• Radiation Oncology Journal
• /
• v.20 no.4
• /
• pp.375-380
• /
• 2002

Purpose : To develop a practical film dosimetry system for routine Quality Assurance (QA). Materials and Methods :An One Click Film (OCF) Dosimetry system was designed to perform swift routine QA with functions including automatic fog value elimination, angle adjustment, automatic symmetry calculation, and realtime profile generation with the ability to display realtime three-dimensional dose distributions. Results : The most frequently used functions for routine QA, such as the elimination of the fog value, conversion into an H&D curve, symmetry, and isodose distribution, can be achieved with only one click. Conclusion : Reliable results were achieved with the OCF dosimetry with simpler steps than other commercially available film dosimetry systems for routine QA. More research on the refined user interface will make this system be clinically useful.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.3
• /
• pp.51-57
• /
• 2012

Hepatic vessel tree is the key structure for hepatic disease diagnosis and liver surgery planning. Especially, it is used to evaluate the donors' and recipients' liver for the LDLT(Living Donors Liver Transplantation) and estimate the volumes of left and right hepatic lobes for securing their life in the LDLT. In this study, we propose a method to apply canny edge detection that is not affected by noise to the liver images for automatic segmentation of hepatic vessels tree in contrast abdominal MDCT image. Using histograms and average pixel values of the various liver CT images, optimized parameters of the Canny algorithm are determined. It is more time-efficient to use the common parameters than to change parameters manually according to CT images. Candidates of hepatic vessels are extracted by threshold filtering around the detected the vessel edge. Finally, using a system which detects the true-negatives and the false-positives in horizontal and vertical direction, the true-negatives are added in candidate of hepatic vessels and the false-positives are removed. As a result of the process, the various hepatic vessel trees of patients are accurately reconstructed in 3D.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.94-99
• /
• 2010

This paper presents a charge pump architecture for correcting the current mismatch due to the PVT variation. In general, the current mismatch of the charge pump should be minimized to improve the phase noise and spur performance of the PLL. In order to correct the current mismatch of the charge pump, the current difference is detected by the replica charge pump and fed back into the main charge pump. This scheme is very simple and guarantees the high accuracy compared with the prior works. Also, it shows a good dynamic performance because the mismatch is corrected continuously. It is implemented in 0.13um CMOS process and the die area is $100{\mu}m\;{\times}\;160{\mu}m$. The voltage swing is from 0.2V to 1V at supply voltage of 1.2V. The charging and discharging currents are $100{\mu}A$, respectively and the current mismatch due to the PVT variation is less than 1%.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.287-297
• /
• 2016

This study aims to identify the relationship between climatic factors and stand mean Diameter at Breast Height (DBH) for two major tree species; Pinus densiflora and Quercus mongolica in Andong-dam basin. Forest variables such as age, diameter distribution and number of trees per hectare from the $5^{th}$ and $6^{th}$ National Forest Inventory data were used to develop a DBH estimation model. Climate data were collected from six meteorological observatory station and twelve Automatic Weather System provided by Korea Meteorological Administration to produce interpolated daily average temperature map with Inverse Distance Weighting (IDW) method. Andong-dam basin reflects rugged mountainous terrain, so temperature were adjusted by lapse rate based correction. As a result, predictions of model were consistent with the previous studies; that the rising temperature is negatively related to the growth of Pinus densiflora whereas opposing trend is observed for Quercus mongolica.

• Korean Journal of Remote Sensing
• /
• v.28 no.2
• /
• pp.191-202
• /
• 2012

A high resolution satellite imagery such as KOMPSAT-2 includes a material containing rational polynomial coefficient (RPC) for three-dimensional geopositioning. However, image geometries which are calculated from the RPC must have inevitable systematic errors. Thus, it is necessary to correct systematic errors of the RPC using several ground control points (GCPs). In this paper, we propose an efficient method for automatic correction of image geometries using tie points of a stereo pair and the Shuttle Radar Topography Mission (SRTM) Digital Elevation Model (DEM) without GCPs. This method includes four steps: 1) tie points extraction, 2) determination of the ground coordinates of the tie points, 3) refinement of the ground coordinates using SRTM DEM, and 4) RPC adjustment model parameter estimation. We validates the performance of the proposed method using KOMPSAT-2 stereo pair. The root mean square errors (RMSE) achieved from check points (CPs) were about 3.55 m, 9.70 m and 3.58 m in X, Y;and Z directions. This means that we can automatically correct the systematic error of RPC using SRTM DEM.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.121-127
• /
• 2016

We propose a algorithm to calculate power factor of fundamental waveform in an environment where the voltage and current have been distorted by harmonics. In the proposed power factor computation algorithm, voltage and current are converted to rotating DQ reference frame, and power factor is calculated from active power and reactive power. We compare the proposed method with the conventional power factor measurement method as mathematically. In a condition that voltage and current are distorted by harmonics, the proposed method accurately measure the power factor of fundamental wave, and it is confirmed by simulation using MATLAB. If the proposed power factor measurement method is applied to an automatic power factor control system, a power factor compensation performance can be maximized in harmonic distortion environment. As a result, it is possible to reduce electricity prices, reduce line loss, increase load capacity, ensure the transmission margin capacity, and reduce the amount of power generation.

