문에서는 유비쿼터스 센서 네트워크의 핵심인 RFID에 대한 응용기술을 개발하기 위하여 대상을 놀이공원으로 잡고, 공원에 출입하는 입장객들이 각 놀이 기구에 입장한 시간과 나가는 시간을 자동으로 입력 받아서 데이터베이스에 저장한 후에 전체적인 놀이공원 인원 배치에 관한 합리적인 지시, 명령을 도출하도록 하는 프로그램을 개발하는 시스템을 개발하였다. 이를 위하여 본 논문에서는 13.25Mhz 대의 RFID 센서와 마이크로소프트사의 MSSQL 데이터베이스와 IIS 웹서버를 기반으로 하는 시스템 구축을 수행하였다. 이를 위하여 SkyeTek사의 RFID 리더를 기반으로 시스템을 구축하여 호스트 PC와 연동 프로그램을 C++ 언어를 이용하여 개발하였고, ASP.NET과 $C\#$을 이용한 웹사이트 구축하였으며, RFID 리더의 태그 인식 범위를 확장하기 위한 외장형 안테나를 제작한 $30\~40$ cm 수준의 인식 거리를 보장하는 동판형 안테나를 개발하였으며, 시스템에 적용한 결과 성능의 우수함을 확인하였다.

• 전기학회논문지
• /
• 제56권7호
• /
• pp.1177-1182
• /
• 2007

Recently, IEC61850 supports the standardized communication technique in both station bus and process bus, and presents the substation automation model. In this paper, we propose the required techniques to develop the Merging Unit (MU), which is one of the important data acquisition equipment in substation automation, under IEC61850 communication protocol. Especially, we also propose the precision time synchronization technique using GPS(Global Positioning System) for the MU. IEC61850-9-2 SV (Sampled Value) service is applied to the MU which is designed using microprocessor. In order to evaluate the performance of the proposed MU, the playback program, which can reconstruct the transmitted sampled value data on the basis of time information, is developed and the performance of the IEC61850 SV service for MU is verified experimentally.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.24-26
• /
• 2005

At present, KS-1000 which is one of a commercial measurement instrument for motor fault diagnosis has been used in industrial field. The measurement system of KS-1000 is composed of three part : harmonic acquisition, signal processing by KS-1000 algorithm, diagnosis for motor fault. First of all, voltage signal taken from harmonic sensor is analysed for frequency by KS-1000 algorithm. Then, based on the result values of analysis skilled expert makes a judgment about whether motor system is the abnormality or degradation state. But the expert system such a motor fault diagnosis is very difficult to bring the expectable results by mathematical modeling due to the complexity of judgment process. In this reason, we propose an automation system using fuzzy model based on genetic algorithm(GA) that builded a qualitative model of a system without priori knowledge about a system provided numerical input output data.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.854-859
• /
• 2010

Distribution Automation System(DAS) is designed to improve operational efficiency by acquisition and control of remote data using its components such as central computation units, communication network and feeder remote terminal units. A conventional human machine interface of the DAS adopts a schematic diagram which is made by drawing power equipments on the geographic information system map. The single line diagram is more useful than the schematic diagram for the main tasks of distribution system operation such as protective relay coordination, service restoration and loss minimization. Since the configuration of the distribution line is changed according to the relocation of the open tie switches, the auto-drawing algorithm based on the connection between the sections and the switches is an essential technique. This paper proposes a new auto-drawing algorithm for a single line diagram of distribution systems based on tertiary tree and collision avoidance method. The feasibility of the proposed algorithm has been testified for various cases using practical distribution system with 12 feeders.

• Smart Structures and Systems
• /
• 제11권2호
• /
• pp.135-161
• /
• 2013

This work presents a test platform for the assessment and benchmarking of modern actuators which have been specifically developed for the new field and service robotics applications. This versatile platform has been designed for the comparative analysis of actuators of dissimilar technology and operating conditions. It combines a modular design to adapt to linear and rotational actuators of different sizes, shapes and functions, as well as those with different load capacities, power and displacement. This test platform emulates the kinematics of robotic joints while an adaptive antagonist-load actuator allows reproducing the variable dynamic loads that actuators used in real robotics applications will be subjected to. A data acquisition system is used for monitoring and analyzing test actuator performance. The test platform combines hardware and software in the loop to allow actuator performance characterization. The use of the proposed test platform is demonstrated through the characterization and benchmarking of three controllable impedance actuators recently being incorporated into modern robotics.

