• The Journal of the Acoustical Society of Korea
• /
• v.39 no.6
• /
• pp.549-558
• /
• 2020

In this paper, the method is discussed such that the robustness of automatic initiated narrowband target tracking is improved in passive sonar. In the case of automatic tracking initiation as target in passive sonar, due to a number of clutter, the clutter is initiated as target and tracked which prohibits the operation capability. The associated probability and information entropy of measurements, extracted from detection data, is calculated to keep going on automatic target initiation and tracking of true target, but reduce the automatic initiation and tracking of clutter. If the association probability and information entropy of the extracted measurements is satisfied for the predefined conditions, the procedure of automatic initiation begins. Using sea-trial data, simulations are executed and the results from the proposed method indicate that it keeps the automatic target initiation and tracking of true target and suppresses the automatic target initiation and tracking of clutters in contrary to the conventional method.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.90-101
• /
• 1999

This paper is concerned with the design of automatic ship maneuvering system including automatic path tracking controller and automatic berthing controller. The optimal control technique is employed to design the automatic path tracking controller, which is based on the linearized equations of ship motion. The numerical example shows that the automatic path tracking controller is capable of tracking the line between way points which are determined by pilot a priori. The decentralized control technique is employed to design the automatic berthing controller. In addition to the automatic path tracking controller, the fuzzy logic controller is used to control the forward speed. The numerical example shows that the automatic berthing controller can be successfully implemented.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1823-1831
• /
• 2010

This paper proposes an automatic tracking control algorithm for efficiency improvement of photovoltaic generation. Increasing the power of PV systems should improve the efficiency of solar cells or the power condition system. The normal alignment of the PV module always have to run perpendicular to the sun's rays. The solar tracking system, able to improve the efficiency of the PV system, was initiated by applying that to the PV power plant. The tracking system of conventional PV power plant has been studied with regard to the tracking accuracy of the solar cells. Power generation efficiency were increased by aligning the cells for maximum exposure to the sun's rays. Using a perpendicular position facilitated optimum condition. However, there is a problem about the reliability of tracking systems unable to not track the sun correctly during environmental variations. Therefore, a novel control algorithm needs to improve the generation efficiency of the PV systems and reduce the loss of generation. This control algorithm is the proposed automatic tracking algorithm in this paper. Automatic tracking control is combined the sensor and program method for robust control in environment changing condition. This tracking system includes the insolation, rain sensor and anemometer for climate environment changing. Proposed algorithm in this paper, is compared to performance of conventional tracking control algorithm in variative insolation condition. And prove the validity of proposed algorithm through the experimental data.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.3
• /
• pp.155-161
• /
• 2013

To reduce the personnel and material loss caused by fire, we propose the automatic fire extinguishing system based on the ignition point tracking using the flame detecter. This automatic fire extinguishing system is composed of the flame detecting system and the fire extinguishing system based on the water cannon. We study the method for the ignition point tracking and the automatic fire extinguishing using the water cannon and the flame detecter. The flame detecting system for the early fire detection and the ignition point tracking has to be satisfied the requirement of the detecting range and the flame detection time. So we study the signal process algorithm for an improvement of the flame detecting system.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.6
• /
• pp.321-328
• /
• 2018

This paper presents an automatic target tracking flight system using a PID controller based on velocity command of a multirotor UAV. The automatic flight system includes marker based onboard target detection and an automatic velocity command generation replacing manual controller. A quad-rotor UAV is equipped with a camera and an image processing computer to detect the marker in real time and to estimate the relative distance from the target. The marker tracking system consists of PID controller and generates velocity command based on the relative distance. The generated velocity command is used as the input of the UAV's original flight controller. The operation of the proposed system was verified through actual flight tests using a marker on top of a moving vehicle and tracks it to successfully demonstrate its capability using a quad-rotor UAV.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1826-1835
• /
• 2007

