• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.259-263
• /
• 2008

최근 기후변화로 인해 집중호우, 태풍, 폭설 등 악기상 발생이 빈번해지고 있으며, 특히 태풍은 단일 기상현상 가운데 가장 강력하며, 태풍으로 인하여 집중호우 폭풍 및 해일 등 부차적 악기상이 함께 발생하여 인명 및 경제 사회적인 피해 또한 막대하지만, 태풍으로 인한 강수량 측정은 다른 현상에 비해 정확한 측정이 어렵다. 이것은 태풍이 발생에서 소멸까지 일생의 대부분을 해상에서 보내, 육상 관측으로는 정확한 강수량 측정이 어렵기 때문이다. 그러나 위성자료를 활용하면 해상에서의 태풍 구름에 의한 강수분포를 추정할 수 있으며, 특히 구름을 투과하여 아래 내부구조 파악이 가능한 마이크로파 영역의 적외복사에너지를 이용하면 좀더 정확한 강수량 자료를 얻을 수 있을 것이다. 그러나 관측영역 확대를 위해서는 가능한 마이크로파위성자료를 합성처리하여 활용하는 것이 효과를 얻을 수 있을 것이다. 본 연구에서는 현재 기상청에서 수신하고 있는 Aqua/AMSR-E, SSM/I, TMI, QuilSCAT 등에서 산출되는 강수량을 상호 검증기법을 이용하여 합성처리 하였다. 위성자료마다 정확도와 해상도가 다른 것에 대해서는 높은 정확도에 가중치를 주고, 고해상도 자료에 맞추어 픽셀 크기를 맞추었다. 사용한 자료는 2005년$\sim$2007년 간 발생한 태풍 중에서 우리나라에 영향을 준 나비, 나리, 에위니아 등 3개 사례이며, 검증은 자동관측자료(AWS : Automatic Weather Station)자료와 일본 AWS자료(AMEDAS : Automatic Measurement Data Aquisition System) 및 미해군 연구소 발표자료를 이용하여, 시계열오차 분석 및 산포도를 분석하였다.

• 대한공간정보학회지
• /
• 제6권1호
• /
• pp.53-63
• /
• 1998

본 연구의 목적은 GIS와 GPS를 이용하여 서울시 대기측정시스템인 상시 자동측정망의 현황을 파악하고 개선방안을 제안하는데 있다. 국내의 경우 차량 등의 이동배출원에 관한 이동오염원(mobile source)과 면오염원(area source)에 대한 체계적인 조사와 관리가 미흡한 실정이다. 대기오염을 관리하거나 개선하기 위한 저감대책을 수립하려면 대기오염물질 배출원의 시간적, 공간적 배출현황데이터와 이를 토대로 구축된 배출목록시스템(Emission Inventory System)과 대기오염확산모델들이 마련되어야 한다. 본 논문에서는 서울시 수치지도와 마이크로소프트사의 Visual Basic을 사용하여 서울시 상시 자동측정망 배출원의 배출현황데이터에 관한 가시화된 인터페이스를 개발하여 보여주고 있다.

• 한국소음진동공학회논문집
• /
• 제24권7호
• /
• pp.549-554
• /
• 2014

In general, there has been a lot of research concerned about the gear noise known to be proportional to gear transmission error for external gears likewise spur, helical gear, and hypoid gears. But, In the case of planetary gear set, gear noise study is insufficient because of the difficulty of designing, manufacturing, and understanding of its mechanical system. This study is aimed to develop the transmission error measurement equipment for the planetary gear sets used in the automatic transmission. By comparing the results of the transmission error and noise objectively, user could select the optimized planetary gear set which has quiet noise level before manufacturing the automatic transmission.

• 한국CDE학회논문집
• /
• 제18권4호
• /
• pp.283-289
• /
• 2013

Presented in this paper is an adaptive measuring procedure of dental impression using the Structured Light System. While measuring a complex object, such as dental impression, in the reverse engineering, it is not possible to acquire all parts of the scanned surface. Missing scanned data is resulted in holes in a created triangular mesh. The focus of this paper is to introduce an algorithm for automatic identification of additional scanning orientations to fill holes that are created by a default scan. The proposed algorithm was developed by the three major technological requirements: camera visibility, projector visibility, data reliability. In order to satisfy the requirements, the proposed algorithm determines additional scanning orientation from the orientation of a projection plane derived from the average normal vector of boundary triangles.

