• 대한안전경영과학회지
• /
• 제1권1호
• /
• pp.69-77
• /
• 1999

One of the objectives of any task design is to provide a safe and helpful workplace for the employees. The safety and health module may include means for confronting the design with safety and health regulations and standards as well as tools for obstacles and collisions detection (such as error models and simulators), Virtual Reality is a leading edge technology which has only very recently become available on platforms and at prices accessible to the majority of simulation engineers. The design of an automated manufacturing system is a complicated, multidisciplinary task that requires involvement of several specialists. In this paper, a design procedure that facilitates the safety and ergonomic considerations of an automated manufacturing system are described. The procedure consists of the following major steps. Data collection and analysis of the data, creation of a three-dimensional simulation model of the work environment, simulation for safety analysis and risk assessment, development of safety solutions, selection of the preferred solutions, implementation of the selected solutions, reporting, and training. When improving the safety of an existing system the three-dimensional simulation model helps the designer to perceive the work from operators point of view objectively and safely without the exposure to hazards of the actual system.

• Nuclear Engineering and Technology
• /
• 제37권2호
• /
• pp.151-158
• /
• 2005

Advanced nuclear power plants are generally large complex systems automated by computers. Whenever a rare plant emergency occurs the plant operators must cope with the emergency under severe mental stress without committing any fatal errors. Furthermore, The operators must train to improve and maintain their ability to cope with every conceivable situation, though it is almost impossible to be fully prepared for an infinite variety of situations. In view of the limited capability of operators in emergency situations, there has been a new approach to preventing the human error caused by improper human-machine interaction. The new approach has been triggered by the introduction of advanced information systems that help operators recognize and counteract plant emergencies. In this paper, the adverse effect of automation in human-machine systems is explained. The discussion then focuses on how to configure a joint human-machine system for ideal human-machine interaction. Finally, there is a new proposal on how to organize technologies that recognize the different states of such a joint human-machine system.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.107-113
• /
• 2013

When the main spindle of high precision machine tools are run many hours, heat is generated in bearing parts of the inside of the spindle. Also, headstock is appeared distortion by inside and outside temperature difference of a machine. This paper studies method to measure behavior of machine tool about these thermal effects. In addition, it estimates measurement uncertainty factors which can be appeared in thermal effects measurement. Finding the factor of thermal affect measurement is important for estimation of measurement uncertainty. This paper measures thermal effects of high precision machine tools and evaluates the important factors of uncertainty.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.293-298
• /
• 2005

In this paper, we introduced a simulator to visualize the driving scenery of newly developed train called the K-AGT(Korea Automated Guideway Transit). The simulator consists of mainly two parts; control system and display system. In the control system, user can control the driving speed of the K-AGT, the driving environment(day and night), the operation of the train door and the screen door and user's views(driver's view, left window view, right window view, passenger's view). In the display system, immersive driving scenery generated by stereoscopic head mount display system and 3 channel PDP display system are displayed. We are expect to utilize the system to share the idea among customer, designer and constructor and verify the operating condition of the K-AGT intuitively.

• 음성과학
• /
• 제8권3호
• /
• pp.123-132
• /
• 2001

In recent years research on HCI technology has been very active and speech recognition is being used as its typical method. Its recognition, however, is deteriorated with the increase of surrounding noise. To solve this problem, studies concerning the multimodal HCI are being briskly made. This paper describes automated lipreading for bimodal speech recognition on the basis of image- and speech information. It employs audio-visual DB containing 1,074 words from 70 voice and tri-viseme as a recognition unit, and state tied HMM as a recognition model. Performance of automated recognition of 22 to 1,000 words are evaluated to achieve word recognition of 60.5% in terms of 22word recognizer.

