• Journal of the Korea Institute of Building Construction
• /
• v.7 no.3
• /
• pp.67-73
• /
• 2007

Increasing wages and decreasing skilled labors are problems awaiting solution. The development of automatic technologies contributes to accelerating the one of construction automation. Thus, this study is to suggest the way to develop the automated building construction system base on one performed in Japan in order to solve urgent problems of construction industry in Korea. Therefore interviews and questionnaires were performed based on experts who work for the automated building construction system field and analyzed through analytic hierarchy process. In doing so, it was the most important factor to develop a branch of automatic, mechanical or machine technologies for the automated building construction system. Especially the study indicated the importance of the technologies to substitute skilled labors such as a robot. This research could contribute to developing the automated building construction which is very unique and suitable for construction industry in Korea.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.422-430
• /
• 1996

The automated scanning laser Doppler vibrometer (LDV) has been designed, and built to measure in-plane displacements associated with waves propagating on vibrating structures. Use of optical fibers allows the compact design of a laser probe head which can be scanned over the vibrating structures. An algorithm for automated self-alignment of the laser probe is developed. The system is completely automated for scanning over the structures, focusing two laser beams at each data point until the detected vibration signal is stable, and for recording and transferring the data to a system computer. The automated system allows one to get extensive data of the vibration field over the structures. The system is tested by scanning a piezoelectric cylindrical shell and a plate excited by a continuous signal and by a pulse signal, respectively. Results show that the automated scanning LDV system can be a useful tool to measure the in-plane vibration field and to detect the elastic waves propagating on the vibrating structures.

• The KIPS Transactions:PartD
• /
• v.10D no.1
• /
• pp.101-108
• /
• 2003

Construction of automated terminal it urgently demanded to gain the foundation of hub-port in north east Asia. Therefore we suggest an adequate operating system layout of automated terminal in Korea. In this paper the aim of automated terminal operating system is satisfied. four basic models are divided according to moving course of export and import cargo of each automated equipments, several input data are changed and analyzed dynamically by Trial and Error method, and then an optimized operating system model is selected, and designed for yard operating system layout on the basis of the selected model. Particularly, the productivity of automated port is up to the kind of automated equipments. However, because expense and present work process must be considered actually. In order to prevent confusion of the work, the method to optimize the present work and substitute prevent equipments and automated equipments was designed. It is a premise that ail the yard equipments described in this paper must be automatic except quay crane.

• IE interfaces
• /
• v.18 no.4
• /
• pp.431-443
• /
• 2005

This paper describes a web-based system called DESIGNER for the analysis and design for automated material handling equipment(MHE) applications in manufacturing. DESIGNER models the processes for system integration, economic analysis, performance analysis, and automated storage/retrieval system(AS/RS) design. Based on the information specified by users, the various analysis modules are invoked to meet the needs of the material handling applications. The results of the analyses provide system users with useful data for material handling system design and decision on investment in automated MHE. Example problems are also presented to demonstrate the use of the system.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.3
• /
• pp.339-349
• /
• 2015

A large-scale research project to develop a robot-based automated building construction system for steel structures was successfully conducted in South Korea. This paper discusses the results of the real-scale test and the key lessons gained from the testing process. The system was assessed in terms of system productivity, construction cost, quality control, and safety improvements. While the productivity of the automated system showed an improvement of about 9.5%, the construction cost was about six times higher than that of the conventional method. The field test also indicated that the automated system requires more on-site quality control measures. However, because the system can eliminate the causes of various safety accidents, safety levels might be expected to be improved significantly. It is expected that this paper will provide knowledge and insight for developing new systems, and the results of the real-scale test might be useful for other researchers and similar research projects in the future.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1992.04b
• /
• pp.249-257
• /
• 1992

An automated machining system involves concurrent use of manufacturing resources, alternative process plans, and flexible routings. High investment in the installation of automated facilities requires an efficient scheduling system that is able to allocate the resources specified for operations over a scheduling horizon. The primary emphasis of this paper is to generate schedules that accurately reflect details of the automated environment and the objectives stated for the system. In this paper, a scheduling algorithm for automated machining is presented. Using the previous simulation research for this topic, a rule-based scheduling system is constructed. An architecture for an intelligent scheduling system is proposed, and the system has a high potential to provide efficient schedules based on the task-specific knowledge for the dynamic scheduling environment

• Journal of the Korean Society of Systems Engineering
• /
• v.11 no.2
• /
• pp.137-146
• /
• 2015

This paper addresses the definition of the driver's functions for an automated vehicle of level 3, as defined by the Society of Automotive Engineers. By combining the constituent systems surrounding the automated vehicles in specific use cases, their interactions could be refined in a stepwise approach. This approach enables traceability of interactions between drivers, automated driving systems, and other constituent systems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.709-714
• /
• 2023

A flexible planning system is an important element for the robot to perform various tasks. In this paper, we introduce an automated planning system architecture that can deal with the changing environment. PDDL is used for symbolic-based task planning, and a graph database is used for real-time environment information updates for automated PDDL generation. The proposed framework was verified through scenario-based experiments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.657-658
• /
• 2013

• Korean Management Science Review
• /
• v.29 no.1
• /
• pp.131-141
• /
• 2012

The automated material handling systems today are playing ever more important roles in semiconductor/LCD fabrication facilities. Recently they became more flexible, intelligent, and speedy than in the past. The facilities have been fully automated because the size and weight of the unit loads used in the facilities were being increased beyond the limits that a human operator can handle. This research develops an efficient procedure to streamline the delivery of unit loads by the automated material handling system (AMHS). For this task, the research employs the event scheduling theory that has been successfully used in the both academia and industry. The developed procedure was applied to an actual LCD fabrication facility and improved the performance of an existing material handling system.