In this paper, we present a new approach for automatic detection and tracking for multiple targets. We combine a highest probability data association(HPDA) algorithm for target detection with a particle filter for multiple target tracking. The proposed approach evaluates the probabilities of one-to-one assignments of measurement-to-track and the measurement with the highest probability is selected to be target- originated, and the measurement is used for probabilistic weight update of particle filtering. The performance of the proposed algorithm for target tracking in clutter is compared with the existing clustering algorithm and the sequential monte carlo method for probability hypothesis density(SMC PHD) algorithm for multi-target detection and tracking. Computer simulation studies demonstrate that the HPDA algorithm is robust in performing automatic detection and tracking for multiple targets even though the environment is hostile in terms of high clutter density and low target detection probability.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.775-778
• /
• 1996

In this research, the robustness of a seam tracking for the automatic welding system is studied. The laser displacement sensor is used as a seam finder. X-Y moving table drived by ac servo motor controls the position and velocity of the torch-and-sensor part. However, dc servo motor is used to control the position and velocity of the torch. The sensor locates ahead of torch to preview the weld line, and brings about the inaccuracy on the torch tracking. To enhance the robustness on this system against the influence of disturbances and model uncertainty, H$\_$.inf./ control is applied to the angular motion of torch. The simulation shows that the tracking accuracy improved significantly. Also, experimental results give a good performance of H$\_$.inf./ control strategy to the automatic seam tracking system for the welding.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.3
• /
• pp.243-251
• /
• 2015

In order to develop an automatic system for welding thin steel plates with curvature such as the corrugated membranes of an LNG storage tank, a rotating mechanism should be firstly designed for the torch to easily follow the weld seam with a constant distance and angle. In this study, a torch rotating mechanism consisting of three circular links, two square-type links and a torch link was proposed for automation of the welding process. A weld-seam tracking system with two axis slides and the proposed rotating mechanism was successfully simulated with a dynamic simulation software. A prototype tracking system was manufactured and a tracking test with the system was then carried out. The test results with tracking system showed that the rotating mechanism could be implemented and it was feasible to be used in automatic tracking of weld seam with curvature.

• Journal of Information Processing Systems
• /
• v.18 no.6
• /
• pp.755-762
• /
• 2022

The existing electrical engineering design method and the dynamic objective function in the application process of automatic control system fail to meet the unbounded condition, which affects the control tracking accuracy. In order to improve the tracking control accuracy, this paper studies the electrical engineering design method based on neural network and the application of automatic control system. This paper analyzes the structure and working mechanism of electrical engineering automation control system by an automation control model with main control objectives. Following the analysis, an optimal solution of controllability design and fault-tolerant control is figured out. The automatic control power coefficient is distributed based on an ideal control effect of system. According to the distribution results, an automatic control algorithm is based on neural network for accurate control. The experimental results show that the electrical automation control method based on neural network can significantly reduce the control following error to 3.62%, improve the accuracy of the electrical automation tracking control, thus meeting the actual production needs of electrical engineering automation control system.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.32-40
• /
• 2011

The tracking and analysis of cell activities in time-lapse sequences plays an important role in understanding complex biological processes such as the spread of the tumor, an invasion of the virus, the wound recovery and the cell division. For automatic tracking of cells, the tasks such as the cell detection at each frame, the investigation of the correspondence between cells in previous and current frames, the identification of the cell division and the recognition of new cells must be performed. This paper proposes an automatic cell tracking algorithm. In the first frame, the marker of each cell is extracted using the feature vector obtained by the analysis of cellular regions, and then the watershed algorithm is applied using the extracted markers to produce the cell segmentation. In subsequent frames, the segmentation results of the previous frame are incorporated in the segmentation process for the current frame. A combined criterion of geometric and intensity property of each cell region is used for the proper association between previous and current cells to obtain correct cell tracking. Simulation results show that the proposed method improves the tracking performance compared to the tracking method in Cellprofiler (the software package for automatic analysis of bioimages).