• 한국CDE학회논문집
• /
• 제14권5호
• /
• pp.330-337
• /
• 2009

Nowadays a lot of high-tech electronic products such as TVs, monitors and camcorders are being developed. The more functions the electronic devices have, the more heat problems occur. Therefore, most of electronic products have air-ventilation holes to eliminate heat that is generated inside the products. The shapes of ventilation holes are usually complicated since aesthetic appearance of the products is important these days. In order to create those complicated shapes, designers should do time-consuming jobs because most of commercial CAD systems do not provide the functions that create patterns of lofted parts along freeform surfaces. In this research, an automated air-ventilation hole modeling system was proposed. The system generates patterns of lofted objects on freeform surfaces. Standard process to create air-ventilation holes manually was established, and vent-hole types and pattern types were classified into several categories. Designers can create many kinds of vent-holes by combining vent-hole types and pattern types. Users can also utilize user-defined pattern which can give users more flexibility. Developed system was applied to several design examples and the results are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.134-137
• /
• 2007

LMTT(Linear Motor-based Transfer Technology) 시스템은 항만 컨테이너 이송장치의 자동화 시템으로 기술적 포화상태에 이른 AGV (Automated Guided Vehicle)의 대체 수단으로 제안되었다. 본 논문에서는 PMLSM (Permanent Magnetic Linear Synchronous Motor)을 기본 구조로 한 LMTT에서 발생할 수 있는 레일과 차체간의 인척력 변화와 다양한 부하 중량에 대한 시스템 내부 변수의 변동에 적응할 수 있는 제어기 설계에 초점을 두었다. 그렇게 됨으로써 제어시 큰 방해요소로 작용하는 마찰력에 의한 백래쉬 및 데드존을 최소화하여 속응성 및 정밀도를 향상시키고자 하였다.

• 항공우주기술
• /
• 제7권1호
• /
• pp.61-67
• /
• 2008

무인항공기의 비행제어법칙 설계를 위하여 자동 제어기 이득 결정 프로그램을 개발하였다. 제어기 이득 결정 문제를 최적화 문제로 정식화 하고, 최적화 문제의 최적해로부터 제어기 이득을 결정하였다. 최적화 문제의 해를 계산하기 위해 진화연산기법의 하나인 PSO 알고리듬과 비선형 프로그래밍의 하나인 SQP 알고리듬을 연결하여 사용하였다. 이 방법을 통하여 최적해 계산 시간을 PSO 방법에 비하여 1/5로 감소시켰으며, 보다 정확한 최적해를 계산할 수 있었다.

• Computers and Concrete
• /
• 제17권6호
• /
• pp.761-786
• /
• 2016

This paper proposes an automated procedure for optimum seismic design of reinforced concrete (RC) frame structures. This procedure combines a smart pre-processing using a Tree Classification Method (TCM) and a nonlinear optimization technique. First, the TCM automatically creates sections database and assigns sections to structural members. Subsequently, a real valued model of Particle Swarm Optimization (PSO) algorithm is employed in solving the optimization problem. Numerical examples on design optimization of three low- to high-rise RC frame structures under earthquake loads are presented with and without considering strong column-weak beam (SCWB) constraint. Results demonstrate the effectiveness of the TCMin seismic design optimization of the structures.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권8호
• /
• pp.37-45
• /
• 2022

This study attempts to understand the relationship between accounting information systems AIS and firms' performance; in the first part of the study, a brief introduction that focuses on the technological advancements and the impact of such advancements on the business world, and in the second part, a review of literature that considered different perspectives on the relationship between AIS and firms' performance. The key differences between manual and automated systems were shown in a table later in the literature review, followed by explanations for each comparison aspect. In the third part, four questions are asked regarding the AIS implementation; the questions covered the top management commitment, the users' competencies, the quality of the adopted system, and the impact of the degree of technological investment on the implementation process. Data for the study was acquired from a Saudi SME. The study's purpose is to investigate the impact of AIS on organizational performance in Saudi SMEs. The presented ideas of this study, where the main finding of the study is that AIS implementation has a positive impact on firms' performance.