• Journal of Korea Multimedia Society
• /
• v.20 no.8
• /
• pp.1447-1455
• /
• 2017

In a trawl-net simulation, it is very important to process the physical phenomenons resulting from real collisions between a net and fishes. However, because it is very difficult to reconstruct the surface with mass points, many researchers have generally detect the collision using an approximation model employing a sphere, a cube or a cylinder. These approaches occur often result in inaccurate movements of a fish due to the difference between a real-net and a designed-net. So, many systems have manually adjusted a net surface based on actual measurements of mass points. These methods are very inefficient because it needs much times in an adjustment and also causes more incorrect inputs according to a rapid increment in the number of points. Therefore, in this paper, we propose a reconstruction method that it semi-automatically reconstructed trawl-net surfaces using the equation of motion at each mass point in a mass-spring model. To get an easy start in a beginning step of the spread, it enables users to get interactive adjustment on each mass point. We had designed a trawl-net model using geometrical structures of trawl-net and then automatically reconstructed the trawl-net surface using scale-space meshing techniques. Last, we improve the accuracy of reconstructed result by correction user interaction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.1
• /
• pp.62-77
• /
• 2010

Emerging applications with high data rates will need to transport bulk data reliably in wireless sensor networks. ARQ (Automatic Repeat request) or Forward Error Correction (FEC) code schemes can be used to provide reliable transmission in a sensor network. However, the naive ARQ approach drops the whole frame, even though there is a bit error in the frame and the FEC at the bit level scheme may require a highly complex method to adjust the amount of FEC redundancy. We propose a bulk data transmission scheme based on erasure-resilient code in this paper to overcome these inefficiencies. The sender fragments bulk data into many small blocks, encodes the blocks with LT codes and packages several such blocks into a frame. The receiver only drops the corrupted blocks (compared to the entire frame) and the original data can be reconstructed if sufficient error-free blocks are received. An incidental benefit is that the frame error rate (FER) becomes irrelevant to frame size (error recovery). A frame can therefore be sufficiently large to provide high utilization of the wireless channel bandwidth without sacrificing the effectiveness of error recovery. The scheme has been implemented as a new data link layer in TinyOS, and evaluated through experiments in a testbed of Zigbex motes. Results show single hop transmission throughput can be improved by at least 20% under typical wireless channel conditions. It also reduces the transmission time of a reasonable range of size files by more than 30%, compared to a frame ARQ scheme. The total number of bytes sent by all nodes in the multi-hop communication is reduced by more than 60% compared to the frame ARQ scheme.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.8
• /
• pp.873-877
• /
• 2010

CAPTCHA is a security tool that prevents the automatic sign-up by a spam or a robot. This CAPTCHA usually depends on the smart readability of humans. However, the common and plain CAPTCHA with text-based system is not difficult to be solved by intelligent web-bot and machine learning tools. In this paper, we propose a new sub-image based CAPTCHA system totally different from the text based system. Our system offers a set of cropped sub-image from a whole digital picture and asks user to identify the correct orientation. Though there are some nice machine learning tools for this job, but they are useless for a cropped sub-images, which was clearly revealed by our experiment. Experiment showed that our sub-image based CAPTCHA is easy to human solver, but very hard to all kinds of machine learning or AI tools. Also our CAPTCHA is easy to be generated automatical without any human intervention.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.274-284
• /
• 2002

Word segmentation errors occurring in text preprocessing often insert incorrect words into recognition vocabulary and cause poor language models for Korean large vocabulary continuous speech recognition. We propose an automatic word segmentation algorithm using Markov chains and syllable-based n-gram language models in order to correct word segmentation error in teat corpora. We assume that a sentence is generated from a Markov chain. Spaces and non-space characters are generated on self-transitions and other transitions of the Markov chain, respectively Then word segmentation of the sentence is obtained by finding the maximum likelihood path using syllable n-gram scores. In experimental results, the algorithm showed 91.58% word accuracy and 96.69% syllable accuracy for word segmentation of 254 sentence newspaper columns without any spaces. The algorithm improved the word accuracy from 91.00% to 96.27% for word segmentation correction at line breaks and yielded the decomposition accuracy of 96.22% for compound-noun decomposition.