• 대한전자공학회논문지
• /
• 제27권6호
• /
• pp.944-953
• /
• 1990

This paper describes design and implementation of a real-time high-precision vision system for an automation of SMT(surface mounting technology ). Also, a part inspection algorithm which calculates the position and direction of SMD(surface mounted device) accurately and performs the ruling using those information are presented, and a parallel processing technique for implementing those algorithms is also described. For a real-time implementation of iage acquisition and processing, several hardware modules, namely, multi-functional A/D-D/A board, frame memory board are developed. Particularly, a PE (processing element) board which employs the DSP56001 DSP (digital signal processor) is developed for the purpose of concurrent processing of part inspection algorithms. A stand-alone vision system is built by integration of the developed hardware modules and related softwares.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.902-904
• /
• 1993

This paper contains the terminal developement for the feeder remote unit in Korea Distribution Automation System. This terminal unit has serval functions in order to do feeder auotmation as following, the open/close controls and gathering status informations of switchgears, getting line currents and voltages, distribution fault. So FRU has four modules to do those functions-Logic Controller, Relay Controller, Data Acquisition, Display, Power Supply etc. The FRU should be on allays, so AC power is supplied before & behind the switchgear. Power Supply is made up with AC/DC, DC/DC, Battery and/or SOLAR CELLS & CONTROLLER. It is important for the supply to protect against some Surges, because surges are happened so many times. Surge test is fellowing the standard IEC 801-5 or IEEE 587.

• 한국기록관리학회:학술대회논문집
• /
• 한국기록관리학회 2019년도 춘계학술대회
• /
• pp.69-74
• /
• 2019

디지털 환경하에 전자기록은 폭발적으로 증가하고 있으나 전자기록을 효율적으로 관리하고, 효과적으로 서비스하는 방법에 대한 고민은 부족한 상황이다. 기록의 생산 관리 단계의 정보시스템인 온-나라 문서2.0, 기록관리시스템은 클라우드 기반으로 개발하여 보급 중에 있다. 영구기록관리시스템은 공공기록뿐만 아니라 다양한 유형의 민간기록도 입수하여 관리해야하기 때문에 기록관리 신기술 접목이 요구되는 상황이다. 본고에서는 영구기록 관리를 위한 자동화, 지능화 기술에 대해 알아보고자 한다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 추계학술대회
• /
• pp.81-84
• /
• 1994

A clinically oriented EEG and EP mapping system was developed with user-friendly interface and easy interactive operations. The system was based on the graphical user interface developed with C/C++ and Software Development Kit (SDK) operated under Microsoft Windows 3.1. Continuous acquisition for the EEG signal and burst mode acquisition for EEG signal syncronized to the external stimuli arc implemented with real time display. A neural network based automatic artifact discrimation is developed and implemented with which examination time can be reduced by a factor of 3 or more. Several bands of spectral maps and spectrums arc displayed for EEG diagnosis. Amplitude maps of EP signal at specified times by operator are displayed together with cine mode of EP maps for dynamic study. Source localization and other statistical signal processing are also included.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권4호
• /
• pp.21-27
• /
• 2004

In this paper, data acquisition and analysis of a measuring machine for marine engine's cams are discussed. A rotary encoder and linear scale of the machine to measure angular and linear displacement, respectively, are interfaced to the PC via an encoder board with 2 channels. The design and measuring data are interpolated by cubic spline curves to compute the precision error which is defined by the maximum and minimum distances between two curves. The minimum zone fit of ISO is employed to evaluate the geometric deviation. The developed system takes only 5 minutes to measure and analyze the precision error while the CMM takes over I hours even with a skilled operator.