• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.493-500
• /
• 2009

An ultrasonic signal processing algorithm was developed for extracting the information of cracks generated around the keyway of a turbine rotor disk. B-scan images were obtained by using keyway specimens and an ultrasonic scan system with x-y position controller. The B-scan images were used as input images for 2-Dimensional signal processing, and the algorithm was constructed with four processing stages of pre-processing, crack candidate region detection, crack region classification and crack information extraction. It is confirmed by experiments that the developed algorithm is effective for the quantitative evaluation of cracks generated around the keyway of turbine rotor disk.

• Journal of Plant Biotechnology
• /
• v.43 no.4
• /
• pp.457-465
• /
• 2016

Microsatellites are one of the most suitable markers for identification of variety, as they have the capability to discriminate between narrow genetic variations. The polymorphism level between 120 microsatellite primer pairs and 148 soybean varieties was investigated through the fluorescence based automatic detection system. A set of 16 primer pairs showed highly reproducible polymorphism in these varieties. A total of 204 alleles were detected using the 16 microsatellite markers. The number of alleles per locus ranged from 6 to 28, with an average of 12.75 alleles per locus. The average polymorphism information content (PIC) was 0.86, ranging from 0.75 to 0.95. The unweighted pair group method using the arithmetic averages (UPGMA) cluster analysis for 148 varieties were divided into five distinctive groups, reflecting the varietal types and pedigree information. All the varieties were perfectly discriminated by marker genotypes. These markers may be useful to complement a morphological assessment of candidate varieties in the DUS (distinctness, uniformity and stability) test, intervening of seed disputes relating to variety authentication, and testing of genetic purity in soybean varieties.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.369-372
• /
• 2002

In this research, a vision system for detecting tool breakage which is hardly detected by such indirect in-process measurement method as acoustic emission, cutting torque and motor current was developed and embedded into a PC-NC system. The vision system consists of CMOS image sensors, a slit beam laser generator and an image grabber board. Slit beam laser was emitted on the tool surface to separate the tool geometry well from the various obstacles surrounding the tool. An image of tool is captured through two steps of signal processing, that is, median filtering and thresholding and then the tool is estimated normal or broken by use of change of the centroid of the captured image. An air curtain made by the jetting high-pressure air in front of the lens was devised to prevent the vision system from being contaminated by scattered coolant, cutting chips in cutting process. To embed the vision system to a Siemens PC-NC controller 840D NC, an HMI(Human Machine Interface) program was developed under the Windows 95 operating system of MMC103. The developed HMI is placed in a sub window of the main window of 840D and this program can be activated or deactivated either by a soft key on the operating panel or M codes in the NC part program. As the tool breakage is detected, the HMI program emit a command for automatic tool change or send alarm to the NC kernel. Evaluation test in a high speed tapping center showed the developed system was successful in detection of the small-radius tool breakage.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.5
• /
• pp.27-33
• /
• 2003

G-code, another name of ISO6983, has been a popular commanding language for operating machine tools. This G-code, however, limits the usage of today's fast evolving high-performance hardware. For intelligent machines, the communications between machine and CAD/CAM departments become important, but the loss of information during generating G-code makes the production department isolated. The new standard for operating machine tools, named STEP-NC is just about to be standardized as ISO14649. As this new standard stores CAD/CAM information as well as operation commands of CNC machines, and this characteristic makes this machine able to exchange information with other departments. In this research, the new CNC machine operated by STEP-NC was built and tested. Unlike other prototypes of STEP-NC milling machines, this system uses the STEP-NC file in XML file form as data input. This machine loads information from XML file and deals with XML file structure. It is possible for this machine to exchange information to other databases using XML. The STEP-NC milling machines in this research loads information from the XML file, makes tool paths for two5D features with information of STEP-NC, and machines automatically without making G-code. All software is programmed with Visual $C^{++}$, and the milling machine is built with table milling machine, step motors, and motion control board for PC that can be directly controlled by Visual $C^{++}$ commands. All software and hardware modules are independent from each other; it allows convenient substitution and expansion of the milling machine. Example 1 in ISO14649-11 having the full geometry and machining information and example 2 having only the geometry and tool information were used to test the automatic machining capability of this system.