• 터널과지하공간
• /
• 제6권4호
• /
• pp.287-297
• /
• 1996

Input data play an important role in numerical analyses. However, it is difficult to obtain appropriate data for many reasons. In order to overcome those difficulties, an automatic MPBX(Multi-Position Borehole Extensometer) monitoring system is developed. This system can be applied to the analyses of measured data which include evaluation of the stabiliyt, efficiency of construction and the validity of numerical analyses. At first, the MPBX among field measurement tools is considered in this study. Also, 3-dimension finite element analyses are carried out to verify the influence of geological conditions and excavation sequence on the MPBX displacement. The effect of geological conditons on the displacement can be estimated qualitatively qualitavely from the measured data by plotting displacement vs. depth.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.948-954
• /
• 2008

Now, but task for stringing trolley wire is worked manually by a measurement of dip, we need to development the automatic control system for a safety and effective tasks. In this paper, in works of stringing trolley wire by a mobile of robot, a method is proposed tension control for the stringing trolley wire. On the basics of a wire model with hard nonlinear, ac servo motor model for torque generating and stringing wire tension, the tension control scheme is design and implemented with a detected wire tension by a load cell. We experimentally show that the performance of the tension response are satisfactory to regulator tension. The proposed system is simulated and experimented, results is verified the utilities.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1542-1551
• /
• 1990

본 연구에서는 직경오차를 최종 다듬질 가공 직전에 선반의 주축 정지 상태에 서 공구대에 부착시킨 전기마이크로미터로 측정하는 방법을 이용하여, 어떠한 공작물 형상에 대해서도 오차 측정경로를 NC 프로그램으로 자동 생성하고 이를 이용하여 직경 오차를 측정, 보정하는 알고리즘을 제안함과 동시에 수정된 최종 다듬질 가공용 NC프 로그램을 자동적으로 생성하는 시스템을 개발하고자 한다.

• 전자공학회논문지D
• /
• 제34D권2호
• /
• pp.10-20
• /
• 1997

This paper describes the design, the manufacture and the development of th eautomatic gain control unit which ajdusts the gain of IF processor in the high sensitive & multifunctional receiver unit (HMR) for pulse doppler radar system. Accodording to the effective distnce of target, radar cross section, and a lot of external environments (such as clutter), the receiving stage of RADAR system often deviates from dynamic range. To solve this kind o fproblem, continuous/pulse wave AGC are realized, make it possible to control the gain characteristics of receiver stably, and can increase dynamic range linearly by adjusting the gain slope of receiver which is limited by 1-dB gain compression point. In this study, AGC unit is designed to regulate the total gain of receiver by using te analog feedback theory. It also has rapid enough response to process pulse signal. This study presents the gain control method of IF, the real manufacture technique (the package-type components) and the measurement performance of AGC.

• 한국철도학회논문집
• /
• 제8권2호
• /
• pp.155-160
• /
• 2005

We propose a tram position estimation method for automatic train control system. The accurate train position should be continuously feedback to control system for safe and efficient operation of trains in railway. In this paper, we propose the sensor fusion method integrating a tachometer, a transponder, and a doppler sensor far estimation of train position. The external sensors(transponder, doppler sensor) are used to compensate for the error of internal sensor (tachometer). The Kalman filter is also applied to reduce the measurement error of the sensors. Simulation results are then presented to verify the usefulness of the proposed method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.201-207
• /
• 1999

The automatic pinhole detection system is described. The goal of this project is to study the feasibility test of the new concept for hole detection. The developed method is able to detect almost 50$\mu\textrm{m}$ pinhole by evaluating the shining of the light as if there is pinhole in the strip. Moreover, it is possible to inspect up to the 200$\mu\textrm{m}$ inclined pinhole. The system cosists of three main functional parts: the source part of the light which is using the linear halogen lamp, the image gathering part which is using a line CCD and the image processing part. The light spot can be controlled and optimized corresponding to the situation of the strip. To eliminate back ground noise, the binary image processing method is adopted.