• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.69-72
• /
• 2002

The geometry parameter of tool such as rake angle and clearance angle is defined clearly to solve the difference in communication between design and measurement stage. Using the developed simulation program, wheel is properly determined and end mill can be manufactured accurately. The performance test with well defined end mill provides sufficient information to decide optimal geometry. For machining hardened steel, end mills are designed and manufactured. Optimal rake angle and clearance angle is obtained from performance test. A specific software for automatic end mill production is developed far simulation and fur generation of NC code as Cad/CAM system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.308-312
• /
• 1989

We developed a model of NC controller with IBM-PC as a host cpu and integlligent NC servo controller for 2 axes that can be expaned to 4 axes. Basic conceptions, including hardware structure design, servo controller design, communication protocol, and interpolation hardware design was already publicated on '87 KIEE conference. Following this, we focussed on the emulation of tyhe controller with X-Y table as complete NC machine experimenting some drawings made by NC code program that can be edited and executed in automatic on single step mode. In addition we designed the M.S.T functions with PLC and tested for M-function timing. Finally, we designed NC interface to fit with M-function output and we contructed total system of NC controller with IBM PC host with the result of successful development of new NC model.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.4
• /
• pp.620-627
• /
• 1990

A software tool implementing cascaded SCF (Switched Capacitor Filter) is developed. A comprehensive procedure is described for the design of cascaded SCF, and some design considerations are discussed. In program several user-selectable filter approximation techniques, and two optimising methods which reduce the total capacitance are included. Analysis of the partial positive feedback and the effect of clock frequency to total capacitance are presented in detail. Two pratical examples are given to prove its validity in reducing the total capacitance. Developed tool can be used for general SCF generator.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.2
• /
• pp.431-439
• /
• 1996

New design principles nad necessary conditions for a mechanical system have been suggested to be kept in the design process using a washing machine transmission as a model. The necessary conditions are funcitnal requirement condition and spatial arrangement condition. The design principles to satisfy the necessary conditions are the principle of sequence and the principle of expansion. Decision sequence for state variables and design varibles of various mechanicla elements have been formulated. New automatic design program for washing machine transmission has been developed observing the necessary conditions and design principles investigated in this study. It was verified to be very effective to follow the design conditions, principles nad formulated decision sequence in mechanical system design process.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.857-862
• /
• 2023

In order for an autonomous ship to arrive near the pier and automatically berth without the help of a tugboat or pilot, it is necessary to recognize the pier and calculate the thruster output and output angle for berthing to the pier at a fixed berthing speed under given external force conditions. Therefore, in this study, the external force and moment acting on the ship while berthing were analyzed, and the thruster output calculation for automatic berthing was designed and the basic concept for the development of the automatic berthing program was designed. The wind pressure applied to the hull by the wind while the ship is berthing was calculated based on the wind pressure area and the wind direction angle and the turning moment to rotate the ship according to the transverse force of the ship was calculated. Considering the force acting on the ship and the turning moment during berthing, a theoretical formula was presented to calculate the thruster output and output angle for berthing parallel to the pier, and the turning due to other variables was controlled by the PID controller. In addition, the basic concept for program development was presented by analyzing the input elements necessary for the theoretical formula.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.476-484
• /
• 2017