• Korean Journal of Remote Sensing
• /
• v.28 no.3
• /
• pp.319-327
• /
• 2012

In this paper, we introduce a newly developed photogrammetric software for automatic generation of high quality geo-products and its performance assessment carried out using various satellite images. Our newly developed software provides the latest techniques of an optimized sensor modelling, ortho-image generation and automated Digital Elevation Model (DEM) generation for diverse remote sensing images. In particular, images from dual- and multi-sensor images can be integrated for 3D mapping. This can be a novel innovation toward a wider applicability of remote sensing data, since 3D mapping has been limited within only single-sensor so far. We used Kompsat-2, Ikonos, QuickBird, Spot-5 high resolution satellite images to test an accuracy of 3D points and ortho-image generated by the software. Outputs were assessed by comparing reliable reference data. From various sensor combinations 3D mapping were implemented and their accuracy was evaluated using independent check points. Model accuracy of 1~2 pixels or better was achieved regardless of sensor combination type. The high resolution ortho-image results are consistent with the reference map on a scale of 1:5,000 after being rectified by the software and an accuracy of 1~2 pixels could be achieved through quantitative assessment. The developed software offers efficient critical geo-processing modules of various remote sensing images and it is expected that the software can be widely used to meet the demand on the high-quality geo products.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.171-181
• /
• 2011

A vision-based method for positioning and orienting of pallets is presented in this paper, which guides autonomous forklifts to engage pallets automatically. The method uses a single camera mounted on the fork carriage instead of two cameras for stereo vision that is conventionally used for positioning objects in 3D space. An image back-projection technique for determining the orient of a pallet without any fiducial marks is suggested in tins paper, which projects two feature lines on the front plane of the pallet backward onto a virtual plane that can be rotated around a given axis in 3D space. We show the fact that the rotation angle of the virtual plane on which the back-projected feature lines are parallel can be used to describe the orient of the pallet front plane. The position of the pallet is determined by using ratio of the distance between the back-projected feature lines and their real distance on the pallet front plane. Through a test on real pallet images, we found that the proposed method was applicable to real environment practically in real-time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.851-859
• /
• 2011

In this paper, we propose the method that automatically extracts the silhouette and the joints of consecutive input image, and track joints to trace object for interaction between human and computer. Also the proposed method presents the action of human being to map human body using joints. To implement the algorithm, we model human body using 14 joints to refer to body size. The proposed method converts RGB color image acquired through a single camera to hue, saturation, value images and extracts body's silhouette using the difference between the background and input. Then we automatically extracts joints using the corner points of the extracted silhouette and the data of body's model. The motion of object is tracted by applying block-matching method to areas around joints among all image and the human's motion is mapped using positions of joints. The proposed method is applied to the test videos and the result shows that the proposed method automatically extracts joints and effectively maps human body by the detected joints. Also the human's action is aptly expressed to reflect locations of the joints

• Journal of KIISE:Software and Applications
• /
• v.34 no.2
• /
• pp.104-111
• /
• 2007

This paper examines how the performance of an automatic speech recognizer was improved for Korean Point-of-Interest (POI) data by modeling pronunciation variation using structural prosodic information such as prosodic words and syllable length. First, multiple pronunciation variants are generated using prosodic words given that each POI word can be broken down into prosodic words. And the cross-prosodic-word variations were modeled considering the syllable length of word. A total of 81 experiments were conducted using 9 test sets (3 baseline and 6 proposed) on 9 trained sets (3 baseline, 6 proposed). The results show: (i) the performance was improved when the pronunciation lexica were generated using prosodic words; (ii) the best performance was achieved when the maximum number of variants was constrained to 3 based on the syllable length; and (iii) compared to the baseline word error rate (WER) of 4.63%, a maximum of 8.4% in WER reduction was achieved when both prosodic words and syllable length were considered.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.215-224
• /
• 2011

There have been studying many researches to detect human body and to track one with increasing interest on human and computer interaction. In this paper, we propose the algorithm that automatically extracts joints, linked points of human body, using the ratio of human body under single camera and tracks object. The proposed method gets the difference images of the grayscale images and ones of the hue images between input image and background image. Then the proposed method composes the results, splits background and foreground, and extracts objects. Also we standardize the ratio of human body using face' length and the measurement of human body and automatically extract joints of the object using the ratio and the corner points of the silhouette of object. After then, we tract the joints' movement using block-matching algorithm. The proposed method is applied to test video to be acquired through a camera and the result shows that the proposed method automatically extracts joints and effectively tracks the detected joints.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.496-502
• /
• 2016

In this study, we investigated the comparative NHPP software model based on learning techniques that operators in the process of software testing and development of software products that can be applied to software test tool. The life distribution was applied Makeham distribution based on finite fault NHPP. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. As a result, the learning factor is larger than automatic error that is usually well-organized model could be established. This paper, a trust characterization of applying using time among failures and parameter approximation using maximum likelihood estimation, after the effectiveness of the data through trend examination model selection were well-organized using the mean square error and $R^2$. From this paper, the software operators must be considered life distribution by the basic knowledge of the software to confirm failure modes which may be helped.