• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.21-25
• /
• 2010

In response to the industrial needs for automated handling of very thin solar cell wafers, this paper presents the design concept for the individual wafer separation from the stacked wafers by utilizing continuous water jet. The experimental apparatus for automated wafer separation was constructed and it includes the water jet system and the microprocessor controlled wafer stack advancing system. Through a series of tests, the performance of the proposed design is quantified into the success rate of single wafer separation and the rapidity of processing wafer stack. Also, the inclination angle of wafer equipped cartridge and the water jet flowrate are found to be important parameters to be considered for process optimization. The proposed design shows the concept for fast and efficient processing of wafer separation and can be implemented in the automated manufacturing of silicon based solar cell wafers.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.125-130
• /
• 2013

In this paper, in order to overcome shortcomings of manual inspection for the automotive PWM Shaft, we developed an automated inline inspection system. The automated inline inspection system consists of the work feeder unit, conveying unit, outer diameter check unit, run-out and roundness check unit, machine vision, defective separation unit and status alarm unit. We used the machine vision system for automatic inspection process and designed the inline systems for automatic feeding and selecting process. Also the repeated operation test was performed in order to verify the precision and reliability of the proposed automated inline inspection system.

• International Journal of Aeronautical and Space Sciences
• /
• v.2 no.2
• /
• pp.1-18
• /
• 2001

A numerical technique for simulating the separation dynamics of strap-on boosters jettisoned in the dense atmosphere is presented. Six degree of freedom rigid body equations of motion are integrated into the three-dimensional unsteady Navier-Stokes solution procedure to determine the dynamic motions of strap-ons. An automated Chimera overlaid grid technique is introduced to achieve maximum efficiency for multi-body dynamic motion and a domain division technique is implemented in order to reduce the computational cost required to find interpolation points in the Chimera grids. The flow solver is validated by comparing the computed results around the Titan IV launch vehicle with experimental data. The complete analysis process is then applied to the. H-II launch vehicle, the central rocket in japans space program, the CZ-3C launch vehicle developed in China and the KSR-III, a three-stage sounding rocket being developed in Korea. From the analyses, separation trajectories of strap-on boosters are predicted and aerodynamic characteristics around the vehicles at every time interval are examined. In addition, separation-impulse devices generally introduced for safe separation of strap-ons are properly modeled in the present paper and the jettisoning force requirements are examined quantitatively.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.715-720
• /
• 1989

The individual control of machines or processors is subordinate to the management of the entire manufacturing production function. This distinction is necessary in order to provide the appropriate separation of and detailed focus on process activities while still providing acceptable interfaces for the upload of data and the download of instructions, recipes, or commands.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3020-3033
• /
• 1999

Role-Based Access Control(RBAC) security policy is being widely accepted not only as an access control policy for information security but as both a natural modeling tool for management structure of organizations and flexible permission management framework in various commercial environments. Important functions provided by the current RBAC model are to administrate the information on the components of RBAC model and determine whether user's access request to information is granted or not, and most researches on RBAC are for defining the model itself, describing it in formal method and other important properties such as separation of duty. As the current RBAC model which does not define the definition, design and operation for applications is not suitable for automated information systems that consist of various applications, it is needed that how applications should be designed and then executed based on RBAC security model. In this paper, we describe dynamic properties of session which is taken for a passive entity only activated by users, as a vehicle for building and executing applications in an automated information systems. And, a framework for session-oriented separation of duty property, application design and operation is also presented.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.2039-2044
• /
• 2011

A semi-continuous and automated method for quantifying atmospheric ammonia at the parts per billion level has been developed. The instrument consists of a high efficiency diffusion scrubber, an electrolytic on-line anion exchange device, and a conductivity detector. Water soluble gases in sampled air diffuse through the porous membrane and are absorbed in an absorbing solution. Interferences are eliminated by using an anion exchange devises. The electrical conductivity of the solution is measured without chromatographic separation. The collection efficiency was over 99%. Over the 0-200 ppbv concentration range, the calibration was linear with $r^2$ = 0.99. The lower limit of detection was 0.09 ppbv. A parallel analysis of Seoul air over several days using this method and a diffusion scrubber coupled to an ion chromatography system showed acceptable agreement, $r^2$ = 0.940 (n = 686). This method can be applied for ambient air monitoring of ammonia.

• Analytical Science and Technology
• /
• v.33 no.6
• /
• pp.274-284
• /
• 2020

This study described the analytical method for simultaneous determination of 89Sr and 90Sr in liquid sample using automated separation system. Radiostrontium in 0.5 kg of liquid sample was concentrated as SrCO3 to reduce the volume of sample, and purified from the sample using Sr-resin 2 mL (BV, Bed volume). The behavior of Sr and interferences such as Ba, Ca and Y were estimated with various flow rate ranging from 1 to 4 mL min-1. The detailed procedure for the purification of Sr on Sr-resin was presented. The purified radiostronitum was measured in Cerenkov mode and then measured in Scintillation mode by mixing scintillation cocktail. The measured value in both modes were used to calculate the activity of 89Sr and 90Sr. The performance tests were carried out the lab-control-sample having various activity ratio of between 89Sr and 90Sr. The recovery of Sr was ranged from 68 to 94 %. The relative bias of 89Sr activity was ranged from -5 to 20 %, and it was ranged from -10 to 10 % for 90Sr.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.272-272
• /
• 2017

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.900-901
• /
• 2023

본 연구는 TFLite 기반의 경량화 AI 모델을 활용하여 쓰레기의 자동 분리수거 시스템을 구축하는 방법을 제안한다. 제안된 시스템은 객체 인식 기술을 활용해 쓰레기를 정확하게 분류하며, 테스트 결과 평균 90.33%의 mAP 성능을 나타낸다. Label 수와 데이터셋의 한계가 존재하지만, 본 연구를 확장하고 개선함으로써 자동 분리수거의 효율성을 더욱 높일 수 있을 것으로 기대된다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.107-114
• /
• 2003

This study investigated the effect of 2-methoxy ethanol (2-Me) non-solvent as additive included in casting solution. Macroporous polymer membranes were prepared by using polyethersufone (PES)/N-methyl-2-pyrrolidone (NMP)/2-Me casting solution and water coagulant. The phase separation co-process of the vapor-induced phase separation (VIPS) and liquid-induced phase separation (LIPS) were used by means of membrane preparation method. The pore size and pore size distribution were controlled with additive (non-solvent), and measured with Automated Perm Porometer. By increasing additive (non-solvent) in the casting solution, the membranes produced changed from finger structure to sponge structure. That is due to the different diffusion rates. At slow diffusion process, sponge-like structure was formed and at fast diffusion process, finger-like structure was formed. Also relative humidity, evaporation time, temperature of casting solution and coagulation bath etc. had effects on the pore size distribution and the porosity of the membrane.