The purpose of this paper is to verify the structural integrity of a region with numerous penetration-holes in offshore structures such as semi-submersible rig and FPSO. In order to effectively check the yielding and buckling strength of plate members with penetration-holes, a screening analysis program was developed with the FE analysis tool to generate fine meshed model using the theoretical and analysis methods. When a hole is appeared in the plate structure members, the flow of stress is altered such that concentrations of stress form near the hole. Stress concentrations are of concern during both preliminary and detail design and need to be addressed from the perspectives of strength. To configure the geometrical shape, very fine meshed FE analysis is needed as the most accurate method. However, this method is practically impossible to apply for the strength verifications for all perforated plates. In this paper, screening analysis method was introduced to reduce analysis tasks prior to detailed FE analysis. This method is applied to not only the peak stress calculation combined stress concentration factor with nominal stress but also nominal equivalent stress calculation considering cutout effects. The areas investigated by very fine meshed analysis were to be chosen through screening analysis without any reinforcements for penetration-holes. If screening analysis results did not satisfy the acceptance criteria, direct FE analysis method as the 2nd step approach were applied with one of the coarse meshed model considering hole or with the very fine meshed model considering the hole shape and size. In order to effectively perform the local fine meshed analysis, automatic model generating program was developed based on the MSC/PATRAN which is pre-post FE analysis program. Buckling strength was also evaluated by Common Structure Rule (CSR) adopted by IACS as the stress obtained from very fine meshed FE analysis. Due to development of the screening analysis program and automatic FE modeling program, it was able to reduce the design periods and structural analysis costs.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.1
• /
• pp.114-124
• /
• 2004

In this paper, we present an automatic C source code generation system for DirectShow based multimedia application programming. In this system, C source code is automatically synthesized from the filter connection graph edited with GraphEdit, a utility tool provided with DirectShow SDK package from Microsoft. In traditional DirectShow programming environments, program design and brief testing steps are usually done with GraphEdit tool just by inserting filters and connecting them properly, while actual implementation of the program should be done separately. The filter connection graph information from GraphEdit is used just as a reference in such the implementation step. Therefore, our system which automatically generates C source code directly from the filter connection graph of GraphEdit seems very useful and many programmers can develop DirectShow based multimedia application programs more effectively and quickly using our system. In addition, our system supports more various media stream control functions for the generated application programs than the existing system such as Wizard which supports limited and fixed number of media control functions only. This feature allows more flexibility in the user interface of the generated source program and makes our system more practical for DirectShow based programming.

• Journal of Korean Association for Spatial Structures
• /
• v.1 no.1 s.1
• /
• pp.125-134
• /
• 2001

The objective of this study is the development of size discrete optimum design algorithm which is based on the GAs(genetic algorithms). The algorithm can perform size discrete optimum designs of space trusses. The developed algorithm was implemented in a computer program. For the optimum design, the objective function is the weight of space trusses and the constraints are limite state design codes(1998) and displacements. The basic search method for the optimum design is the GAs. The algorithm is known to be very efficient for the discrete optimization. This study solves the problem by introducing the GAs. The GAs consists of genetic process and evolutionary process. The genetic process selects the next design points based on the survivability of the current design points. The evolutionary process evaluates the survivability of the design points selected from the genetic process. In the genetic process of the simple GAs, there are three basic operators: reproduction, cross-over, and mutation operators. The efficiency and validity of the developed discrete optimum design algorithm was verified by applying GAs to optimum design examples.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.2
• /
• pp.189-196
• /
• 1994

The purpose of this study is to develop a computer program for automatic dart manipulation, as well as basic pattern making, of women's front bodice. In addition to accuracy and efficiency In pattern making, this computer program provides variations of basic patterns through dart manipulation. AutoCAD, running on the Austin 486DX micro-computer is used for this research. The procedures of this study are as follows : 1. A pattern-making method for women's front bodice is selected. 2. All co-ordinate points are located following the same way and order of drafting. 3. Drafting of a basic front bodice is programmed 4. Functions for various single dart manipulations are defined. 5. Menu-driven user interface is developed.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.56-61
• /
• 2010

Simulator is a development equipment which enables the ECU to operate in normal mode by simulating the interface signal between ECU and mechanical system electrically. Embedded simulator means simulation function is embedded in ECU firmware, hence the electrical signal interface is replaced by the substitution of information at system program level. This paper explains the development of embedded transmission simulator for the verification of TCU firmware function which covers shifting control and on-board diagnosis. The embedded simulation program is executed in TCU processor along with the TCU firmware and it provides TCU firmware with not only the speed information those are appropriate both in driving and shifting conditions, but also the fault detection signals. Experimental results show that the validity of embedded simulator and its usefulness to the TCU firmware development and verification.