• Proceedings of the KSPS conference
• /
• 대한음성학회 2003년도 10월 학술대회지
• /
• pp.83-88
• /
• 2003

This study carried out an experimental English pronunciation assessment to see the differences in the relationship between the different rater categories. The result shows that i) correlation between Korean and Native American raters is high(r=.98) enough to be considered reliable, ii) previous instructions about assessment rubric and the knowledge about English phonetics and phonology exert little influence on the rating scores, iii) correlation between the automatic ILT(Interactive Language Tutor) rating using speech recognition technology and Natives' rating is stronger than that between ILT and Koreans' rating.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• 제13권5호
• /
• pp.118-123
• /
• 2004

The compressor has one of important roles in refrigeration cycle and it determines refrigeration efficiency and quality This paper aims to monitor rotary compressors for room air conditioners by using Acoustic Emission(AE) technique. The reliability of rotary compressors has been evaluated through visual inspection on them after long term test. This paper describes methods for acquisition and processing AE raw signal to monitor the state of rotary compressor. A detecting method of abnormal compressor in real time is suggested and special-purpose monitoring system which can be applied to automatic manufacturing line is developed using one-chip microprocessor at low cost.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.209-214
• /
• 2003

This study presents the analysis of ball end milling machinability and its application to the determination of the optimum feedrate in the CNC machining process of sculptured surface. The methods which estimate the cutting force system is approached experimentally. The estimation strategy, named technological processor, was applied to the machining process of sculptured surface for finding optimum variable feedrate. From the result of practical implementation for the test model, it is ascertain that the technological processor have brought the dispersion of force profiles. As compared with conventional imposing of cutting conditions, the machining time has reduced by more than 60%.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• 제17권6호
• /
• pp.56-62
• /
• 2008

An Allium-odorum is difficult material to handle because it is soft and weak mechanically. For bundling work of allium-odorum, we must grip in the bundle shape of unit weight. However it is difficult to grip allium-odorum by hand because the bundle bulk is very big. Especially, in packing work, the bundle shape of allium-odorum package is more important than other vegetables because the sale price depend on the bundle shape. In this paper, we propose bundling mechanism for a rectangular shape, and semi-auto bundling mechanism by a eccentric roller and a triangular link. We carry out mechanical model and analysis respectively using the CATIA V5 and SimDesigner. We have manufactured the prototype of the semi-automatic bundling machine, and got satisfied result through field test. This machine is in the process of commercialization.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 한국음향학회 1998년도 제15회 음성통신 및 신호처리 워크샵(KSCSP 98 15권1호)
• /
• pp.87-92
• /
• 1998

In general, the synthesis unit database was constructed by recording isolated word. In that case, each boundary of word has typical prosodic pattern like a falling intonation or preboundary lengthening. To get natural synthetic speech using these kinds of database, we must artificially distort original speech. However, that artificial process rather resulted in unnatural, unintelligible synthetic speech due to the excessive prosodic modification on speech signal. To overcome these problems, we gathered thousands of sentences for synthesis database. To make a phone level synthesis unit, we trained speech recognizer with the recorded speech, and then segmented phone boundaries automatically. In addition, we used laryngo graph for the epoch detection. From the automatically generated synthesis database, we chose the best phone and directly concatenated it without any prosody processing. To select the best phone among multiple phone candidates, we used prosodic information such as break strength of word boundaries, phonetic contexts, cepstrum, pitch, energy, and phone duration. From the pilot test, we obtained some positive results.

• Korean Journal of Computational Design and Engineering
• /
• 제21권2호
• /
• pp.143-150
• /
• 2016

In shipbuilding, hull assemblies are manufactured by welding. The thermal deformation caused by the welding produces shape deformation. Counter-deformed design methods have been used in shipyards to cope with the weld-induced deformation of ship assembles. Finite element methods (FEMs) are frequently used to estimate welding distortion in the counter-deformed design. For the estimation of welding distortion, producing uniform rectangular elements is required to enter thermal loads on the welding line and obtain accurate analysis results. In this paper, a new automatic mesh generation method is proposed for prediction of welding deformation in FEM. Meshes are constructed for test cases to demonstrate the feasibility of the proposed mesh generation method.

• Journal of Korean Society for Quality Management
• /
• 제25권1호
• /
• pp.1-16
• /
• 1997

In this paper, we illustrate how to design screening inspections for minimizing a total quality costs in a multi-stage manufacturing systems. The total quality cost model consists of inspection costs, internal failure costs, external failure costs, and Taguchi's loss function. Although, the use of automatic test equipment such as machnie vision and CMM has greatly increased inspection speed and accuracy, screeing(100% inspection) could be considered only as a short-term method to remove nonconforming items from a population, not for a long-term quality improvement. However, screeing should be used for certain situations such as before costly operations and after unsatisfied operations. This paper ends with an example that demonstrates the usefulness of the model.

• Journal of the Korean Society for Precision Engineering
• /
• 제10권1호
• /
• pp.114-125
• /
• 1993

Thermoelastoplastic analysis of a typical device consisting of fixed tube and movable case having an inital clearance in between, which is subjected to pressure and thermal load, has been carried out to examine the cause of malfunction mainly at high temperature condition, and to improve the design. Stresses, deformed shape, interface state and their effects on normal function of case are discussed by using finite element method. The extraction energy can be remarkably reduced by changing the configuration of tube from the present design (Parallel type) to the improved design (Tapered type). This effect has been proved by sustained cyclic function test.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.201-207
• /
• 1999

The automatic pinhole detection system is described. The goal of this project is to study the feasibility test of the new concept for hole detection. The developed method is able to detect almost 50$\mu\textrm{m}$ pinhole by evaluating the shining of the light as if there is pinhole in the strip. Moreover, it is possible to inspect up to the 200$\mu\textrm{m}$ inclined pinhole. The system cosists of three main functional parts: the source part of the light which is using the linear halogen lamp, the image gathering part which is using a line CCD and the image processing part. The light spot can be controlled and optimized corresponding to the situation of the strip. To eliminate back ground noise, the binary image processing method is adopted.

• Proceedings of the KWS Conference
• /
• 대한용접접합학회 1998년도 특별강연 및 춘계학술발표 개요집
• /
• pp.150-154
• /
• 1998

The purpose of this paper is to investigate optimum welding conditions of STS 304 thin sheet by GTA welding and control 6 $\delta$--fenite which is harmful in mechanical processing, corrosion problem and can be formed brittle a phase in using long term at high temperature. One series of automatic welds was made using argon plus 10, 20, 30 % nitrogen to ensure a fully austenite deposit. Results obtained were summarized as follows: 1) 6 $\sigma$ferrite content in the weld metals is influenced largely by the nitrogen content. 2) Additions of nitrogen to the shielding gas can significantly reduce the amount of retained delta ferrite and result in an increase in hot cracking. 3) Bead width was increased when Ar + $N_2$ shielding gas was used and travel speed was increased. 4) Ar+$N_2$ shielding gas made weld metal ductile and reduce 6 -$\delta$-ferrite.